Re: [PATCH 1/2] doc: dt/bindings: input: introduce TI DRV2667 haptic driver description

[Sergei Shtylyov]

Hello.

On 08/21/2014 10:19 PM, Dan Murphy wrote:

> DRV2667 is a haptic/vibrator driver for Linear Resonant Actuators.
> Adding dt binding for this part

> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> ---
>   .../devicetree/bindings/input/ti,drv2667.txt       |   18 ++++++++++++++++++
>   1 file changed, 18 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt

> diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt
> new file mode 100644
> index 0000000..525216d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/ti,drv2667.txt
> @@ -0,0 +1,18 @@
> +Texas Instruments - drv2667 Haptics driver
> +
> +The drv2667 uses serial control bus communicates through I2C protocols

   I can't parse that.

> +
> +Required properties:
> +	- compatible - "ti,drv2667" - DRV2667
> +	- reg -  I2C slave address
> +	- vbat-supply - Required supply regulator
> +
> +Example:
> +
> +drv2667: drv2667@59 {
> +		compatible = "ti,drv2667";
> +		reg = <0x59>;

   You say "vbat-supply" is mandatory, yet you don't have it in your example?

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/