Re: [PATCH] i2c-designware: Intel BayTrail PMIC I2C bus support

[David E. Box]

Hi Maxime,

On Mon, Sep 15, 2014 at 08:57:38AM +0200, Maxime Coquelin wrote:

> >+		err = dev->acquire_ownership(dev->dev);
> Have you considered using hwspinlocks instead?

No, I've not used it before but it looks applicable here. I'll take a look.

> >@@ -212,6 +259,25 @@ static int dw_i2c_probe(struct platform_device *pdev)
> >  	adap->dev.parent = &pdev->dev;
> >  	adap->dev.of_node = pdev->dev.of_node;
> >
> >+#if IS_ENABLED(CONFIG_I2C_SHARED_CONTROLLER)
> >+	if (dev->shared_host)
> >+		adap->algo = &i2c_sc_algo;
> >+
> >+	r = i2c_add_numbered_adapter(adap);
> >+	if (r) {
> >+		dev_err(&pdev->dev, "failure adding adapter\n");
> >+		return r;
> >+	}
> >+
> >+	if (dev->shared_host)
> >+		pm_runtime_forbid(&pdev->dev);
> >+	else {
> >+		pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
> >+		pm_runtime_use_autosuspend(&pdev->dev);
> >+		pm_runtime_set_active(&pdev->dev);
> >+		pm_runtime_enable(&pdev->dev);
> >+	}
> >+#else
> Why do you put all this under config flags?

So that this additional code only compiles for this very specific
implementation.

> >@@ -268,7 +334,11 @@ static int dw_i2c_resume(struct device *dev)
> >  	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
> >
> >  	clk_prepare_enable(i_dev->clk);
> >-	i2c_dw_init(i_dev);
> >+
> >+#if IS_ENABLED(CONFIG_I2C_SHARED_CONTROLLER)
> >+	if (!i_dev->shared_host)
> >+#endif
> Putting this under config flag should not be needed.
> 
> And even not under config flags, why don't you re-initialize your
> device in case of resume?

Because the device is already being managed by hardware, not the OS.

David Box
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/