Re: [PATCH v4 3/9] Documentation: bindings: net: add the Marvell PXA168 Ethernet controller

From: Arnd Bergmann
Date: Tue Sep 23 2014 - 12:30:25 EST


On Tuesday 23 September 2014 17:45:52 Sebastian Hesselbarth wrote:
> For reference, this is what we have for MVEBU SoCs with multiple ports
> per controller:
>
> eth: ethernet-ctrl@72000 {
> compatible = "marvell,orion-eth";
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x72000 0x4000>;
> clocks = <&gate_clk 2>;
> marvell,tx-checksum-limit = <1600>;
> status = "disabled";
>
> ethernet-port@0 {
> compatible = "marvell,orion-eth-port";
> reg = <0>;
> interrupts = <29>;
> /* overwrite MAC address in bootloader */
> local-mac-address = [00 00 00 00 00 00];
> phy-handle = <&ethphy>;
> };
> };
>
> mdio: mdio-bus@72004 {
> compatible = "marvell,orion-mdio";
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x72004 0x84>;
> interrupts = <30>;
> clocks = <&gate_clk 2>;
> status = "disabled";
> ethphy: ethernet-phy {
> /* set phy address in board file */
> };
> };
>

But in this example, you have the same registers and the same
clocks in two nodes, which are even used by the same device driver
at the moment. It's not a big issue, but my feeling is that Antoine's
approach was actually better because it more closely reflects
the way that the hardware is built.

Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/