[PATCH v5 1/4] pinctrl: Device tree bindings for Qualcomm PMIC GPIO block
From: Ivan T. Ivanov
Date: Wed Oct 01 2014 - 12:31:11 EST
From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
This introduced the device tree bindings for the GPIO block found
in PMIC's from Qualcomm.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
---
.../devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 215 +++++++++++++++++++++
include/dt-bindings/pinctrl/qcom,pmic-gpio.h | 142 ++++++++++++++
2 files changed, 357 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
create mode 100644 include/dt-bindings/pinctrl/qcom,pmic-gpio.h
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
new file mode 100644
index 0000000..7ed0804
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -0,0 +1,215 @@
+Qualcomm PMIC GPIO block
+
+This binding describes the GPIO block(s) found in the 8xxx series of
+PMIC's from Qualcomm.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,pm8018-gpio"
+ "qcom,pm8038-gpio"
+ "qcom,pm8058-gpio"
+ "qcom,pm8917-gpio"
+ "qcom,pm8921-gpio"
+ "qcom,pm8941-gpio"
+ "qcom,pma8084-gpio"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Register base of the GPIO block and length.
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Must contain an array of encoded interrupt specifiers for
+ each available GPIO
+
+- gpio-controller:
+ Usage: required
+ Value type: <none>
+ Definition: Mark the device node as a GPIO controller
+
+- #gpio-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: Must be 2;
+ the first cell will be used to define gpio number and the
+ second denotes the flags for this gpio
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin or a list of pins. This configuration can include the
+mux function to select on those pin(s), and various pin configuration
+parameters, as listed below.
+
+
+SUBNODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+ Usage: required
+ Value type: <string-array>
+ Definition: List of gpio pins affected by the properties specified in
+ this subnode. Valid pins are:
+ gpio1-gpio6 for pm8018
+ gpio1-gpio12 for pm8038
+ gpio1-gpio40 for pm8058
+ gpio1-gpio38 for pm8917
+ gpio1-gpio44 for pm8921
+ gpio1-gpio36 for pm8941
+ gpio1-gpio22 for pma8084
+
+- function:
+ Usage: required
+ Value type: <string>
+ Definition: Specify the alternative function to be configured for the
+ specified pins. Valid values are:
+ "normal",
+ "paired",
+ "func1",
+ "func2",
+ "dtest1",
+ "dtest2",
+ "dtest3",
+ "dtest4"
+
+- bias-disable:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configured as no pull.
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configured as pull down.
+
+- bias-pull-up:
+ Usage: optional
+ Value type: <empty>
+ Definition: The specified pins should be configured as pull up.
+
+- qcom,pull-up-strength:
+ Usage: optional
+ Value type: <u32>
+ Definition: Specifies the strength to use for pull up, if selected.
+ Valid values are; as defined in
+ <dt-bindings/pinctrl/qcom,pmic-gpio.h>:
+ 1: 30uA (PMIC_GPIO_PULL_UP_30)
+ 2: 1.5uA (PMIC_GPIO_PULL_UP_1P5)
+ 3: 31.5uA (PMIC_GPIO_PULL_UP_31P5)
+ 4: 1.5uA + 30uA boost (PMIC_GPIO_PULL_UP_1P5_30)
+ If this property is ommited 30uA strength will be used if
+ pull up is selected
+
+- bias-high-impedance:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins will put in high-Z mode and disabled.
+
+- input-enable:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are put in input mode.
+
+- output-high:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ high.
+
+- output-low:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ low.
+
+- power-source:
+ Usage: optional
+ Value type: <u32>
+ Definition: Selects the power source for the specified pins. Valid
+ power sources are defined per chip in
+ <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+- qcom,drive-strength:
+ Usage: optional
+ Value type: <u32>
+ Definition: Selects the drive strength for the specified pins. Value
+ drive strengths are:
+ 0: no (PMIC_GPIO_STRENGTH_NO)
+ 1: high (PMIC_GPIO_STRENGTH_HIGH) 0.9mA @ 1.8V - 1.9mA @ 2.6V
+ 2: medium (PMIC_GPIO_STRENGTH_MED) 0.6mA @ 1.8V - 1.25mA @ 2.6V
+ 3: low (PMIC_GPIO_STRENGTH_LOW) 0.15mA @ 1.8V - 0.3mA @ 2.6V
+ as defined in <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+- drive-push-pull:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in push-pull mode.
+
+- drive-open-drain:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in open-drain mode.
+
+- drive-open-source:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in open-source mode.
