[PATCH v4 2/3] ARM: dts: Add Peach Pi dts entry for Atmel touchpad

[Javier Martinez Canillas]

The Peach Pi board has an Atmel maXTouch trackpad device.
Add the needed Device Tree nodes to support it.

This Device Tree change is based on the Chrome OS 3.8 tree
but adapted to use the mainline Atmel maXTouch DT binding.

Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
---

Changes since v3: None, new patch.

 arch/arm/boot/dts/exynos5800-peach-pi.dts | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 88b3544..025a095 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -505,6 +505,27 @@
 	};
 };
 
+&hsi2c_8 {
+	status = "okay";
+	clock-frequency = <333000>;
+	/* Atmel mXT540S */
+	trackpad@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		interrupt-parent = <&gpx1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_irq>;
+		linux,gpio-keymap = <KEY_RESERVED
+				     KEY_RESERVED
+				     KEY_RESERVED	/* GPIO 0 */
+				     KEY_RESERVED	/* GPIO 1 */
+				     BTN_LEFT		/* GPIO 2 */
+				     KEY_RESERVED>;	/* GPIO 3 */
+	};
+};
+
 &hsi2c_9 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -589,6 +610,13 @@
 		samsung,pin-drv = <0>;
 	};
 
+	trackpad_irq: trackpad-irq {
+		samsung,pins = "gpx1-1";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-2";
 		samsung,pin-function = <0>;
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/