Re: [BUG] Bisected Problem with LSI PCI FC Adapter

[Dirk Gouders]

Yinghai Lu <yinghai@xxxxxxxxxx> writes:

> On Thu, Sep 11, 2014 at 10:30 AM, Bjorn Helgaas <bhelgaas@xxxxxxxxxx> wrote:
>> [+cc linux-pci]
>>
>>
>> On Thu, Sep 11, 2014 at 7:43 AM, Dirk Gouders <dirk@xxxxxxxxxxx> wrote:
>>> Andreas Noever <andreas.noever@xxxxxxxxx> writes:
>>>
>>>> On Wed, Sep 3, 2014 at 2:47 PM, Dirk Gouders <dirk@xxxxxxxxxxx> wrote:
>>>>> Andreas Noever <andreas.noever@xxxxxxxxx> writes:
>>>>>
>>>>>> On Wed, Sep 3, 2014 at 12:57 PM, Dirk Gouders <dirk@xxxxxxxxxxx> wrote:
>>>>>>> On a Tyan VX50 (B4985) I ran into problems when updating the kernel: the
>>>>>>> PCI FC Adapter is no longer recognized.
>>>>>>
>>>>>> Can you provide the output of lspci -vvv and the output of dmesg from
>>>>>> a working boot? Which card is the one that is not recognized?
>>>>>
>>>>> Sure, the card that disappeared is:
>>>>>
>>>>> 0a:00.0 Fibre Channel: LSI Logic / Symbios Logic FC949ES Fibre Channel Adapter (rev 02)
>>>>
>>>> As far as I can tell the following is happening:
>>>> The root bus resource window (advertised by the bios?) is to small:
>>>> pci_bus 0000:00: root bus resource [bus 00-07]
>>>> Previously we didn't really care. There is a resource conflict but we
>>>> ignored it:
>>>> pci_bus 0000:0a: busn_res: can not insert [bus 0a] under [bus 00-07]
>>>> (conflicts with (null) [bus 00-07])
>>>> With the patch we mark the bridge as broken and reassign the bus to 06:
>>>> pci 0000:00:0e.0: bridge configuration invalid ([bus 0a-0a]), reconfiguring
>>>> pci 0000:00:0e.0: PCI bridge to [bus 06-07]
>>>> pci 0000:00:0e.0:   bridge window [io  0x3000-0x3fff]
>>>> pci 0000:00:0e.0:   bridge window [mem 0xd4200000-0xd42fffff]
>>>> pci_bus 0000:06: busn_res: [bus 06-07] end is updated to 06
>
>> Thanks for following up on this.  It had fallen off my radar, so I
>> opened https://bugzilla.kernel.org/show_bug.cgi?id=84281 to make sure
>> I don't forget again.  Please continue the debug discussion here in
>> email.
>
> Two problems here:
> 1. This is amd two node systems. amd_bus.c tell us bus [00, 7f] is from
> first socket, but _OSC says only [0,7] is from first socket.
>
> So solution (1):
> According to Linus's principle, we should always trust HW than firmware,
> so should we just adjust bus range from _OSC before we use it?
>
> 2. After moving, LSI FC card from bus 0a to bus 07, the LSI refuse to respond.
>
> During my testing with pci busn allocation patchset, I found that if changing
> LSI Erie card to different bus, it will refuse to responding. Only
> thing that will
> make the LSI card again, is resetting the pcie link. This should be LSI firmware
> bug.
>
> Dirk, please check if you can apply attached patches to use
>
> echo 1 > /sys/bus/pci/devices/0000\:00\0e.0/link_disable
> echo 0 > /sys/bus/pci/devices/0000\:00\0e.0/link_disable
>
> to reset the link.

Thanks, Yinghai, I will apply them tomorrow and report.

What I was currently trying was to construct a test-environment so that
I do not need to do tests and diagnosis on a busy machine.

I noticed that this problem seems to start with the narrow Root
Bridge window (00-07) but every other machine that I had a look at,
starts with (00-ff), so those will not trigger my problem.

I thought I could perhaps try to shrink the window in
acpi_pci_root_add() to trigger the problem and that kind of works: it
triggers it but not exactly the same way, because it basically ends at
this code in pci_scan_bridge():

	if (max >= bus->busn_res.end) {
		dev_warn(&dev->dev, "can't allocate child bus %02x from %pR (pass %d)\n",
			 max, &bus->busn_res, pass);
		goto out;
	}

If this could work but I am just missing a small detail, I would be
glad to hear about it and do the first tests this way.  If it is
complete nonsense, I will just use the machine that triggers the problem
for the tests.

Dirk


> Solution (2)
> To workaround the problem, we could reset the pcie link after change bus num
> in the pcie bridges ?
>
> Soultion (3)
> Or we just revert the offending 1820ffdccb9b4398 (PCI: Make sure
> bus number resources stay within their parents bounds) ?
>
> Thanks
>
> Yinghai
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/