Re: [PATCH v8 1/2] i2c: imx: add DMA support for freescale i2c driver

From: Wolfram Sang
Date: Fri Oct 03 2014 - 03:54:23 EST

Next message: Russell King - ARM Linux: "Re: linux-next: build failure after merge of the arm-soc tree"
Previous message: Peter Zijlstra: "Re: [PATCH RFC] sched,idle: teach select_idle_sibling about idle states"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

thanks for this submission. Here is my review.

On Thu, Sep 25, 2014 at 04:11:28PM +0800, Yuan Yao wrote:
> Add dma support for i2c. This function depend on DMA driver.
> You can turn on it by write both the dmas and dma-name properties in dts node.
> DMA is optional, even DMA request unsuccessfully, i2c can also work well.
>
> Signed-off-by: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
> ---
> drivers/i2c/busses/i2c-imx.c | 352 +++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 342 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
> index 613069b..c643756 100644
> --- a/drivers/i2c/busses/i2c-imx.c
> +++ b/drivers/i2c/busses/i2c-imx.c
> @@ -37,22 +37,27 @@
> /** Includes *******************************************************************
> *******************************************************************************/
>
> -#include <linux/init.h>
> -#include <linux/kernel.h>
> -#include <linux/module.h>
> +#include <linux/clk.h>
> +#include <linux/completion.h>
> +#include <linux/delay.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/dmaengine.h>
> +#include <linux/dmapool.h>
> #include <linux/errno.h>
> #include <linux/err.h>
> #include <linux/interrupt.h>
> -#include <linux/delay.h>
> #include <linux/i2c.h>
> +#include <linux/init.h>
> #include <linux/io.h>
> -#include <linux/sched.h>
> -#include <linux/platform_device.h>
> -#include <linux/clk.h>
> -#include <linux/slab.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> +#include <linux/of_dma.h>
> #include <linux/platform_data/i2c-imx.h>
> +#include <linux/platform_device.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>

This is a seperate patch.

> @@ -432,6 +587,168 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
> return IRQ_NONE;
> }
>
> +static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
> + struct i2c_msg *msgs)
> +{
> + int result;
> + unsigned int temp = 0;
> + unsigned long orig_jiffies = jiffies;
> + struct imx_i2c_dma *dma = i2c_imx->dma;
> + struct device *dev = &i2c_imx->adapter.dev;
> +
> + dev_dbg(dev, "<%s> write slave address: addr=0x%x\n",
> + __func__, msgs->addr << 1);

That debug should really go. We have other means to display ongoing I2C
transactions and their address.

> +
> + dma->chan_using = dma->chan_tx;
> + dma->dma_transfer_dir = DMA_MEM_TO_DEV;
> + dma->dma_data_dir = DMA_TO_DEVICE;
> + dma->dma_len = msgs->len - 1;
> + result = i2c_imx_dma_xfer(i2c_imx, msgs);
> + if (result)
> + return result;
> +
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> + temp |= I2CR_DMAEN;
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> + /*
> + * Write slave address.
> + * The first byte muse be transmitted by the CPU.

"must"

> + */
> + imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
> + reinit_completion(&i2c_imx->dma->cmd_complete);
> + result = wait_for_completion_interruptible_timeout(
> + &i2c_imx->dma->cmd_complete,
> + msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT));
> + if (result <= 0) {
> + dmaengine_terminate_all(dma->chan_using);
> + if (result)
> + return result;
> + else
> + return -ETIMEDOUT;
> + }
> +
> + /* Waiting for Transfer complete. */

"transfer"

> + while (1) {
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> + if (temp & I2SR_ICF)
> + break;
> + if (time_after(jiffies, orig_jiffies +
> + msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT))) {
> + dev_dbg(dev, "<%s> Timeout\n", __func__);
> + return -ETIMEDOUT;
> + }
> + schedule();

That might have been asked before. Is there no interrupt for this?

> + }
> +
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> + temp &= ~I2CR_DMAEN;
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> + /* The last data byte must be transferred by the CPU. */
> + imx_i2c_write_reg(msgs->buf[msgs->len-1],
> + i2c_imx, IMX_I2C_I2DR);
> + result = i2c_imx_trx_complete(i2c_imx);
> + if (result)
> + return result;
> +
> + result = i2c_imx_acked(i2c_imx);
> + if (result)
> + return result;
> +
> + return 0;
> +}
> +
> +static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
> + struct i2c_msg *msgs, bool is_lastmsg)
> +{
> + int result;
> + unsigned int temp;
> + unsigned long orig_jiffies;
> + struct imx_i2c_dma *dma = i2c_imx->dma;
> + struct device *dev = &i2c_imx->adapter.dev;
> +
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> + temp |= I2CR_DMAEN;
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> + dma->chan_using = dma->chan_rx;
> + dma->dma_transfer_dir = DMA_DEV_TO_MEM;
> + dma->dma_data_dir = DMA_FROM_DEVICE;
> + /* The last two data bytes must be transferred by the CPU. */
> + dma->dma_len = msgs->len - 2;
> + result = i2c_imx_dma_xfer(i2c_imx, msgs);
> + if (result)
> + return result;
> +
> + reinit_completion(&i2c_imx->dma->cmd_complete);
> + result = wait_for_completion_interruptible_timeout(
> + &i2c_imx->dma->cmd_complete,
> + msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT));
> + if (result <= 0) {
> + dmaengine_terminate_all(dma->chan_using);
> + if (result)
> + return result;
> + else
> + return -ETIMEDOUT;

