[PATCH v1 1/8][SCSI] mpt3sas: MPI2.5 Rev G (2.5.2) specifications

From: Sreekanth Reddy
Date: Sat Aug 23 2014 - 08:12:28 EST

Below is the change set in MPI2.5 Rev G specification and 2.00.31 header files
1) Added SCSIStatusQualifier to SCSI IO Error Reply message.
2) Added ATA Security Freeze Lock to IO Unit Page 1 Flags field.
3) Added Allow Protection Information bit for IR Volume Create.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxxxxxxxx>
Reviewed-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
---
drivers/scsi/mpt3sas/mpi/mpi2.h | 6 ++++--
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 8 ++++++--
drivers/scsi/mpt3sas/mpi/mpi2_init.h | 6 ++++--
drivers/scsi/mpt3sas/mpi/mpi2_raid.h | 6 +++++-
4 files changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
index 20da8f9..dc143dd 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
@@ -8,7 +8,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.29
+ * mpi2.h Version: 02.00.31
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -86,6 +86,8 @@
* 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT.
* 12-20-12 02.00.29 Bumped MPI2_HEADER_VERSION_UNIT.
* Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET.
+ * 04-09-13 02.00.30 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
*/

@@ -119,7 +121,7 @@
#define MPI2_VERSION_02_05 (0x0205)

/*Unit and Dev versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x1D)
+#define MPI2_HEADER_VERSION_UNIT (0x1F)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index 889aa70..5b0e5c1 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.24
+ * mpi2_cnfg.h Version: 02.00.25
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -160,6 +160,9 @@
* 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as
* obsolete for MPI v2.5 and later.
* Added some defines for 12G SAS speeds.
+ * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK.
+ * Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to
+ * match the specification.
* --------------------------------------------------------------------------
*/

@@ -792,6 +795,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 {
#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04)

/*IO Unit Page 1 Flags defines */
+#define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000)
#define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000)
#define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000)
#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800)
@@ -870,7 +874,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00)

/*defines for IO Unit Page 5 DmaEngineCapabilities field */
-#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFF00)
+#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFFFF0000)
#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16)

#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
index f7928bf..b3e3331 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
@@ -6,7 +6,7 @@
* Title: MPI SCSI initiator mode messages and structures
* Creation Date: June 23, 2006
*
- * mpi2_init.h Version: 02.00.14
+ * mpi2_init.h Version: 02.00.15
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -44,6 +44,8 @@
* Priority to match SAM-4.
* Added EEDPErrorOffset to MPI2_SCSI_IO_REPLY.
* 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION.
+ * 04-09-13 02.00.15 Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY,
+ * replacing the Reserved4 field.
* --------------------------------------------------------------------------
*/

@@ -347,7 +349,7 @@ typedef struct _MPI2_SCSI_IO_REPLY {
U32 SenseCount; /*0x18 */
U32 ResponseInfo; /*0x1C */
U16 TaskTag; /*0x20 */
- U16 Reserved4; /*0x22 */
+ U16 SCSIStatusQualifier; /* 0x22 */
U32 BidirectionalTransferCount; /*0x24 */
U32 EEDPErrorOffset; /*0x28 *//*MPI 2.5 only; Reserved in MPI 2.0*/
U32 Reserved6; /*0x2C */
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h
index 7176523..fbe3aae 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h
@@ -6,7 +6,7 @@
* Title: MPI Integrated RAID messages and structures
* Creation Date: April 26, 2007
*
- * mpi2_raid.h Version: 02.00.09
+ * mpi2_raid.h Version: 02.00.10
*
* Version History
* ---------------
@@ -30,6 +30,7 @@
* 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN.
* 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR.
* Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define.
+ * 04-17-13 02.00.10 Added MPI25_RAID_ACTION_ADATA_ALLOW_PI.
* --------------------------------------------------------------------------
*/

@@ -46,6 +47,9 @@
* RAID Action messages
****************************************************************************/

+/* ActionDataWord defines for use with MPI2_RAID_ACTION_CREATE_VOLUME action */
+#define MPI25_RAID_ACTION_ADATA_ALLOW_PI (0x80000000)
+
/*ActionDataWord defines for use with MPI2_RAID_ACTION_DELETE_VOLUME action */
#define MPI2_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000)
#define MPI2_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000001)
--
2.0.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/