+
+Example:
+
+ pm8921_gpio: gpio@150 {
+ compatible = "qcom,pm8921-gpio";
+ reg = <0x150 0x160>;
+ interrupts = <192 1>, <193 1>, <194 1>,
+ <195 1>, <196 1>, <197 1>,
+ <198 1>, <199 1>, <200 1>,
+ <201 1>, <202 1>, <203 1>,
+ <204 1>, <205 1>, <206 1>,
+ <207 1>, <208 1>, <209 1>,
+ <210 1>, <211 1>, <212 1>,
+ <213 1>, <214 1>, <215 1>,
+ <216 1>, <217 1>, <218 1>,
+ <219 1>, <220 1>, <221 1>,
+ <222 1>, <223 1>, <224 1>,
+ <225 1>, <226 1>, <227 1>,
+ <228 1>, <229 1>, <230 1>,
+ <231 1>, <232 1>, <233 1>,
+ <234 1>, <235 1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pm8921_gpio_keys: gpio-keys {
+ volume-keys {
+ pins = "gpio20", "gpio21";
+ function = "normal";
+
+ input-enable;
+ bias-pull-up;
+ drive-push-pull;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8921_GPIO_S4>;
+ };
+ };
+ };
diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
new file mode 100644
index 0000000..fa74d7c
--- /dev/null
+++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
@@ -0,0 +1,142 @@
+/*
+ * This header provides constants for the Qualcomm PMIC GPIO binding.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_QCOM_PMIC_GPIO_H
+#define _DT_BINDINGS_PINCTRL_QCOM_PMIC_GPIO_H
+
+#define PMIC_GPIO_PULL_UP_30 0
+#define PMIC_GPIO_PULL_UP_1P5 1
+#define PMIC_GPIO_PULL_UP_31P5 2
+#define PMIC_GPIO_PULL_UP_1P5_30 3
+
+#define PMIC_GPIO_STRENGTH_NO 0
+#define PMIC_GPIO_STRENGTH_HIGH 1
+#define PMIC_GPIO_STRENGTH_MED 2
+#define PMIC_GPIO_STRENGTH_LOW 3
+
+/*
+ * Note: PM8018 GPIO3 and GPIO4 are supporting
+ * only S3 and L2 options (1.8V)
+ */
+#define PM8018_GPIO_L6 0
+#define PM8018_GPIO_L5 1
+#define PM8018_GPIO_S3 2
+#define PM8018_GPIO_L14 3
+#define PM8018_GPIO_L2 4
+#define PM8018_GPIO_L4 5
+#define PM8018_GPIO_VDD 6
+
+/*
+ * Note: PM8038 GPIO7 and GPIO8 are supporting
+ * only L11 and L4 options (1.8V)
+ */
+#define PM8038_GPIO_VPH 0
+#define PM8038_GPIO_BB 1
+#define PM8038_GPIO_L11 2
+#define PM8038_GPIO_L15 3
+#define PM8038_GPIO_L4 4
+#define PM8038_GPIO_L3 5
+#define PM8038_GPIO_L17 6
+
+#define PM8058_GPIO_VPH 0
+#define PM8058_GPIO_BB 1
+#define PM8058_GPIO_S3 2
+#define PM8058_GPIO_L3 3
+#define PM8058_GPIO_L7 4
+#define PM8058_GPIO_L6 5
+#define PM8058_GPIO_L5 6
+#define PM8058_GPIO_L2 7
+
+#define PM8917_GPIO_VPH 0
+#define PM8917_GPIO_S4 2
+#define PM8917_GPIO_L15 3
+#define PM8917_GPIO_L4 4
+#define PM8917_GPIO_L3 5
+#define PM8917_GPIO_L17 6
+
+#define PM8921_GPIO_VPH 0
+#define PM8921_GPIO_BB 1
+#define PM8921_GPIO_S4 2
+#define PM8921_GPIO_L15 3
+#define PM8921_GPIO_L4 4
+#define PM8921_GPIO_L3 5
+#define PM8921_GPIO_L17 6
+
+/*
+ * Note: PM8941 gpios from 15 to 18 are supporting
+ * only S3 and L6 options (1.8V)
+ */
+#define PM8941_GPIO_VPH 0
+#define PM8941_GPIO_L1 1
+#define PM8941_GPIO_S3 2
+#define PM8941_GPIO_L6 3
+
+/*
+ * Note: PMA8084 gpios from 15 to 18 are supporting
+ * only S4 and L6 options (1.8V)
+ */
+#define PMA8084_GPIO_VPH 0
+#define PMA8084_GPIO_L1 1
+#define PMA8084_GPIO_S4 2
+#define PMA8084_GPIO_L6 3
+
