Re: [PATCH v3 2/3] mmc: mmci: Add sdio enable mask in variant data

From: Ulf Hansson
Date: Wed Sep 10 2014 - 03:47:40 EST


On 22 August 2014 06:54, Srinivas Kandagatla
<srinivas.kandagatla@xxxxxxxxxx> wrote:
> This patch adds sdio enable mask in variant data, SOCs like ST have
> special bits in datactrl register to enable sdio. Unconditionally setting
> this bit in this driver breaks other SOCs like Qualcomm which maps this
> bits to something else, so making this enable bit to come from variant
> data solves the issue.
>
> Originally the issue is detected while testing WLAN ath6kl on Qualcomm
> APQ8064.
>
> Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>

Thanks! Applied for next!

Kind regards
Uffe

> ---
> drivers/mmc/host/mmci.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
> index 533ad2b..a25759e 100644
> --- a/drivers/mmc/host/mmci.c
> +++ b/drivers/mmc/host/mmci.c
> @@ -67,6 +67,7 @@ static unsigned int fmax = 515633;
> * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register
> * @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl
> * register
> + * @datactrl_mask_sdio: SDIO enable mask in datactrl register
> * @pwrreg_powerup: power up value for MMCIPOWER register
> * @f_max: maximum clk frequency supported by the controller.
> * @signal_direction: input/out direction of bus signals can be indicated
> @@ -89,6 +90,7 @@ struct variant_data {
> unsigned int fifohalfsize;
> unsigned int data_cmd_enable;
> unsigned int datactrl_mask_ddrmode;
> + unsigned int datactrl_mask_sdio;
> bool sdio;
> bool st_clkdiv;
> bool blksz_datactrl16;
> @@ -138,6 +140,7 @@ static struct variant_data variant_u300 = {
> .clkreg_enable = MCI_ST_U300_HWFCEN,
> .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
> .datalength_bits = 16,
> + .datactrl_mask_sdio = MCI_ST_DPSM_SDIOEN,
> .sdio = true,
> .pwrreg_powerup = MCI_PWR_ON,
> .f_max = 100000000,
> @@ -151,6 +154,7 @@ static struct variant_data variant_nomadik = {
> .fifohalfsize = 8 * 4,
> .clkreg = MCI_CLK_ENABLE,
> .datalength_bits = 24,
> + .datactrl_mask_sdio = MCI_ST_DPSM_SDIOEN,
> .sdio = true,
> .st_clkdiv = true,
> .pwrreg_powerup = MCI_PWR_ON,
> @@ -168,6 +172,7 @@ static struct variant_data variant_ux500 = {
> .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
> .clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE,
> .datalength_bits = 24,
> + .datactrl_mask_sdio = MCI_ST_DPSM_SDIOEN,
> .sdio = true,
> .st_clkdiv = true,
> .pwrreg_powerup = MCI_PWR_ON,
> @@ -187,6 +192,7 @@ static struct variant_data variant_ux500v2 = {
> .clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE,
> .datactrl_mask_ddrmode = MCI_ST_DPSM_DDRMODE,
> .datalength_bits = 24,
> + .datactrl_mask_sdio = MCI_ST_DPSM_SDIOEN,
> .sdio = true,
> .st_clkdiv = true,
> .blksz_datactrl16 = true,
> @@ -812,16 +818,10 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
> if (data->flags & MMC_DATA_READ)
> datactrl |= MCI_DPSM_DIRECTION;
>
> - /* The ST Micro variants has a special bit to enable SDIO */
> if (variant->sdio && host->mmc->card)
> if (mmc_card_sdio(host->mmc->card)) {
> - /*
> - * The ST Micro variants has a special bit
> - * to enable SDIO.
> - */
> u32 clk;
> -
> - datactrl |= MCI_ST_DPSM_SDIOEN;
> + datactrl |= variant->datactrl_mask_sdio;
>
> /*
> * The ST Micro variant for SDIO small write transfers
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/