Re: [PATCH v4] spi: spi-imx: add DMA support

From: Robin Gong
Date: Thu Aug 28 2014 - 06:08:22 EST


On Wed, Aug 27, 2014 at 11:12:08AM +0530, sanjeev sharma wrote:
> On Sat, Aug 23, 2014 at 5:43 AM, Robin Gong <b38343@xxxxxxxxxxxxx> wrote:
>
> > + /*
> > + * Configure the DMA register: setup the watermark
> > + * and enable DMA request.
> > + */
> > + if (spi_imx->dma_is_inited) {
> > + dma = readl(spi_imx->base + MX51_ECSPI_DMA);
> > +
> > + spi_imx->tx_wml = spi_imx_get_fifosize(spi_imx) / 2;
> > + spi_imx->rx_wml = spi_imx_get_fifosize(spi_imx) / 2;
> > + spi_imx->rxt_wml = spi_imx_get_fifosize(spi_imx) / 2;
> > + rx_wml_cfg = spi_imx->rx_wml <<
> > MX51_ECSPI_DMA_RX_WML_OFFSET;
> > + tx_wml_cfg = spi_imx->tx_wml <<
> > MX51_ECSPI_DMA_TX_WML_OFFSET;
> > + rxt_wml_cfg = spi_imx->rxt_wml <<
> > MX51_ECSPI_DMA_RXT_WML_OFFSET;
> > + dma = (dma & ~MX51_ECSPI_DMA_TX_WML_MASK
> > + & ~MX51_ECSPI_DMA_RX_WML_MASK
> > + & ~MX51_ECSPI_DMA_RXT_WML_MASK)
> > + | rx_wml_cfg | tx_wml_cfg | rxt_wml_cfg
> > + |(1 << MX51_ECSPI_DMA_TEDEN_OFFSET)
> > + |(1 << MX51_ECSPI_DMA_RXDEN_OFFSET)
> > + |(1 << MX51_ECSPI_DMA_RXTDEN_OFFSET);
> > +
> >
>
> IMO, we should have an seperate function for dmactrl,rx_threshold &
> tx_threshold for better visiblity.
>
>
I understood your concern, but I don't want to create one function only for
setting some bit fields of the register.
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/