Re: [PATCH v5 2/4] i2c: add support for Diolan DLN-2 USB-I2C adapter

[Johan Hovold]

On Fri, Sep 19, 2014 at 11:22:43PM +0300, Octavian Purdila wrote:

> +struct dln2_i2c {
> +	struct platform_device *pdev;
> +	struct i2c_adapter adapter;
> +	u32 freq;
> +	u32 min_freq;
> +	u32 max_freq;
> +	/*
> +	 * Buffer to hold the packet for read or write transfers. One
> +	 * is enough since we can't have multiple transfers in
> +	 * parallel on the i2c adapter.
> +	 */
> +	union {
> +		struct {
> +			u8 port;
> +			u8 addr;
> +			u8 mem_addr_len;
> +			__le32 mem_addr;
> +			__le16 buf_len;
> +			u8 buf[DLN2_I2C_MAX_XFER_SIZE];
> +		} __packed tx;
> +		struct {
> +			__le16 buf_len;
> +			u8 buf[DLN2_I2C_MAX_XFER_SIZE];
> +		} __packed rx;
> +	} *buf;

Please declare these structs separately from the dln2_i2c struct so you
can use temporary pointers below.

Perhaps just allocate a large enough buffer (or page) here and keep you
transfer-buffer declarations in the two functions where they are used if
you prefer.

> +};
>
> +static int dln2_i2c_enable(struct dln2_i2c *dln2, bool enable)
> +{
> +	struct dln2_platform_data *pdata = dev_get_platdata(&dln2->pdev->dev);
> +	int ret;
> +	u8 port;
> +	u16 cmd;
> +
> +	port = pdata->port;

Store the port number in the dln2_i2c struct rather than access it
through the platform data for every I/O operation.

> +
> +	if (enable)
> +		cmd = DLN2_I2C_ENABLE;
> +	else
> +		cmd = DLN2_I2C_DISABLE;
> +
> +	ret = dln2_transfer(dln2->pdev, cmd, &port, sizeof(port), NULL, NULL);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int dln2_i2c_set_frequency(struct dln2_i2c *dln2, u32 freq)
> +{
> +	int ret;
> +	struct tx_data {
> +		u8 port;
> +		__le32 freq;
> +	} __packed tx;
> +	struct dln2_platform_data *pdata = dev_get_platdata(&dln2->pdev->dev);
> +
> +	tx.port = pdata->port;
> +	tx.freq = cpu_to_le32(freq);
> +
> +	ret = dln2_transfer(dln2->pdev, DLN2_I2C_SET_FREQUENCY, &tx, sizeof(tx),
> +			    NULL, NULL);
> +	if (ret < 0)
> +		return ret;
> +
> +	dln2->freq = freq;
> +
> +	return 0;
> +}
> +
> +static int dln2_i2c_get_freq(struct dln2_i2c *dln2, u16 cmd, u32 *res)
> +{
> +	int ret;
> +	struct dln2_platform_data *pdata = dev_get_platdata(&dln2->pdev->dev);
> +	u8 port = pdata->port;
> +	__le32 freq;
> +	unsigned len = sizeof(freq);
> +
> +	ret = dln2_transfer(dln2->pdev, cmd, &port, sizeof(port),
> +			    &freq, &len);
> +	if (ret < 0)
> +		return ret;
> +	if (len < sizeof(freq))
> +		return -EPROTO;
> +
> +	*res = le32_to_cpu(freq);
> +
> +	return 0;
> +}
> +
> +static int dln2_i2c_setup(struct dln2_i2c *dln2)
> +{
> +	int ret;
> +
> +	ret = dln2_i2c_enable(dln2, false);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = dln2_i2c_get_freq(dln2, DLN2_I2C_GET_MIN_FREQUENCY,
> +				&dln2->min_freq);
> +	if (ret < 0)
> +		return 0;

return ret

> +
> +	ret = dln2_i2c_get_freq(dln2, DLN2_I2C_GET_MAX_FREQUENCY,
> +				&dln2->max_freq);
> +	if (ret < 0)
> +		return 0;

return ret

> +
> +	ret = dln2_i2c_set_frequency(dln2, DLN2_I2C_FREQ_STD);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = dln2_i2c_enable(dln2, true);
> +
> +	return ret;
> +}
> +
> +static int dln2_i2c_write(struct dln2_i2c *dln2, u8 addr,
> +			  u8 *data, u16 data_len)
> +{
> +	struct dln2_platform_data *pdata = dev_get_platdata(&dln2->pdev->dev);
> +	int ret;
> +	unsigned len;
> +
> +	dln2->buf->tx.port = pdata->port;
> +	dln2->buf->tx.addr = addr;
> +	dln2->buf->tx.mem_addr_len = 0;
> +	dln2->buf->tx.mem_addr = 0;
> +	dln2->buf->tx.buf_len = cpu_to_le16(data_len);
> +	memcpy(dln2->buf->tx.buf, data, data_len);
> +
> +	len = sizeof(dln2->buf->tx) + data_len - DLN2_I2C_MAX_XFER_SIZE;
> +	ret = dln2_transfer(dln2->pdev, DLN2_I2C_WRITE, &dln2->buf->tx, len,
> +			    NULL, NULL);

Use a temporary pointer to the tx struct above for readability.

> +	if (ret < 0)
> +		return ret;
> +
> +	return data_len;
> +}
> +
> +static int dln2_i2c_read(struct dln2_i2c *dln2, u16 addr, u8 *data,
> +			 u16 data_len)
> +{
> +	struct dln2_platform_data *pdata = dev_get_platdata(&dln2->pdev->dev);
> +	int ret;
> +	struct {
> +		u8 port;
> +		u8 addr;
> +		u8 mem_addr_len;
> +		__le32 mem_addr;
> +		__le16 buf_len;
> +	} __packed tx;
> +	unsigned rx_len;
> +
> +	tx.port = pdata->port;
> +	tx.addr = addr;
> +	tx.mem_addr_len = 0;
> +	tx.mem_addr = 0;
> +	tx.buf_len = cpu_to_le16(data_len);
> +
> +	rx_len = sizeof(dln2->buf->rx);
> +
> +	ret = dln2_transfer(dln2->pdev, DLN2_I2C_READ, &tx, sizeof(tx),
> +			    &dln2->buf->rx, &rx_len);
> +	if (ret < 0)
> +		return ret;
> +	if (rx_len < sizeof(dln2->buf->rx.buf_len) + data_len)
> +		return -EPROTO;
> +	if (le16_to_cpu(dln2->buf->rx.buf_len) != data_len)
> +		return -EPROTO;
> +
> +	memcpy(data, dln2->buf->rx.buf, data_len);'

Use a temporary pointer to the rx struct above.

> +
> +	return data_len;
> +}

[...]

> +static DEVICE_ATTR_RW(dln2_i2c_freq);

Any new sysfs attribute must to be documented under Documentation/ABI.

[...]

> +static struct platform_driver dln2_i2c_driver = {
> +	.driver.name	= "dln2-i2c",
> +	.driver.owner	= THIS_MODULE,

No need to set the owner field when using the module_platform_driver
macro.

> +	.probe		= dln2_i2c_probe,
> +	.remove		= dln2_i2c_remove,
> +};
> +
> +module_platform_driver(dln2_i2c_driver);
> +
> +MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@xxxxxxxxx>");
> +MODULE_DESCRIPTION("Driver for the Diolan DLN2 I2C master interface");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:dln2-i2c");

Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/