[PATCH V2 15/24] irqchip: mips-gic: Implement irq_set_type callback

From: Andrew Bresticker
Date: Thu Sep 18 2014 - 17:50:45 EST


Implement an irq_set_type callback for the GIC which is used to set
the polarity and trigger type of GIC interrupts.

Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
Acked-by: Jason Cooper <jason@xxxxxxxxxxxxxx>
Reviewed-by: Qais Yousef <qais.yousef@xxxxxxxxxx>
Tested-by: Qais Yousef <qais.yousef@xxxxxxxxxx>
---
Changes from v1:
- hold spinlock across gic_set_type because of r-m-w ops
---
arch/mips/include/asm/gic.h | 9 +++++++
drivers/irqchip/irq-mips-gic.c | 57 ++++++++++++++++++++++++++++++++++++++++--
2 files changed, 64 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index 1bf7985..662b567 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -23,6 +23,8 @@
#define GIC_POL_NEG 0
#define GIC_TRIG_EDGE 1
#define GIC_TRIG_LEVEL 0
+#define GIC_TRIG_DUAL_ENABLE 1
+#define GIC_TRIG_DUAL_DISABLE 0

#define MSK(n) ((1 << (n)) - 1)
#define REG32(addr) (*(volatile unsigned int *) (addr))
@@ -179,6 +181,13 @@
GIC_INTR_OFS(intr)), (1 << GIC_INTR_BIT(intr)), \
(trig) << GIC_INTR_BIT(intr))

+/* Dual edge triggering : Reset Value is always 0 */
+#define GIC_SH_SET_DUAL_OFS 0x0200
+#define GIC_SET_DUAL(intr, dual) \
+ GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_DUAL_OFS + \
+ GIC_INTR_OFS(intr)), (1 << GIC_INTR_BIT(intr)), \
+ (dual) << GIC_INTR_BIT(intr))
+
/* Mask manipulation */
#define GIC_SH_SMASK_OFS 0x0380
#define GIC_SET_INTR_MASK(intr) \
diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
index b0daee5..e9abb08 100644
--- a/drivers/irqchip/irq-mips-gic.c
+++ b/drivers/irqchip/irq-mips-gic.c
@@ -43,6 +43,7 @@ struct gic_intrmask_regs {
static struct gic_pcpu_mask pcpu_masks[NR_CPUS];
static struct gic_pending_regs pending_regs[NR_CPUS];
static struct gic_intrmask_regs intrmask_regs[NR_CPUS];
+static DEFINE_SPINLOCK(gic_lock);

#if defined(CONFIG_CSRC_GIC) || defined(CONFIG_CEVT_GIC)
cycle_t gic_read_count(void)
@@ -244,9 +245,60 @@ static void gic_ack_irq(struct irq_data *d)
GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), d->irq - gic_irq_base);
}

-#ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(gic_lock);
+static int gic_set_type(struct irq_data *d, unsigned int type)
+{
+ unsigned int irq = d->irq - gic_irq_base;
+ unsigned long flags;
+ bool is_edge;
+
+ spin_lock_irqsave(&gic_lock, flags);
+ switch (type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_FALLING:
+ GIC_SET_POLARITY(irq, GIC_POL_NEG);
+ GIC_SET_TRIGGER(irq, GIC_TRIG_EDGE);
+ GIC_SET_DUAL(irq, GIC_TRIG_DUAL_DISABLE);
+ is_edge = true;
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ GIC_SET_POLARITY(irq, GIC_POL_POS);
+ GIC_SET_TRIGGER(irq, GIC_TRIG_EDGE);
+ GIC_SET_DUAL(irq, GIC_TRIG_DUAL_DISABLE);
+ is_edge = true;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ /* polarity is irrelevant in this case */
+ GIC_SET_TRIGGER(irq, GIC_TRIG_EDGE);
+ GIC_SET_DUAL(irq, GIC_TRIG_DUAL_ENABLE);
+ is_edge = true;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ GIC_SET_POLARITY(irq, GIC_POL_NEG);
+ GIC_SET_TRIGGER(irq, GIC_TRIG_LEVEL);
+ GIC_SET_DUAL(irq, GIC_TRIG_DUAL_DISABLE);
+ is_edge = false;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ default:
+ GIC_SET_POLARITY(irq, GIC_POL_POS);
+ GIC_SET_TRIGGER(irq, GIC_TRIG_LEVEL);
+ GIC_SET_DUAL(irq, GIC_TRIG_DUAL_DISABLE);
+ is_edge = false;
+ break;
+ }

+ if (is_edge) {
+ gic_irq_flags[irq] |= GIC_TRIG_EDGE;
+ __irq_set_handler_locked(d->irq, handle_edge_irq);
+ } else {
+ gic_irq_flags[irq] &= ~GIC_TRIG_EDGE;
+ __irq_set_handler_locked(d->irq, handle_level_irq);
+ }
+ spin_unlock_irqrestore(&gic_lock, flags);
+
+ return 0;
+}
+
+#ifdef CONFIG_SMP
static int gic_set_affinity(struct irq_data *d, const struct cpumask *cpumask,
bool force)
{
@@ -282,6 +334,7 @@ static struct irq_chip gic_irq_controller = {
.irq_ack = gic_ack_irq,
.irq_mask = gic_mask_irq,
.irq_unmask = gic_unmask_irq,
+ .irq_set_type = gic_set_type,
#ifdef CONFIG_SMP
.irq_set_affinity = gic_set_affinity,
#endif
--
2.1.0.rc2.206.gedb03e5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/