Re: [PATCH V1] ASoC: fsl_ssi: refine ipg clock usage in this module

From: Markus Pargmann
Date: Wed Sep 10 2014 - 02:21:41 EST


On Tue, Sep 09, 2014 at 11:38:05AM -0700, Nicolin Chen wrote:
> On Tue, Sep 09, 2014 at 05:18:07PM +0800, Shengjiu Wang wrote:
> > @@ -1321,7 +1333,11 @@ static int fsl_ssi_probe(struct platform_device *pdev)
> > return -ENOMEM;
> > }
> >
> > - ssi_private->regs = devm_regmap_init_mmio(&pdev->dev, iomem,
> > + if (ssi_private->soc->imx)
> > + ssi_private->regs = devm_regmap_init_mmio_clk(&pdev->dev,
> > + "ipg", iomem, &fsl_ssi_regconfig);
> > + else
> > + ssi_private->regs = devm_regmap_init_mmio(&pdev->dev, iomem,
>
> As Markus mentioned, the key point here is to be compatible with those
> non-clock-name platforms.
>
> I think it would be safer to keep the current code while adding an extra
> clk_disable_unprepare() at the end of probe() as a common routine. And
> meantime, make sure to have the call for imx only because it seems that
> the other platforms do not depend on the clock. //a bit guessing here :)
>
> Then we can get a patch like:
> open() {
> + clk_prepare_enable();
> ....
> }
>
> close() {
> ....
> + clk_disable_unprepare()
> }
>
> probe() {
> clk_get();
> clk_prepare_enable();
> ....
> if (xxx)
> - goto err_xx;
> + return ret;
> ....
> + clk_disable_unprepare();
> return 0;
> -err_xx:
> - clk_disable_unprepare()
> }
>
> remove() {
> ....
> - clk_disable_unprepare()
> }

If I remember correctly, there may be AC97 communication with the codec
before any substream is created. That's why we enable the SSI unit right
at the beginning for AC97 in fsl_ssi_setup_reg_vals(). So we need to
check for AC97 before disabling clocks.

Best regards,

Markus

--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

Attachment: signature.asc
Description: Digital signature