Re: [PATCH v9 04/12] PCI: OF: Fix the conversion of IO ranges into IO resources.

[Rob Herring]

On Fri, Aug 22, 2014 at 8:06 AM, Liviu Dudau <liviu@xxxxxxxxxxx> wrote:
> On Thu, Aug 21, 2014 at 11:08:48PM -0500, Rob Herring wrote:
>> On Tue, Aug 12, 2014 at 11:25 AM, Liviu Dudau <Liviu.Dudau@xxxxxxx> wrote:
>> > The ranges property for a host bridge controller in DT describes
>> > the mapping between the PCI bus address and the CPU physical address.
>> > The resources framework however expects that the IO resources start
>> > at a pseudo "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT.
>> > The conversion from pci ranges to resources failed to take that into account.
>> >
>> > In the process move the function into drivers/of/address.c as it now
>> > depends on pci_address_to_pio() code and make it return an error code.
>> >
>> > Cc: Grant Likely <grant.likely@xxxxxxxxxx>
>> > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>>
>> Humm, this says I'm cc'ed, but I'm not which defeats the point of
>> recording the Cc's in the commit.
>
> Appologies, I've screwed up my git send-email arguments.
>
>>
>> I still have the same concerns that this will break existing users.
>> Are you sure integrator is the only platform affected?
>
> microblaze and powerpc have their similar handcoded routine for parsing ranges
> where they pre-compute the io_base and adjust the values again when registering
> resources. I'm not absolutely sure they are not broken as I lack the appropriate
> platforms to test (I've been asking for an FPGA engineer to build me a microblaze
> image with all the bits included but haven't received anything yet and it is
> possible Xilinx has now shifted their interests towards ARM + PCI as the ML605
> board that I have seems to have been discontinued).

I will settle for "I've read through the $arch code and believe they
are not broken". It is unrealistic for you to test on everything.

> mips is doing the same thing and I believe is not affected, pci-host-generic.c
> was adjusting the returned values afterwards so that will not be needed and Lorenzo
> has a patch for the driver to adapt it to this series anyway.
>
> pcie-designware.c also recalculates the io.start and io.end values, so that's fine
> for now. The only ones that I believe are still affected are pci-tegra.c and
> pcie-rcar.c for which I will need to provide a patch similar to integrator unless
> the code gets converted to the new range parsing.

Well, the latter would be nice, but they certainly have to be fixed.
Now that I think about it, this needs to be handled in a bisectable
way. So I think you need to fix all affected platforms in this patch
rather than a separate patch as you have done.

Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/