[PATCH 03/28] staging: comedi: amplc_pci230: remove some unnecessary parentheses
From: Ian Abbott
Date: Mon Sep 01 2014 - 07:10:57 EST
Remove some pairs of parentheses that don't really improve readability.
Also, reduce the amount of leading whitespace in a few places.
Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
drivers/staging/comedi/drivers/amplc_pci230.c | 75 +++++++++++++--------------
1 file changed, 36 insertions(+), 39 deletions(-)
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index 09b392b..0ba06f7 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -650,7 +650,7 @@ static int get_resources(struct comedi_device *dev, unsigned int res_mask,
ok = 1;
claimed = 0;
spin_lock_irqsave(&devpriv->res_spinlock, irqflags);
- for (b = 1, i = 0; (i < NUM_RESOURCES) && res_mask; b <<= 1, i++) {
+ for (b = 1, i = 0; i < NUM_RESOURCES && res_mask; b <<= 1, i++) {
if (res_mask & b) {
res_mask &= ~b;
if (devpriv->res_owner[i] == OWNER_NONE) {
@@ -676,7 +676,7 @@ static int get_resources(struct comedi_device *dev, unsigned int res_mask,
static inline int get_one_resource(struct comedi_device *dev,
unsigned int resource, unsigned char owner)
{
- return get_resources(dev, (1U << resource), owner);
+ return get_resources(dev, 1U << resource, owner);
}
static void put_resources(struct comedi_device *dev, unsigned int res_mask,
@@ -688,7 +688,7 @@ static void put_resources(struct comedi_device *dev, unsigned int res_mask,
unsigned long irqflags;
spin_lock_irqsave(&devpriv->res_spinlock, irqflags);
- for (b = 1, i = 0; (i < NUM_RESOURCES) && res_mask; b <<= 1, i++) {
+ for (b = 1, i = 0; i < NUM_RESOURCES && res_mask; b <<= 1, i++) {
if (res_mask & b) {
res_mask &= ~b;
if (devpriv->res_owner[i] == owner)
@@ -701,7 +701,7 @@ static void put_resources(struct comedi_device *dev, unsigned int res_mask,
static inline void put_one_resource(struct comedi_device *dev,
unsigned int resource, unsigned char owner)
{
- put_resources(dev, (1U << resource), owner);
+ put_resources(dev, 1U << resource, owner);
}
static inline void put_all_resources(struct comedi_device *dev,
@@ -743,7 +743,7 @@ static unsigned int pci230_choose_clk_count(uint64_t ns, unsigned int *count,
for (clk_src = CLK_10MHZ;; clk_src++) {
cnt = divide_ns(ns, pci230_timebase[clk_src], flags);
- if ((cnt <= 65536) || (clk_src == CLK_1KHZ))
+ if (cnt <= 65536 || clk_src == CLK_1KHZ)
break;
}
*count = cnt;
@@ -973,7 +973,7 @@ static int pci230_ao_cmdtest(struct comedi_device *dev,
err |= cfc_check_trigger_src(&cmd->start_src, TRIG_INT);
tmp = TRIG_TIMER | TRIG_INT;
- if ((thisboard->min_hwver > 0) && (devpriv->hwver >= 2)) {
+ if (thisboard->min_hwver > 0 && devpriv->hwver >= 2) {
/*
* For PCI230+ hardware version 2 onwards, allow external
* trigger from EXTTRIG/EXTCONVCLK input (PCI230+ pin 25).
@@ -1041,11 +1041,11 @@ static int pci230_ao_cmdtest(struct comedi_device *dev,
* The only flags allowed are CR_EDGE and CR_INVERT.
* The CR_EDGE flag is ignored.
*/
- if (cmd->scan_begin_arg &
- (CR_FLAGS_MASK & ~(CR_EDGE | CR_INVERT))) {
- cmd->scan_begin_arg = COMBINE(cmd->scan_begin_arg, 0,
- CR_FLAGS_MASK &
- ~(CR_EDGE | CR_INVERT));
+ if (cmd->scan_begin_arg & CR_FLAGS_MASK &
+ ~(CR_EDGE | CR_INVERT)) {
+ cmd->scan_begin_arg =
+ COMBINE(cmd->scan_begin_arg, 0,
+ CR_FLAGS_MASK & ~(CR_EDGE | CR_INVERT));
err |= -EINVAL;
}
break;
@@ -1215,8 +1215,8 @@ static int pci230_handle_ao_fifo(struct comedi_device *dev,
* (otherwise there will be loads of "DAC FIFO not half full"
* interrupts).