return result ?: -ETIMEDOUT;

> + }
> +
> + /* waiting for Transfer complete. */

"transfer"

> + while (1) {
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> + if (temp & I2SR_ICF)
> + break;
> + if (time_after(jiffies, orig_jiffies +
> + msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT))) {
> + dev_dbg(dev, "<%s> Timeout\n", __func__);
> + return -ETIMEDOUT;
> + }
> + schedule();
> + }
> +
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> + temp &= ~I2CR_DMAEN;
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> + /* read n-1 byte data */
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> + temp |= I2CR_TXAK;
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> + msgs->buf[msgs->len-2] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> + /* read n byte data */
> + result = i2c_imx_trx_complete(i2c_imx);
> + if (result)
> + return result;
> +
> + if (is_lastmsg) {
> + /*
> + * It must generate STOP before read I2DR to prevent
> + * controller from generating another clock cycle
> + */
> + dev_dbg(dev, "<%s> clear MSTA\n", __func__);
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> + temp &= ~(I2CR_MSTA | I2CR_MTX);
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> + i2c_imx_bus_busy(i2c_imx, 0);
> + i2c_imx->stopped = 1;
> + } else {
> + /*
> + * For i2c master receiver repeat restart operation like:
> + * read -> repeat MSTA -> read/write
> + * The controller must set MTX before read the last byte in
> + * the first read operation, otherwise the first read cost
> + * one extra clock cycle.
> + */
> + temp = readb(i2c_imx->base + IMX_I2C_I2CR);
> + temp |= I2CR_MTX;
> + writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
> + }
> + msgs->buf[msgs->len-1] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> +
> + return 0;
> +}
> +
> static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
> {
> int i, result;
> @@ -501,6 +818,9 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
>
> dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
>
> + if (i2c_imx->dma && msgs->len >= IMX_I2C_DMA_THRESHOLD && !block_data)
> + return i2c_imx_dma_read(i2c_imx, msgs, is_lastmsg);
> +
> /* read data */
> for (i = 0; i < msgs->len; i++) {
> u8 len = 0;
> @@ -615,8 +935,12 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
> #endif
> if (msgs[i].flags & I2C_M_RD)
> result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg);
> - else
> - result = i2c_imx_write(i2c_imx, &msgs[i]);
> + else {
> + if (i2c_imx->dma && msgs[i].len >= IMX_I2C_DMA_THRESHOLD)
> + result = i2c_imx_dma_write(i2c_imx, &msgs[i]);
> + else
> + result = i2c_imx_write(i2c_imx, &msgs[i]);
> + }
> if (result)
> goto fail0;
> }
> @@ -651,6 +975,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
> struct imxi2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
> void __iomem *base;
> int irq, ret;
> + dma_addr_t phy_addr;
>
> dev_dbg(&pdev->dev, "<%s>\n", __func__);
>
> @@ -661,6 +986,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
> }
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + phy_addr = (dma_addr_t)res->start;

res can be NULL! Move it after it has been checked...

> base = devm_ioremap_resource(&pdev->dev, res);
> if (IS_ERR(base))
> return PTR_ERR(base);

...here.

> @@ -740,6 +1066,9 @@ static int i2c_imx_probe(struct platform_device *pdev)
> i2c_imx->adapter.name);
> dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
>
> + /* Init DMA config if support*/
> + i2c_imx_dma_request(i2c_imx, phy_addr);
> +
> return 0; /* Return OK */
> }
>
> @@ -751,6 +1080,9 @@ static int i2c_imx_remove(struct platform_device *pdev)
> dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
> i2c_del_adapter(&i2c_imx->adapter);
>
> + if (i2c_imx->dma)
> + i2c_imx_dma_free(i2c_imx);
> +

Looks mostly good, though.

Thanks,

Wolfram

Attachment: signature.asc
Description: Digital signature

Next message: Russell King - ARM Linux: "Re: linux-next: build failure after merge of the arm-soc tree"
Previous message: Peter Zijlstra: "Re: [PATCH RFC] sched,idle: teach select_idle_sibling about idle states"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]