Re: [PATCH 2/2 v2] mfd: arizona: Mark additional registers as volatile
From: Lee Jones
Date: Thu Aug 21 2014 - 08:02:01 EST
On Wed, 13 Aug 2014, Charles Keepax wrote:
> Mark some additional registers as volatile. The write sequencer control
> registers should not be cached, as we don't ever want their value
> synchronised as this might cause a write sequence to be accidentally
> initiated.
>
> Additionally, the DAC_COMP registers require special preconditions to
> write so there values wouldn't be updated accurately during a register
> sync.
>
> Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
> drivers/mfd/wm5102-tables.c | 11 ++++++++---
> drivers/mfd/wm5110-tables.c | 6 +++---
> 2 files changed, 11 insertions(+), 6 deletions(-)
Applied, thanks.
> diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
> index c18d527..191f224 100644
> --- a/drivers/mfd/wm5102-tables.c
> +++ b/drivers/mfd/wm5102-tables.c
> @@ -245,9 +245,6 @@ const struct regmap_irq_chip wm5102_irq = {
> static const struct reg_default wm5102_reg_default[] = {
> { 0x00000008, 0x0019 }, /* R8 - Ctrl IF SPI CFG 1 */
> { 0x00000009, 0x0001 }, /* R9 - Ctrl IF I2C1 CFG 1 */
> - { 0x00000016, 0x0000 }, /* R22 - Write Sequencer Ctrl 0 */
> - { 0x00000017, 0x0000 }, /* R23 - Write Sequencer Ctrl 1 */
> - { 0x00000018, 0x0000 }, /* R24 - Write Sequencer Ctrl 2 */
> { 0x00000020, 0x0000 }, /* R32 - Tone Generator 1 */
> { 0x00000021, 0x1000 }, /* R33 - Tone Generator 2 */
> { 0x00000022, 0x0000 }, /* R34 - Tone Generator 3 */
> @@ -1881,6 +1878,10 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
> switch (reg) {
> case ARIZONA_SOFTWARE_RESET:
> case ARIZONA_DEVICE_REVISION:
> + case ARIZONA_WRITE_SEQUENCER_CTRL_0:
> + case ARIZONA_WRITE_SEQUENCER_CTRL_1:
> + case ARIZONA_WRITE_SEQUENCER_CTRL_2:
> + case ARIZONA_WRITE_SEQUENCER_CTRL_3:
> case ARIZONA_OUTPUT_STATUS_1:
> case ARIZONA_RAW_OUTPUT_STATUS_1:
> case ARIZONA_SLIMBUS_RX_PORT_STATUS:
> @@ -1892,6 +1893,10 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
> case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
> case ARIZONA_FLL1_NCO_TEST_0:
> case ARIZONA_FLL2_NCO_TEST_0:
> + case ARIZONA_DAC_COMP_1:
> + case ARIZONA_DAC_COMP_2:
> + case ARIZONA_DAC_COMP_3:
> + case ARIZONA_DAC_COMP_4:
> case ARIZONA_FX_CTRL2:
> case ARIZONA_INTERRUPT_STATUS_1:
> case ARIZONA_INTERRUPT_STATUS_2:
> diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
> index 9b98ee5..beae0a3 100644
> --- a/drivers/mfd/wm5110-tables.c
> +++ b/drivers/mfd/wm5110-tables.c
> @@ -666,9 +666,6 @@ static const struct reg_default wm5110_reg_default[] = {
> { 0x0000000A, 0x0001 }, /* R10 - Ctrl IF I2C2 CFG 1 */
> { 0x0000000B, 0x0036 }, /* R11 - Ctrl IF I2C1 CFG 2 */
> { 0x0000000C, 0x0036 }, /* R12 - Ctrl IF I2C2 CFG 2 */
> - { 0x00000016, 0x0000 }, /* R22 - Write Sequencer Ctrl 0 */
> - { 0x00000017, 0x0000 }, /* R23 - Write Sequencer Ctrl 1 */
> - { 0x00000018, 0x0000 }, /* R24 - Write Sequencer Ctrl 2 */
> { 0x00000020, 0x0000 }, /* R32 - Tone Generator 1 */
> { 0x00000021, 0x1000 }, /* R33 - Tone Generator 2 */
> { 0x00000022, 0x0000 }, /* R34 - Tone Generator 3 */
> @@ -2815,6 +2812,9 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg)
> switch (reg) {
> case ARIZONA_SOFTWARE_RESET:
> case ARIZONA_DEVICE_REVISION:
> + case ARIZONA_WRITE_SEQUENCER_CTRL_0:
> + case ARIZONA_WRITE_SEQUENCER_CTRL_1:
> + case ARIZONA_WRITE_SEQUENCER_CTRL_2:
> case ARIZONA_HAPTICS_STATUS:
> case ARIZONA_SAMPLE_RATE_1_STATUS:
> case ARIZONA_SAMPLE_RATE_2_STATUS:
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/