Re: [PATCH v2 4/5] toshiba_acpi: Support new keyboard backlight type

[Darren Hart]

On Wed, Sep 10, 2014 at 09:01:56PM -0600, Azael Avalos wrote:

Hi Azael,

> Newer Toshiba models now come with a new (and different) keyboard
> backlight implementation with three modes of operation: TIMER,
> ON and OFF, and the LED is controlled internally by the firmware.
> 
> This patch adds support for that type of backlight, changing the
> existing code to accomodate the new implementation.
> 
> The timeout value range is now 1-60 seconds, and the accepted
> modes are now: 1 (FN-Z), 2 (AUTO or TIMER), 8(ON) and 10 (OFF),
> this adds two new entries keyboard_type and available_kbd_modes,
> the first shows the keyboard type and the latter shows the
> supported modes depending on the type.
> 
> Signed-off-by: Azael Avalos <coproscefalo@xxxxxxxxx>
> ---
>  drivers/platform/x86/toshiba_acpi.c | 117 +++++++++++++++++++++++++++++++-----
>  1 file changed, 102 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
> index 4c8fa7b..08147c5 100644
> --- a/drivers/platform/x86/toshiba_acpi.c
> +++ b/drivers/platform/x86/toshiba_acpi.c
> @@ -140,6 +140,10 @@ MODULE_LICENSE("GPL");
>  #define HCI_WIRELESS_BT_POWER		0x80
>  #define SCI_KBD_MODE_FNZ		0x1
>  #define SCI_KBD_MODE_AUTO		0x2
> +#define SCI_KBD_MODE_ON			0x8
> +#define SCI_KBD_MODE_OFF		0x10
> +#define SCI_KBD_MODE_MAX		SCI_KBD_MODE_OFF
> +#define SCI_KBD_TIME_MAX		0x3c001a
>  
>  struct toshiba_acpi_dev {
>  	struct acpi_device *acpi_dev;
> @@ -155,6 +159,7 @@ struct toshiba_acpi_dev {
>  	int force_fan;
>  	int last_key_event;
>  	int key_event_valid;
> +	int kbd_type;
>  	int kbd_mode;
>  	int kbd_time;
>  
> @@ -495,6 +500,42 @@ static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev)
>  }
>  
>  /* KBD Illumination */
> +static int toshiba_kbd_illum_available(struct toshiba_acpi_dev *dev)
> +{
> +	u32 in[HCI_WORDS] = { SCI_GET, SCI_KBD_ILLUM_STATUS, 0, 0, 0, 0 };
> +	u32 out[HCI_WORDS];
> +	acpi_status status;
> +
> +	if (!sci_open(dev))
> +		return 0;
> +
> +	status = hci_raw(dev, in, out);
> +	sci_close(dev);
> +	if (ACPI_FAILURE(status) || out[0] == SCI_INPUT_DATA_ERROR) {
> +		pr_err("ACPI call to query kbd illumination support failed\n");
> +		return 0;
> +	} else if (out[0] == HCI_NOT_SUPPORTED) {
> +		pr_info("Keyboard illumination not available\n");
> +		return 0;
> +	}
> +
> +	/* Check for keyboard backlight timeout max value,
> +	/* previous kbd backlight implementation set this to

Extra / ^

> +	 * 0x3c0003, and now the new implementation set this
> +	 * to 0x3c001a, use this to distinguish between them
> +	 */
> +	if (out[3] == SCI_KBD_TIME_MAX)
> +		dev->kbd_type = 2;
> +	else
> +		dev->kbd_type = 1;
> +	/* Get the current keyboard backlight mode */
> +	dev->kbd_mode = out[2] & SCI_KBD_MODE_MASK;
> +	/* Get the current time (1-60 seconds) */
> +	dev->kbd_time = out[2] >> HCI_MISC_SHIFT;
> +
> +	return 1;
> +}
> +
>  static int toshiba_kbd_illum_status_set(struct toshiba_acpi_dev *dev, u32 time)
>  {
>  	u32 result;
> @@ -1268,20 +1309,46 @@ static ssize_t toshiba_kbd_bl_mode_store(struct device *dev,
>  	ret = kstrtoint(buf, 0, &mode);
>  	if (ret)
>  		return ret;
> -	if (mode != SCI_KBD_MODE_FNZ && mode != SCI_KBD_MODE_AUTO)
> +	if (mode != SCI_KBD_MODE_FNZ && mode != SCI_KBD_MODE_AUTO &&
> +	    mode != SCI_KBD_MODE_ON && mode != SCI_KBD_MODE_OFF)
>  		return -EINVAL;

