Re: [PATCH v6 0/2] Initial support for XPowers AXP288 PMIC

[Jacob Pan]

Hi Lee/Jonathan,

Can you consider taking this for 3.18 if there are no other issues?

Thanks,

Jacob


On Thu, 25 Sep 2014 04:15:39 -0700
Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx> wrote:

> X-Powers AXP288 is a customized PMIC found on some Intel Baytrail-CR
> platforms. It comes with sub-functions such as USB charging, fuel
> gauge, ADC, and many LDO and BUCK channels.
> 
> By extending the existing AXP20x driver, this patchset adds basic
> support for AXP288 PMIC with ADC as one MFD cell device driver.
> 
> Currently, the PMIC driver in this patchset does not support platform
> data enumeration. But when ACPI _DSD and unified device properties
> become available, cell devices with platform data will be added.
> 
> This patch does not use intel_soc_pmic core for i2c and regmap
> handling in that axp288 shares similar programming interface with
> other X-Power PMICs supported in axp20x.c. Therefore, extending
> axp20x.c to include axp288 makes more sense.
> 
> Changes
>  v6:	- change axp20x_match_device() flow to give more specific
> error messages.
> 	- remove unnecessary cast
> 
>  v5:	- excluded iio documentation patch, already applied to
> iio.git
>  	- restructured axp288_adc read_raw code to make it more
> readable
> 	- renamed adc_enable to adc_set_state and add comment about
> why adc has to be always on and there is no disable function.
> 	- axp20x use const as needed for regmap structures
> 
>  v4:	- removed rename patch, use Kconfig description to list
> supported devices
>  	- misc clean up in ADC code, use regmap_bulk_read and
> improve error handling, etc.
> 	- remove IIO ADC scale, treat raw data as processed since the
> unit is already in IIO expected milliamps.
> 
>  v3:	- put all file rename changes in 1/5
>  	- add iio documentation for in_current_raw/scale
> 	- removed global variables in axp2xx
> 	- removed pm callbacks from GPADC
> 	- removed ACPI opregion cell device
> 	- added scales to ADC current and voltage
> 	- removed ADC thermal sensor from sysfs, kernel internal use
> only
> 
>  v2:
> 	- use format -M for 1/4
> 	- minor tweak based on Maxime's review
> 
> 
> Jacob Pan (2):
>   mfd/axp20x: extend axp20x to support axp288 pmic
>   iio/adc: add support for axp288 adc
> 
>  drivers/iio/adc/Kconfig      |   8 +
>  drivers/iio/adc/Makefile     |   1 +
>  drivers/iio/adc/axp288_adc.c | 253 ++++++++++++++++++++++++++++++
>  drivers/mfd/Kconfig          |   3 +-
>  drivers/mfd/axp20x.c         | 361
> ++++++++++++++++++++++++++++++++++++-------
> include/linux/mfd/axp20x.h   |  59 +++++++ 6 files changed, 629
> insertions(+), 56 deletions(-) create mode 100644
> drivers/iio/adc/axp288_adc.c
> 

[Jacob Pan]
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/