[PATCH] staging:r8190_rtl8256: coding style: Fixed commenting style
From: Sanjeev Sharma
Date: Mon Aug 25 2014 - 03:13:05 EST
This is a patch to the r8190_rtl8256.c file that fixes
commenting style Error
Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@xxxxxxxxxx>
---
drivers/staging/rtl8192u/r8190_rtl8256.c | 59 +++++++++++++++++---------------
1 file changed, 31 insertions(+), 28 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.c b/drivers/staging/rtl8192u/r8190_rtl8256.c
index 43ed768..8fe35ad 100644
--- a/drivers/staging/rtl8192u/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192u/r8190_rtl8256.c
@@ -61,13 +61,15 @@ void PHY_SetRF8256Bandwidth(struct net_device *dev , HT_CHANNEL_WIDTH Bandwidth)
break;
case HT_CHANNEL_WIDTH_20_40:
if (priv->card_8192_version == VERSION_819xU_A || priv->card_8192_version == VERSION_819xU_B) { /* 8256 D-cut, E-cut, xiong: consider it later! */
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); //phy para:3ba
+ rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); /* phy para:3ba */
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3df);
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0a1);
- //cosa add for sd3's request 01/23/2008
+ /* cosa add for sd3's request 01/23/2008
+ *
+ */
if (priv->chan == 3 || priv->chan == 9)
- //I need to set priv->chan whenever current channel changes
+ /* I need to set priv->chan whenever current channel changes */
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x59b);
else
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab);
@@ -91,11 +93,12 @@ void PHY_SetRF8256Bandwidth(struct net_device *dev , HT_CHANNEL_WIDTH Bandwidth)
void PHY_RF8256_Config(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- // Initialize general global value
- //
- // TODO: Extend RF_PATH_C and RF_PATH_D in the future
+ /* Initialize general global value
+ *
+ * TODO: Extend RF_PATH_C and RF_PATH_D in the future
+ */
priv->NumTotalRFPath = RTL819X_TOTAL_RF_PATH;
- // Config BB and RF
+ /* Config BB and RF */
phy_RF8256_Config_ParaFile(dev);
}
/*--------------------------------------------------------------------------
@@ -107,10 +110,11 @@ void PHY_RF8256_Config(struct net_device *dev)
void phy_RF8256_Config_ParaFile(struct net_device *dev)
{
u32 u4RegValue = 0;
- //static s1Byte szRadioAFile[] = RTL819X_PHY_RADIO_A;
- //static s1Byte szRadioBFile[] = RTL819X_PHY_RADIO_B;
- //static s1Byte szRadioCFile[] = RTL819X_PHY_RADIO_C;
- //static s1Byte szRadioDFile[] = RTL819X_PHY_RADIO_D;
+ /* static s1Byte szRadioAFile[] = RTL819X_PHY_RADIO_A;
+ * static s1Byte szRadioBFile[] = RTL819X_PHY_RADIO_B;
+ * static s1Byte szRadioCFile[] = RTL819X_PHY_RADIO_C;
+ * static s1Byte szRadioDFile[] = RTL819X_PHY_RADIO_D;
+ */
u8 eRFPath;
BB_REGISTER_DEFINITION_T *pPhyReg;
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -119,19 +123,17 @@ void phy_RF8256_Config_ParaFile(struct net_device *dev)
u32 RF3_Final_Value = 0;
u8 ConstRetryTimes = 5, RetryTimes = 5;
u8 ret = 0;
- //3//-----------------------------------------------------------------
- //3// <2> Initialize RF
- //3//-----------------------------------------------------------------
+ /* Initialize RF */
for (eRFPath = (RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath < priv->NumTotalRFPath; eRFPath++) {
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
continue;
pPhyReg = &priv->PHYRegDef[eRFPath];
- // Joseph test for shorten RF config
- // pHalData->RfReg0Value[eRFPath] = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, rGlobalCtrl, bMaskDWord);
-
- /*----Store original RFENV control type----*/
+ /* Joseph test for shorten RF config
+ * pHalData->RfReg0Value[eRFPath] = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, rGlobalCtrl, bMaskDWord);
+ * ----Store original RFENV control type
+ */
switch (eRFPath) {
case RF90_PATH_A:
case RF90_PATH_C:
@@ -150,13 +152,14 @@ void phy_RF8256_Config_ParaFile(struct net_device *dev)
rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
/* Set bit number of Address and Data for RF register */
- rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); // Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258
- rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); // Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ???
+ rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); /* Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258 */
+ rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); /* Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ??? */
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf);
- /*----Check RF block (for FPGA platform only)----*/
- // TODO: this function should be removed on ASIC , Emily 2007.2.2
+ /* Check RF block (for FPGA platform only)----
+ * TODO: this function should be removed on ASIC , Emily 2007.2.2
+ */
if (rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (RF90_RADIO_PATH_E)eRFPath)) {
RT_TRACE(COMP_ERR, "PHY_RF8256_Config():Check Radio[%d] Fail!!\n", eRFPath);
goto phy_RF8256_Config_ParaFile_Fail;
@@ -231,11 +234,11 @@ void PHY_SetRF8256CCKTxPower(struct net_device *dev, u8 powerlevel)
{
u32 TxAGC = 0;
struct r8192_priv *priv = ieee80211_priv(dev);
- //modified by vivi, 20080109
+ /* modified by vivi, 20080109 */
TxAGC = powerlevel;
if (priv->bDynamicTxLowPower == TRUE) {
- //cosa 05/22/2008 for scan
+ /* cosa 05/22/2008 for scan */
if (priv->CustomerID == RT_CID_819x_Netcore)
TxAGC = 0x22;
else
@@ -251,15 +254,15 @@ void PHY_SetRF8256CCKTxPower(struct net_device *dev, u8 powerlevel)
void PHY_SetRF8256OFDMTxPower(struct net_device *dev, u8 powerlevel)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- //Joseph TxPower for 8192 testing
+ /* Joseph TxPower for 8192 testing */
u32 writeVal, powerBase0, powerBase1, writeVal_tmp;
u8 index = 0;
u16 RegOffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
u8 byte0, byte1, byte2, byte3;
- powerBase0 = powerlevel + priv->TxPowerDiff; //OFDM rates
+ powerBase0 = powerlevel + priv->TxPowerDiff; /* OFDM rates */
powerBase0 = (powerBase0<<24) | (powerBase0<<16) | (powerBase0<<8) | powerBase0;
- powerBase1 = powerlevel; //MCS rates
+ powerBase1 = powerlevel; /* MCS rates */
powerBase1 = (powerBase1<<24) | (powerBase1<<16) | (powerBase1<<8) | powerBase1;
for (index = 0; index < 6; index++) {
@@ -279,7 +282,7 @@ void PHY_SetRF8256OFDMTxPower(struct net_device *dev, u8 powerlevel)
if (byte3 > 0x24)
byte3 = 0x24;
- //for tx power track
+ /* for tx power track */
if (index == 3) {
writeVal_tmp = (byte3<<24) | (byte2<<16) | (byte1<<8) | byte0;
priv->Pwr_Track = writeVal_tmp;
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/