[PATCH/RFC v2 11/12] ARM: shmobile: r8a7740 dtsi: Add PM QoS device latencies

From: Geert Uytterhoeven
Date: Tue Sep 16 2014 - 14:50:55 EST

Next message: tim . gardner: "[PATCH 3.17-rc5] kconfig: Suppress warning: âjumpâ may be used uninitialized"
Previous message: Geert Uytterhoeven: "[PATCH/RFC v2 04/12] PM / Domains: Add genpd attach/detach callbacks"
In reply to: Ulf Hansson: "Re: [PATCH/RFC v2 04/12] PM / Domains: Add genpd attach/detach callbacks"
Next in thread: Geert Uytterhoeven: "[PATCH/RFC v2 02/12] PM / Domains: Add DT bindings for PM QoS device latencies"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

For now use 250 Âs, just like the legacy platform code does.

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
v2:
- New
---
arch/arm/boot/dts/r8a7740.dtsi | 136 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 136 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index ed0adeb61a1ad8ec..713170442b7bd4b2 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -26,6 +26,10 @@
reg = <0x0>;
clock-frequency = <800000000>;
power-domains = <&pd_a3sm>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
};
};

@@ -49,6 +53,10 @@
clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
clock-names = "fck";
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;

renesas,channels-mask = <0x3f>;

@@ -75,6 +83,10 @@
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
};

/* irqpin1: IRQ8 - IRQ15 */
@@ -97,6 +109,10 @@
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
};

/* irqpin2: IRQ16 - IRQ23 */
@@ -119,6 +135,10 @@
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
};

/* irqpin3: IRQ24 - IRQ31 */
@@ -141,6 +161,10 @@
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
};

ether: ethernet@e9a00000 {
@@ -150,6 +174,10 @@
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
power-domains = <&pd_a4s>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
phy-mode = "mii";
#address-cells = <1>;
#size-cells = <0>;
@@ -167,6 +195,10 @@
0 204 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
power-domains = <&pd_a4r>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};

@@ -181,6 +213,10 @@
0 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};

@@ -191,6 +227,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};

@@ -201,6 +241,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};

@@ -211,6 +255,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};

@@ -221,6 +269,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};

@@ -231,6 +283,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};

@@ -241,6 +297,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};

@@ -251,6 +311,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};

@@ -261,6 +325,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};

@@ -271,6 +339,10 @@
clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};

@@ -290,6 +362,10 @@
<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
};

tpu: pwm@e6600000 {
@@ -297,6 +373,10 @@
reg = <0xe6600000 0x100>;
clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
#pwm-cells = <3>;
};
@@ -308,6 +388,10 @@
0 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_MMC>;
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};

@@ -319,6 +403,10 @@
0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -332,6 +420,10 @@
0 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -345,6 +437,10 @@
0 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
power-domains = <&pd_a3sp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -357,6 +453,10 @@
interrupts = <0 9 0x4>;
clocks = <&mstp3_clks R8A7740_CLK_FSI>;
power-domains = <&pd_a4mp>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
status = "disabled";
};

@@ -409,6 +509,10 @@
reg = <0xe6150000 0x10000>;
clocks = <&extal1_clk>, <&extalr_clk>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <1>;
clock-output-names = "system", "pllc0", "pllc1",
"pllc2", "r",
@@ -424,6 +528,10 @@
reg = <0xe6150080 4>;
clocks = <&pllc1_div2_clk>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <0>;
clock-output-names = "sub";
};
@@ -433,6 +541,10 @@
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7740_CLK_PLLC1>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <0>;
clock-div = <2>;
clock-mult = <1>;
@@ -442,6 +554,10 @@
compatible = "fixed-factor-clock";
clocks = <&extal1_clk>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <0>;
clock-div = <2>;
clock-mult = <1>;
@@ -454,6 +570,10 @@
reg = <0xe6150080 4>;
clocks = <&sub_clk>, <&sub_clk>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7740_CLK_SUBCK R8A7740_CLK_SUBCK2
@@ -470,6 +590,10 @@
<&sub_clk>, <&sub_clk>,
<&cpg_clocks R8A7740_CLK_B>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7740_CLK_CEU21 R8A7740_CLK_CEU20 R8A7740_CLK_TMU0
@@ -492,6 +616,10 @@
<&sub_clk>, <&sub_clk>, <&sub_clk>,
<&sub_clk>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7740_CLK_SCIFA6 R8A7740_CLK_INTCA
@@ -522,6 +650,10 @@
<&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7740_CLK_CMT1 R8A7740_CLK_FSI R8A7740_CLK_IIC1
@@ -540,6 +672,10 @@
<&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>;
power-domains = <&pd_c5>;
+ stop-latency = <250000>;
+ start-latency = <250000>;
+ save-state-latency = <250000>;
+ restore-state-latency = <250000>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7740_CLK_USBH R8A7740_CLK_SDHI2
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: tim . gardner: "[PATCH 3.17-rc5] kconfig: Suppress warning: âjumpâ may be used uninitialized"
Previous message: Geert Uytterhoeven: "[PATCH/RFC v2 04/12] PM / Domains: Add genpd attach/detach callbacks"
In reply to: Ulf Hansson: "Re: [PATCH/RFC v2 04/12] PM / Domains: Add genpd attach/detach callbacks"
Next in thread: Geert Uytterhoeven: "[PATCH/RFC v2 02/12] PM / Domains: Add DT bindings for PM QoS device latencies"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]