*/
- if ((num_scans == 0) &&
- ((dacstat & PCI230P2_DAC_FIFO_HALF) == 0)) {
+ if (num_scans == 0 &&
+ (dacstat & PCI230P2_DAC_FIFO_HALF) == 0) {
dev_err(dev->class_dev, "AO buffer underrun\n");
events |= COMEDI_CB_OVERFLOW | COMEDI_CB_ERROR;
}
@@ -1515,8 +1515,8 @@ static int pci230_ai_check_scan_period(struct comedi_cmd *cmd)
chanlist_len = 1;
min_scan_period = chanlist_len * cmd->convert_arg;
- if ((min_scan_period < chanlist_len) ||
- (min_scan_period < cmd->convert_arg)) {
+ if (min_scan_period < chanlist_len ||
+ min_scan_period < cmd->convert_arg) {
/* Arithmetic overflow. */
min_scan_period = UINT_MAX;
err++;
@@ -1645,7 +1645,7 @@ static int pci230_ai_cmdtest(struct comedi_device *dev,
err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW | TRIG_INT);
tmp = TRIG_FOLLOW | TRIG_TIMER | TRIG_INT;
- if ((thisboard->have_dio) || (thisboard->min_hwver > 0)) {
+ if (thisboard->have_dio || thisboard->min_hwver > 0) {
/*
* Unfortunately, we cannot trigger a scan off an external
* source on the PCI260 board, since it uses the PPIC0 (DIO)
@@ -1676,8 +1676,8 @@ static int pci230_ai_cmdtest(struct comedi_device *dev,
* If scan_begin_src is not TRIG_FOLLOW, then a monostable will be
* set up to generate a fixed number of timed conversion pulses.
*/
- if ((cmd->scan_begin_src != TRIG_FOLLOW) &&
- (cmd->convert_src != TRIG_TIMER))
+ if (cmd->scan_begin_src != TRIG_FOLLOW &&
+ cmd->convert_src != TRIG_TIMER)
err |= -EINVAL;
if (err)
@@ -1704,7 +1704,7 @@ static int pci230_ai_cmdtest(struct comedi_device *dev,
* PCI230 or PCI260. Max speed depends whether
* single-ended or pseudo-differential.
*/
- if (cmd->chanlist && (cmd->chanlist_len > 0)) {
+ if (cmd->chanlist && cmd->chanlist_len > 0) {
/* Peek analogue reference of first channel. */
if (CR_AREF(cmd->chanlist[0]) == AREF_DIFF)
max_speed_ai = MAX_SPEED_AI_DIFF;
@@ -1744,13 +1744,12 @@ static int pci230_ai_cmdtest(struct comedi_device *dev,
* The only flags allowed are CR_INVERT and CR_EDGE.
* CR_EDGE is required.
