[PATCH v2 11/19] powerpc/8xx: Use M_TW instead of M_TWB

[Christophe Leroy]

Use M_TW instead of M_TWB for storing Level 1 table address as M_TWB requires
4k aligned tables, which is only the case with 4k pages.
Consequently, we have to calculate the level 1 table index by ourselves.

Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxx>

---
 arch/powerpc/kernel/head_8xx.S |   48 ++++++++++++++++++---------------
 1 files changed, 26 insertions(+), 22 deletions(-)

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 4a49ff3..ad15070 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -276,8 +276,8 @@ SystemCall:
 	. = 0x1100
 /*
  * For the MPC8xx, this is a software tablewalk to load the instruction
- * TLB.  It is modelled after the example in the Motorola manual.  The task
- * switch loads the M_TWB register with the pointer to the first level table.
+ * TLB.  The task switch loads the M_TW register with the pointer to the first
+ * level table.
  * If we discover there is no second level table (value is zero) or if there
  * is an invalid pte, we load that into the TLB, which causes another fault
  * into the TLB Error interrupt where we can handle such problems.
@@ -299,7 +299,6 @@ InstructionTLBMiss:
 #endif
 	DO_8xx_CPU6(0x3780, r3)
 	mtspr	SPRN_MD_EPN, r10	/* Have to use MD_EPN for walk, MI_EPN can't */
-	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
 
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
@@ -307,14 +306,17 @@ InstructionTLBMiss:
 #ifdef CONFIG_MODULES
 	/* Only modules will cause ITLB Misses as we always
 	 * pin the first 8MB of kernel memory */
-	andi.	r11, r10, 0x0800	/* Address >= 0x80000000 */
+	andis.	r11, r10, 0x8000	/* Address >= 0x80000000 */
+#endif
+	mfspr	r11, SPRN_M_TW	/* Get level 1 table base address */
+#ifdef CONFIG_MODULES
 	beq	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	rlwimi	r10, r11, 0, 2, 19
+	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@h
+	ori	r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
 3:
 #endif
-	lwz	r11, 0(r10)	/* Get the level 1 entry */
+	rlwinm	r10, r10, 12, 20, 29	/* Extract level 1 index */
+	lwzx	r11, r10, r11	/* Get the level 1 entry */
 	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
 	beq	2f		/* If zero, don't try to find a pte */
 
@@ -375,18 +377,19 @@ DataStoreTLBMiss:
 #endif
 	EXCEPTION_PROLOG_0
 	mtspr	SPRN_SPRG_SCRATCH2, r10
-	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
+	mfspr	r10, SPRN_MD_EPN
 
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	andi.	r11, r10, 0x0800
+	andis.	r11, r10, 0x8000
+	mfspr	r11, SPRN_M_TW	/* Get level 1 table base address */
 	beq	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	rlwimi	r10, r11, 0, 2, 19
+	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@h
+	ori	r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
 3:
-	lwz	r11, 0(r10)	/* Get the level 1 entry */
+	rlwinm	r10, r10, 12, 20, 29	/* Extract level 1 index */
+	lwzx	r11, r10, r11	/* Get the level 1 entry */
 	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
 	beq	2f		/* If zero, don't try to find a pte */
 
@@ -523,12 +526,12 @@ FixupDAR:/* Entry point for dcbx workaround. */
 	andis.	r11, r10, 0x8000	/* Address >= 0x80000000 */
 	DO_8xx_CPU6(0x3780, r3)
 	mtspr	SPRN_MD_EPN, r10
-	mfspr	r11, SPRN_M_TWB	/* Get level 1 table entry address */
+	mfspr	r11, SPRN_M_TW	/* Get level 1 table base address */
 	beq-	3f		/* Branch if user space */
 	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@h
 	ori	r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
-	rlwimi	r11, r10, 32-20, 0xffc /* r11 = r11&~0xffc|(r10>>20)&0xffc */
-3:	lwz	r11, 0(r11)	/* Get the level 1 entry */
+3:	rlwinm	r10, r10, 12, 20, 29	/* Extract level 1 index */
+	lwzx	r11, r10, r11	/* Get the level 1 entry */
 	DO_8xx_CPU6(0x3b80, r3)
 	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
 	mfspr	r11, SPRN_MD_TWC	/* ....and get the pte address */
@@ -537,6 +540,7 @@ FixupDAR:/* Entry point for dcbx workaround. */
 	lwz	r3, 8(r0)	/* restore r3 from memory */
 #endif
 	/* concat physical page address(r11) and page offset(r10) */
+	mfspr	r10, SPRN_SRR0
 	rlwimi	r11, r10, 0, 20, 31
 	lwz	r11,0(r11)
 /* Check if it really is a dcbx instruction. */
@@ -692,11 +696,11 @@ start_here:
 #ifdef CONFIG_8xx_CPU6
 	lis	r4, cpu6_errata_word@h
 	ori	r4, r4, cpu6_errata_word@l
-	li	r3, 0x3980
+	li	r3, 0x3f80
 	stw	r3, 12(r4)
 	lwz	r3, 12(r4)
 #endif
-	mtspr	SPRN_M_TWB, r6
+	mtspr	SPRN_M_TW, r6
 	lis	r4,2f@h
 	ori	r4,r4,2f@l
 	tophys(r4,r4)
@@ -870,10 +874,10 @@ _GLOBAL(set_context)
 	lis	r6, cpu6_errata_word@h
 	ori	r6, r6, cpu6_errata_word@l
 	tophys	(r4, r4)
-	li	r7, 0x3980
+	li	r7, 0x3f80
 	stw	r7, 12(r6)
 	lwz	r7, 12(r6)
-        mtspr   SPRN_M_TWB, r4               /* Update MMU base address */
+        mtspr   SPRN_M_TW, r4               /* Update MMU base address */
 	li	r7, 0x3380
 	stw	r7, 12(r6)
 	lwz	r7, 12(r6)
@@ -881,7 +885,7 @@ _GLOBAL(set_context)
 #else
         mtspr   SPRN_M_CASID,r3		/* Update context */
 	tophys	(r4, r4)
-	mtspr	SPRN_M_TWB, r4		/* and pgd */
+	mtspr	SPRN_M_TW, r4		/* and pgd */
 #endif
 	SYNC
 	blr
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/