Re: [PATCH 1/1 v3] driver:mtd:spi-nor: Add Micron quad I/O support

[Marek Vasut]

On Wednesday, October 01, 2014 at 04:24:41 PM, Bean Huo éææ (beanhuo) wrote:
> >> For Micron spi norflash,enables or disables quad I/O protocol ,which
> >> controled by EVCR(Enhanced Volatile Configuration Register) Quad I/O
> >> protocol bit 7.When EVCR bit 7 is reset to 0, the spi norflash will
> >> operate in quad I/O following the next WRITE ENHANCED VOLATILE
> >> CONFIGURATION command.
> >
> >You only do one WRITE ENHANCED VOLATILE CONFIGURATION command in the
> >patch, so this text doesn't add up.
> >
> >Try something like this:
> >-->8--
> >This patch adds code which enables Quad I/O mode on Micron SPI NOR
> >flashes.
> >
> >For Micron SPI NOR flash, enabling or disabling quad I/O protocol is
> >controled by EVCR (Enhanced Volatile Configuration Register), Quad I/O
> >protocol bit 7. When EVCR bit 7 is reset to 0, the SPI NOR flash will
> >operate in quad I/O mode. --8<--
> >
> >What do you think ?
> 
> Perfect,I will modify my commit message and sumbit it again.thanks.

Thank you. I didn't mean to grind you unnecessarily or be outright bitch, sorry 
if it did sound like so.

Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/