[GIT PULL] : clockevents/clocksource for 3.18
From: Daniel Lezcano
Date: Sun Sep 28 2014 - 20:18:53 EST
Hi Thomas, Ingo,
sorry for sending my PR so late but I have been very busy.
This PR contains the following changes:
* Simon Horman provided the DT soc bindings for the sh_cmt, sh_mtu2
and sh_tmu
* Carlo Caione implemented the driver for the Meson6 with its
documentation
* Gael Portay fixed to unprepare the clock when the irq request fails
and he took the opportunity to replace 'setup_irq' by 'request_irq' for
the 'tcb_clrsrc' driver
* Hao Liu disabled the timer before setting it again for the 'sirf' driver
* Michal Simek changed the 'cadence_ttc' timer to make configurable
the counter width (16 and 32), defaulting to 16 which is the current setting
* Nathan Lynch provided a set of cleanup for the architected arm timer
in preparation of the vdso support
* Stefan Agner disabled the 'vf_pit_timer' when the system is entering
in suspend in order to prevent the system to be woken up by the timer
* Sudeep Holla added a check to make sure the mem and the cp15 timers
are available if they are defined in the DT
Thanks !
-- Daniel
The following changes since commit 88299c9bdb109e0d95abdca648065631ff91b2cb:
timerfd: Remove an always true check (2014-08-27 11:17:48 +0200)
are available in the git repository at:
http://git.linaro.org/people/daniel.lezcano/linux.git clockevents/3.18
for you to fetch changes up to 867f667fb9c6734e06cc24e96fc7f06a7e772084:
Merge tag 'renesas-clocksource-for-v3.18' of
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into
clockevents/3.18 (2014-09-29 01:59:51 +0200)
----------------------------------------------------------------
Carlo Caione (2):
ARM: meson: documentation: Add timer documentation
ARM: meson6: clocksource: Add Meson6 timer support
Daniel Lezcano (1):
Merge tag 'renesas-clocksource-for-v3.18' of
git://git.kernel.org/.../horms/renesas into clockevents/3.18
Gael Portay (1):
clocksource: tcb_clksrc: Sanitize IRQ request
Hao Liu (1):
clocksource: sirf: Disable counter before re-setting it
Michal Simek (1):
clocksource: cadence_ttc: Add support for 32bit mode
Nathan Lynch (3):
clocksource: arm_arch_timer: Change clocksource name if CP15
unavailable
clocksource: arm_arch_timer: Enable counter access for 32-bit ARM
clocksource: arm_arch_timer: Consolidate arch_timer_evtstrm_enable
Simon Horman (3):
clocksource: sh_cmt: Document SoC specific bindings
clocksource: sh_mtu2: Document r7s72100 binding
clocksource: sh_tmu: Document r8a7779 binding
Stefan Agner (1):
clocksource: vf_pit_timer: Support shutdown mode
Sudeep Holla (1):
clocksource: arm_arch_timer: Discard unavailable timers correctly
.../bindings/timer/amlogic,meson6-timer.txt | 15 ++
.../devicetree/bindings/timer/renesas,cmt.txt | 44 +++++-
.../devicetree/bindings/timer/renesas,mtu2.txt | 7 +-
.../devicetree/bindings/timer/renesas,tmu.txt | 7 +-
arch/arm/include/asm/arch_timer.h | 25 ---
arch/arm64/include/asm/arch_timer.h | 31 ----
drivers/clocksource/Kconfig | 3 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/arm_arch_timer.c | 64 +++++++-
drivers/clocksource/cadence_ttc_timer.c | 15 +-
drivers/clocksource/meson6_timer.c | 167
+++++++++++++++++++++
drivers/clocksource/tcb_clksrc.c | 13 +-
drivers/clocksource/timer-marco.c | 5 +-
drivers/clocksource/vf_pit_timer.c | 4 +
14 files changed, 314 insertions(+), 87 deletions(-)
create mode 100644
Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
create mode 100644 drivers/clocksource/meson6_timer.c
--
<http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/