Re: [BUG] Bisected Problem with LSI PCI FC Adapter

[Yinghai Lu]

On Fri, Sep 12, 2014 at 5:11 PM, Dirk Gouders <dirk@xxxxxxxxxxx> wrote:
> Yinghai Lu <yinghai@xxxxxxxxxx> writes:
>
> Yes, I skip them in pci_scan_device() to get the unused bus number space
> that 0a.0 and 0b.0 then can use when reconfiguration is triggered.

That is not right. Can not let two bridges use same bus num.

>
>> Proper simulation could be:
>> 1. remove 07:00.0
>>     echo 1 > /sys/bus/pci/devices/0000:07:00.0/remove
>> 2. change bus range in 00:0a.0 bus
>>     setpci -s 00:0a.0 0x1c.l=0x00101000
>> 3. remove 00:0a.0
>>     echo 1 > /sys/bus/pci/devices/0000:00:0a.0/remove
>> 4. rescan pci
>>     echo 1 > /sys/bus/pci/rescan
>> 5. reset pcie link from 00:0a.0
>>     setpci -s 00:0a.0 0xc0.b=0x18
>>     sleep 1s
>>     setpci -s 00:0a.0 0xc0.b=0x08
>> 6. rescan pci bus
>>     echo 1 > /sys/bus/pci/rescan
>
> OK, I did that (with 3.16) but the reconfiguration code doesn't
> get triggered.  Here is what dmesg and lspci -tv say:

2 should be
   setpci -s 00:0a.0 0x18.l=0x00101000
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/