[PATCH v5 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs

[Marek Szyprowski]

This is an updated patchset, which intends to add support for L2 cache
on Exynos4 SoCs on boards running under secure firmware, which requires
certain initialization steps to be done with help of firmware, as
selected registers are writable only from secure mode.

First four patches extend existing support for secure write in L2C driver
to account for design of secure firmware running on Exynos. Namely:
 1) direct read access to certain registers is needed on Exynos, because
    secure firmware calls set several registers at once,
 2) not all boards are running secure firmware, so .write_sec callback
    needs to be installed in Exynos firmware ops initialization code,
 3) write access to {DATA,TAG}_LATENCY_CTRL registers fron non-secure world
    is not allowed and so must use l2c_write_sec as well,
 4) on certain boards, default value of prefetch register is incorrect
    and must be overridden at L2C initialization.
For boards running with firmware that provides access to individual
L2C registers this series should introduce no functional changes. However
since the driver is widely used on other platforms I'd like to kindly ask
any interested people for testing.

Further three patches add implementation of .write_sec and .configure
callbacks for Exynos secure firmware and necessary DT nodes to enable
L2 cache.

Changes in this version tested on Exynos4412-based TRATS2 and OdroidU3+
boards (both with secure firmware). There should be no functional change
for Exynos boards running without secure firmware. I do not have access
to affected non-Exynos boards, so I could not test on them.


Depends on:
 - [PATCH v3 0/5] Firmware-assisted suspend/resume of Exynos SoCs
   (https://lkml.org/lkml/2014/8/26/445)


Changelog:

Changes since v4:
(https://lkml.org/lkml/2014/8/26/461)
 - rewrote the code accessing l2x0_saved_regs from assembly code
 - added comment and reworked unconditional call to SMC_CMD_L2X0INVALL

Changes since v3:
(https://lkml.org/lkml/2014/7/17/600)
 - fixed issues with references to initdata on resume path by creating
   a copy of affected structure (pointed out by Russell King),
 - fixed unnecessary full reconfiguration of L2C controller on resume
   (configuration is already determined after initialization, so the
    only thing to do is to push those values to the controller),
 - rebased on next-20140717 tag of linux-next tree and last versions
   of dependencies.

Changes since v2:
(https://lkml.org/lkml/2014/6/25/416)
 - refactored L2C driver to use commit-like interface and make it no longer
   depend on availability of writes to individual registers,
 - moved L2C resume to assembly code, because doing it later makes some
   systems unstable - this is also needed for deeper cpuidle modes,
 - dropped unnecessary patch hacking around the .write_sec interface,
 - dropped patch making the driver use l2c_write_sec() for LATENCY_CTRL
   registers as Exynos is no longer affected and I'm not aware of any
   reports that this is also needed on other platforms (can be applied
   separately if it turns out to be so),
 - rebased onto next-20140717 tag of linux-next tree.

Changes since v1:
(https://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg106323.html)
 - rebased onto for-next branch of linux-samsung tree,
 - changed argument order of outer_cache.write_sec() callback to match
   l2c_write_sec() function in cache-l2x0.c,
 - added support of overriding of prefetch settings to work around incorrect
   default settings on certain Exynos4x12-based boards,
 - added call to firmware to invalidate whole L2 cache before setting enable
   bit in L2C control register (required by Exynos secure firmware).


Patch summary:

Tomasz Figa (7):
  ARM: l2c: Refactor the driver to use commit-like interface
  ARM: l2c: Add interface to ask hypervisor to configure L2C
  ARM: l2c: Get outer cache .write_sec callback from mach_desc only if
    not NULL
  ARM: l2c: Add support for overriding prefetch settings
  ARM: EXYNOS: Add .write_sec outer cache callback for L2C-310
  ARM: EXYNOS: Add support for non-secure L2X0 resume
  ARM: dts: exynos4: Add nodes for L2 cache controller

 Documentation/devicetree/bindings/arm/l2cc.txt |  10 +
 arch/arm/boot/dts/exynos4210.dtsi              |   9 +
 arch/arm/boot/dts/exynos4x12.dtsi              |  14 ++
 arch/arm/include/asm/outercache.h              |   3 +
 arch/arm/kernel/irq.c                          |   3 +-
 arch/arm/mach-exynos/firmware.c                |  50 +++++
 arch/arm/mach-exynos/sleep.S                   |  46 +++++
 arch/arm/mm/cache-l2x0.c                       | 255 ++++++++++++++++---------
 8 files changed, 294 insertions(+), 96 deletions(-)

-- 
1.9.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/