Since you have to check for a type::mode match anyway, this initial test is
redundant. I suggest inverting the type::mode match below and make it
exhaustive, something like:

>  
> +	/* Check for supported modes depending on keyboard backlight type */
> +	if (toshiba->kbd_type == 1) {
> +		/* Type 1 supports SCI_KBD_MODE_FNZ and SCI_KBD_MODE_AUTO */
> +		if (mode == SCI_KBD_MODE_ON || mode == SCI_KBD_MODE_OFF)


		if (mode != SCI_KBD_MODE_FNZ && mode != SCI_KBD_MODE_AUTO)


The net number of tests is ultimately smaller and it's fewer lines of code.

> +			return -EINVAL;
> +	} else if (toshiba->kbd_type == 2) {
> +		/* Type 2 doesn't support SCI_KBD_MODE_FNZ */
> +		if (mode == SCI_KBD_MODE_FNZ)
> +			return -EINVAL;
> +	}
> +
>  	/* Set the Keyboard Backlight Mode where:
> -	 * Mode - Auto (2) | FN-Z (1)
>  	 *	Auto - KBD backlight turns off automatically in given time
>  	 *	FN-Z - KBD backlight "toggles" when hotkey pressed
> +	 *	ON   - KBD backlight is always on
> +	 *	OFF  - KBD backlight is always off
>  	 */
> +
> +	/* Only make a change if the actual mode has changed */
>  	if (toshiba->kbd_mode != mode) {
> +		/* Shift the time to "base time" (0x3c0000 == 60 seconds) */
>  		time = toshiba->kbd_time << HCI_MISC_SHIFT;
> -		time = time + toshiba->kbd_mode;
> +
> +		/* OR the "base time" to the actual method format */
> +		if (toshiba->kbd_type == 1) {
> +			/* Type 1 requires the current mode */
> +			time |= toshiba->kbd_mode;
> +		} else if (toshiba->kbd_type == 2) {
> +			/* Type 2 requires the desired mode */
> +			time |= mode;
> +		}
> +
>  		ret = toshiba_kbd_illum_status_set(toshiba, time);
>  		if (ret)
>  			return ret;
> +
>  		toshiba->kbd_mode = mode;
>  	}
>  
> @@ -1293,12 +1360,31 @@ static ssize_t toshiba_kbd_bl_mode_show(struct device *dev,
>  					char *buf)
>  {
>  	struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
> -	u32 time;
>  
> -	if (toshiba_kbd_illum_status_get(toshiba, &time) < 0)
> -		return -EIO;
> +	return sprintf(buf, "%x\n", toshiba->kbd_mode);


I understand this isn't new, and I don't see an obvious path to failure - have
you verified dev_get_drvdata CANNOT return NULL or a bad pointer ever?