+/* To be used with "function" */
+#define PMIC_GPIO_FUNC_NORMAL "normal"
+#define PMIC_GPIO_FUNC_PAIRED "paired"
+#define PMIC_GPIO_FUNC_FUNC1 "func1"
+#define PMIC_GPIO_FUNC_FUNC2 "func2"
+#define PMIC_GPIO_FUNC_DTEST1 "dtest1"
+#define PMIC_GPIO_FUNC_DTEST2 "dtest2"
+#define PMIC_GPIO_FUNC_DTEST3 "dtest3"
+#define PMIC_GPIO_FUNC_DTEST4 "dtest4"
+
+#define PM8038_GPIO1_2_LPG_DRV PMIC_GPIO_FUNC_FUNC1
+#define PM8038_GPIO3_5V_BOOST_EN PMIC_GPIO_FUNC_FUNC1
+#define PM8038_GPIO4_SSBI_ALT_CLK PMIC_GPIO_FUNC_FUNC1
+#define PM8038_GPIO5_6_EXT_REG_EN PMIC_GPIO_FUNC_FUNC1
+#define PM8038_GPIO10_11_EXT_REG_EN PMIC_GPIO_FUNC_FUNC1
+#define PM8038_GPIO6_7_CLK PMIC_GPIO_FUNC_FUNC1
+#define PM8038_GPIO9_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1
+#define PM8038_GPIO6_12_KYPD_DRV PMIC_GPIO_FUNC_FUNC2
+
+#define PM8058_GPIO7_8_MP3_CLK PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO7_8_BCLK_19P2MHZ PMIC_GPIO_FUNC_FUNC2
+#define PM8058_GPIO9_26_KYPD_DRV PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO21_23_UART_TX PMIC_GPIO_FUNC_FUNC2
+#define PM8058_GPIO24_26_LPG_DRV PMIC_GPIO_FUNC_FUNC2
+#define PM8058_GPIO33_BCLK_19P2MHZ PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO34_35_MP3_CLK PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO36_BCLK_19P2MHZ PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO37_UPL_OUT PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO37_UART_M_RX PMIC_GPIO_FUNC_FUNC2
+#define PM8058_GPIO38_XO_SLEEP_CLK PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO38_39_CLK_32KHZ PMIC_GPIO_FUNC_FUNC2
+#define PM8058_GPIO39_MP3_CLK PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO40_EXT_BB_EN PMIC_GPIO_FUNC_FUNC1
+
+#define PM8917_GPIO9_18_KEYP_DRV PMIC_GPIO_FUNC_FUNC1
+#define PM8917_GPIO20_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1
+#define PM8917_GPIO21_23_UART_TX PMIC_GPIO_FUNC_FUNC2
+#define PM8917_GPIO25_26_EXT_REG_EN PMIC_GPIO_FUNC_FUNC1
+#define PM8917_GPIO37_38_XO_SLEEP_CLK PMIC_GPIO_FUNC_FUNC1
+#define PM8917_GPIO37_38_MP3_CLK PMIC_GPIO_FUNC_FUNC2
+
+#define PM8941_GPIO9_14_KYPD_DRV PMIC_GPIO_FUNC_FUNC1
+#define PM8941_GPIO15_18_DIV_CLK PMIC_GPIO_FUNC_FUNC1
+#define PM8941_GPIO15_18_SLEEP_CLK PMIC_GPIO_FUNC_FUNC2
+#define PM8941_GPIO23_26_KYPD_DRV PMIC_GPIO_FUNC_FUNC1
+#define PM8941_GPIO23_26_LPG_DRV_HI PMIC_GPIO_FUNC_FUNC2
+#define PM8941_GPIO31_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1
+#define PM8941_GPIO33_36_LPG_DRV_3D PMIC_GPIO_FUNC_FUNC1
+#define PM8941_GPIO33_36_LPG_DRV_HI PMIC_GPIO_FUNC_FUNC2
+
+#define PMA8084_GPIO4_5_LPG_DRV PMIC_GPIO_FUNC_FUNC1
+#define PMA8084_GPIO7_10_LPG_DRV PMIC_GPIO_FUNC_FUNC1
+#define PMA8084_GPIO5_14_KEYP_DRV PMIC_GPIO_FUNC_FUNC2
+#define PMA8084_GPIO19_21_KEYP_DRV PMIC_GPIO_FUNC_FUNC2
+#define PMA8084_GPIO15_18_DIV_CLK PMIC_GPIO_FUNC_FUNC1
+#define PMA8084_GPIO15_18_SLEEP_CLK PMIC_GPIO_FUNC_FUNC2
+#define PMA8084_GPIO22_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1
+
+#endif
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/