Re: [5/5] ARM: tegra: jetson-tk1: enable GK20A GPU

From: Stephen Warren
Date: Thu Sep 25 2014 - 11:47:42 EST


On 09/25/2014 07:27 AM, Sjoerd Simons wrote:
Playing a bit with todays linux-next on my jetson, it seems this patch is
still required for enabling the GPU. Is there anything blocking it (firmware
not available yet in liux-firmware?)

I think initially I was waiting for the DRM patch "drm/nouvea: support for probing platform devices" to be applied, but it looks like that's been applied already, so only patches 4 and 5 in this series are still outstanding.

Alex, wasn't there also some issue where the VPR register had to be programmed, and if it wasn't there'd be a hang when the GPU registers were touched? If we've added code to Nouveau/tegradrm to detect that and avoid the problem, then I guess we can commit these last two patches for 3.19. A resend after the 3.18 merge window might help.

On Mon, May 19, 2014 at 06:24:10PM +0900, Alexandre Courbot wrote:
Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index e31fb61a81d3..15a194d1277f 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -30,6 +30,12 @@
};
};

+ gpu@0,57000000 {
+ status = "okay";
+
+ vdd-supply = <&vdd_gpu>;
+ };
+
pinmux: pinmux@0,70000868 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -1505,7 +1511,7 @@
regulator-always-on;
};

- sd6 {
+ vdd_gpu: sd6 {
regulator-name = "+VDD_GPU_AP";
regulator-min-microvolt = <650000>;
regulator-max-microvolt = <1200000>;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/