Re: [PATCH 3/4] watchdog: add driver for Ricoh RN5T618 watchdog

[Lee Jones]

On Wed, 27 Aug 2014, Guenter Roeck wrote:
> On Wed, Aug 27, 2014 at 12:13:56AM +0200, Beniamino Galvani wrote:
> > This adds a driver for the watchdog timer available in Ricoh RN5T618
> > PMIC. The device supports a programmable expiration time of 1, 8, 32
> > or 128 seconds.
> > 
> > Signed-off-by: Beniamino Galvani <b.galvani@xxxxxxxxx>
> > ---
> >  drivers/watchdog/Kconfig       |   11 +++
> >  drivers/watchdog/Makefile      |    1 +
> >  drivers/watchdog/rn5t618_wdt.c |  196 ++++++++++++++++++++++++++++++++++++++++
> >  include/linux/mfd/rn5t618.h    |    4 +
> >  4 files changed, 212 insertions(+)
> >  create mode 100644 drivers/watchdog/rn5t618_wdt.c

[...]

> > +++ b/drivers/watchdog/rn5t618_wdt.c
> > @@ -0,0 +1,196 @@

[...]

> > +static int rn5t618_wdt_set_timeout(struct watchdog_device *wdt_dev,
> > +				   unsigned int timeout)
> > +{
> > +	struct rn5t618_wdt *wdt = watchdog_get_drvdata(wdt_dev);
> > +	int ret, i;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(rn5t618_wdt_map); i++) {
> > +		if (rn5t618_wdt_map[i].time + 1 >= timeout)
> > +			break;
> > +	}
> > +
> > +	if (i == ARRAY_SIZE(rn5t618_wdt_map))
> > +		ret = -EINVAL;
> 
> Can you simplify this a bit ? If you use
> 
> 	if (i == ARRAY_SIZE(rn5t618_wdt_map))
> 		return -EINVAL;

This changes the semantics.

> > +	else
> 
> You can drop this else statement.
> 
> > +		ret = regmap_update_bits(wdt->rn5t618->regmap, RN5T618_WATCHDOG,
> > +					 RN5T618_WATCHDOG_WDOGTIM_M,
> > +					 rn5t618_wdt_map[i].reg_val);
> > +	if (!ret)
> > +		wdt_dev->timeout = rn5t618_wdt_map[i].time;

... Isn't this important?

> > +	return ret;
> > +}

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/