*/
- if ((cmd->convert_arg &
- (CR_FLAGS_MASK & ~CR_INVERT)) != CR_EDGE) {
+ if ((cmd->convert_arg & CR_FLAGS_MASK & ~CR_INVERT) !=
+ CR_EDGE) {
/* Set CR_EDGE, preserve CR_INVERT. */
- cmd->convert_arg = COMBINE(cmd->start_arg,
- (CR_EDGE | 0),
- CR_FLAGS_MASK &
- ~CR_INVERT);
+ cmd->convert_arg =
+ COMBINE(cmd->start_arg, CR_EDGE | 0,
+ CR_FLAGS_MASK & ~CR_INVERT);
err |= -EINVAL;
}
} else {
@@ -1854,14 +1853,14 @@ static void pci230_ai_update_fifo_trigger_level(struct comedi_device *dev,
scanlen >= PCI230_ADC_FIFOLEVEL_HALFFULL) {
wake = PCI230_ADC_FIFOLEVEL_HALFFULL;
} else {
- wake = (devpriv->ai_scan_count * scanlen) -
+ wake = devpriv->ai_scan_count * scanlen -
devpriv->ai_scan_pos;
}
}
if (wake >= PCI230_ADC_FIFOLEVEL_HALFFULL) {
triglev = PCI230_ADC_INT_FIFO_HALF;
} else {
- if ((wake > 1) && (devpriv->hwver > 0)) {
+ if (wake > 1 && devpriv->hwver > 0) {
/* PCI230+/260+ programmable FIFO interrupt level. */
if (devpriv->adcfifothresh != wake) {
devpriv->adcfifothresh = wake;
@@ -1908,8 +1907,8 @@ static int pci230_ai_inttrig_convert(struct comedi_device *dev,
* bit has a different meaning when FIFO enabled (and when
* FIFO not enabled, it only works for software triggers).
*/
- if (((devpriv->adccon & PCI230_ADC_IM_MASK) ==
- PCI230_ADC_IM_DIF) && (devpriv->hwver == 0)) {
+ if ((devpriv->adccon & PCI230_ADC_IM_MASK) ==
+ PCI230_ADC_IM_DIF && devpriv->hwver == 0) {
/* PCI230/260 in differential mode */
delayus = 8;
} else {
@@ -2183,12 +2182,11 @@ static void pci230_handle_ai(struct comedi_device *dev,
todo = PCI230_ADC_FIFOLEVEL_HALFFULL;
} else if (devpriv->ai_scan_count == 0) {
todo = 0;
- } else if ((devpriv->ai_scan_count > PCI230_ADC_FIFOLEVEL_HALFFULL) ||
- (scanlen > PCI230_ADC_FIFOLEVEL_HALFFULL)) {
+ } else if (devpriv->ai_scan_count > PCI230_ADC_FIFOLEVEL_HALFFULL ||
+ scanlen > PCI230_ADC_FIFOLEVEL_HALFFULL) {
todo = PCI230_ADC_FIFOLEVEL_HALFFULL;
} else {
- todo = (devpriv->ai_scan_count * scanlen) -
- devpriv->ai_scan_pos;
+ todo = devpriv->ai_scan_count * scanlen - devpriv->ai_scan_pos;
if (todo > PCI230_ADC_FIFOLEVEL_HALFFULL)
todo = PCI230_ADC_FIFOLEVEL_HALFFULL;
}
@@ -2281,13 +2279,13 @@ static int pci230_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
* Need Z2-CT2 to supply a conversion trigger source at a high
* logic level, even if not doing timed conversions.
*/
- res_mask |= (1U << RES_Z2CT2);
+ res_mask |= 1U << RES_Z2CT2;
if (cmd->scan_begin_src != TRIG_FOLLOW) {
/* Using Z2-CT0 monostable to gate Z2-CT2 conversion timer */
- res_mask |= (1U << RES_Z2CT0);
+ res_mask |= 1U << RES_Z2CT0;
if (cmd->scan_begin_src == TRIG_TIMER) {
/* Using Z2-CT1 for scan frequency */
- res_mask |= (1U << RES_Z2CT1);
+ res_mask |= 1U << RES_Z2CT1;
}
}
/* Claim resources. */
@@ -2360,7 +2358,7 @@ static int pci230_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
adcen |= 1 << gainshift;
}
} else {
- gainshift = (chan & ~1);
+ gainshift = chan & ~1;
adcen |= 1 << chan;
}
devpriv->adcg = (devpriv->adcg & ~(3 << gainshift)) |
@@ -2676,8 +2674,7 @@ static int pci230_attach_common(struct comedi_device *dev,
*/
extfunc |= PCI230P_EXTFUNC_GAT_EXTTRIG;
}
- if ((thisboard->ao_chans > 0) &&
- (devpriv->hwver >= 2)) {
+ if (thisboard->ao_chans > 0 && devpriv->hwver >= 2) {
/* Enable DAC FIFO functionality. */
extfunc |= PCI230P2_EXTFUNC_DACFIFO;
}
--
2.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/