> +}
>  
> -	return sprintf(buf, "%i\n", time & 0x07);
> +static ssize_t toshiba_kbd_type_show(struct device *dev,
> +				     struct device_attribute *attr,
> +				     char *buf)
> +{
> +	struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
> +
> +	return sprintf(buf, "%d\n", toshiba->kbd_type);
> +}
> +
> +static ssize_t toshiba_available_kbd_modes_show(struct device *dev,
> +						struct device_attribute *attr,
> +						char *buf)
> +{
> +	struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
> +
> +	if (toshiba->kbd_type == 1)
> +		return sprintf(buf, "%x %x\n",
> +			       SCI_KBD_MODE_FNZ, SCI_KBD_MODE_AUTO);
> +
> +	return sprintf(buf, "%x %x %x\n",
> +		       SCI_KBD_MODE_AUTO, SCI_KBD_MODE_ON, SCI_KBD_MODE_OFF);
>  }
>  
>  static ssize_t toshiba_kbd_bl_timeout_store(struct device *dev,
> @@ -1390,6 +1476,9 @@ static ssize_t toshiba_position_show(struct device *dev,
>  
>  static DEVICE_ATTR(kbd_backlight_mode, S_IRUGO | S_IWUSR,
>  		   toshiba_kbd_bl_mode_show, toshiba_kbd_bl_mode_store);
> +static DEVICE_ATTR(keyboard_type, S_IRUGO, toshiba_kbd_type_show, NULL);
> +static DEVICE_ATTR(available_kbd_modes, S_IRUGO,
> +		   toshiba_available_kbd_modes_show, NULL);


Please keep the naming as consistent as possible. We're using "kbd" here instead
of "keyboard" here for most everything else.

A user may not key-in that kbd_backlight_mode is the setting and the options are
available_kbd_modes, since kbd_backlight_mode could conceivably be different
from kbd_modes. Let's make it very easy for someone trying to discover this
interface by using consistent terminology throughout.


>  static DEVICE_ATTR(kbd_backlight_timeout, S_IRUGO | S_IWUSR,
>  		   toshiba_kbd_bl_timeout_show, toshiba_kbd_bl_timeout_store);
>  static DEVICE_ATTR(touchpad, S_IRUGO | S_IWUSR,
> @@ -1398,6 +1487,8 @@ static DEVICE_ATTR(position, S_IRUGO, toshiba_position_show, NULL);
>  
>  static struct attribute *toshiba_attributes[] = {
>  	&dev_attr_kbd_backlight_mode.attr,
> +	&dev_attr_keyboard_type.attr,
> +	&dev_attr_available_kbd_modes.attr,
>  	&dev_attr_kbd_backlight_timeout.attr,
>  	&dev_attr_touchpad.attr,
>  	&dev_attr_position.attr,
> @@ -1414,7 +1505,7 @@ static umode_t toshiba_sysfs_is_visible(struct kobject *kobj,
>  	if (attr == &dev_attr_kbd_backlight_mode.attr)
>  		exists = (drv->kbd_illum_supported) ? true : false;
>  	else if (attr == &dev_attr_kbd_backlight_timeout.attr)
> -		exists = (drv->kbd_mode == SCI_KBD_MODE_AUTO) ? true : false;
> +		exists = (drv->kbd_mode == SCI_KBD_MODE_FNZ) ? false : true;

Is this correct? This would mean a timeout is available even if mode is OFF?


>  	else if (attr == &dev_attr_touchpad.attr)
>  		exists = (drv->touchpad_supported) ? true : false;
>  	else if (attr == &dev_attr_position.attr)
> @@ -1759,15 +1850,11 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
>  			dev->eco_supported = 1;
>  	}
>  
> -	ret = toshiba_kbd_illum_status_get(dev, &dummy);
> -	if (!ret) {
> -		dev->kbd_time = dummy >> HCI_MISC_SHIFT;
> -		dev->kbd_mode = dummy & 0x07;
> -	}
> -	dev->kbd_illum_supported = !ret;
> +	dev->kbd_illum_supported = toshiba_kbd_illum_available(dev);
>  	/*
>  	 * Only register the LED if KBD illumination is supported
> -	 * and the keyboard backlight operation mode is set to FN-Z
> +	 * and the keyboard backlight operation mode is set to FN-Z,
> +	 * keyboard backlight type 2 returns 0x8400 (HCI WRITE PROTECTED)

Hrm, I'm not following how this relates to the code block that follows...

Thanks Azael,

-- 
Darren Hart
Intel Open Source Technology Center
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/