[PATCH v3 4/4] ARM: dts: apq8064: Add SATA controller support.
From: Srinivas Kandagatla
Date: Wed Oct 01 2014 - 05:07:15 EST
This patch adds AHCI based SATA controller support to APQ8064.
Tested on IFC6410 board.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 15 +++++++++++++
arch/arm/boot/dts/qcom-apq8064.dtsi | 35 ++++++++++++++++++++++++++++++
2 files changed, 50 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 3e2c777..6856c9d 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -47,6 +47,12 @@
qcom,switch-mode-frequency = <4800000>;
};
+ pm8921_s4: pm8921-s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
pm8921_l3: pm8921-l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
@@ -63,6 +69,15 @@
};
};
+ sata_phy0: sata-phy@1b400000{
+ status = "okay";
+ };
+
+ sata0: sata@29000000 {
+ status = "okay";
+ target-supply = <&pm8921_s4>;
+ };
+
/* OTG */
usb1_phy: phy@12500000 {
status = "okay";
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index c251c72..e65aff0 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -566,6 +566,41 @@
usb-phy = <&usb4_phy>;
};
+ sata_phy0: sata-phy@1b400000{
+ compatible = "qcom,apq8064-sata-phy";
+ status = "disabled";
+ reg = <0x1b400000 0x200>;
+ reg-names = "phy_mem";
+ clocks = <&gcc SATA_PHY_CFG_CLK>;
+ clock-names = "cfg";
+ #phy-cells = <0>;
+ };
+
+ sata0: sata@29000000 {
+ compatible = "generic-ahci";
+ status = "disabled";
+ reg = <0x29000000 0x180>;
+ interrupts = <0 209 0>;
+
+ clocks = <&gcc SFAB_SATA_S_H_CLK>,
+ <&gcc SATA_H_CLK>,
+ <&gcc SATA_A_CLK>,
+ <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ clock-names = "slave_iface",
+ "iface",
+ "bus",
+ "rxoob",
+ "core_pmalive";
+
+ assigned-clocks = <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ assigned-clock-rates = <100000000>, <100000000>;
+
+ phys = <&sata_phy0>;
+ phy-names = "sata-phy";
+ };
+
/* Temporary fixed regulator */
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/