Re: [PATCH] rtc: ds1307: add trickle charger device tree binding

[Mark Rutland]

On Mon, Sep 08, 2014 at 02:52:42PM +0100, Pavel Machek wrote:
> Hi!
> 
> > I would suggest we have two properties that describe the resistor's
> > rating and whether or not there is a diode:
> > 
> > trickle-resistor-ohms = <250>
> > diode-connected;
> > 
> > That's easy for a human to write and/or validate, we can easily extend
> > it in future, requires no proliferation of macros, and describes the
> > hardware rather than telling software what to do.
> > 
> > The driver becomes a little more complicated, but gains sanity checking,
> > which is a good thing.
> 
> Certainly looks better than register bit defines.
> 
> As rtc-bq32k has similar options, I'm interested, too. I believe we
> should add
> 
> trickle-charge-enable;
> 
> (we may not want to charge at all), and I believe the diode should be
> 
> disconnect-diode;
> 
> ... With diode connected, charge is slower, and that probably should
> be the default value. We don't want to give too much current in
> default case.  (bq32k has hard-coded resistor value for
> diode/not-diode case).

I agree that if one case is less likely to be problematic / damaging
that should be the default.

Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/