Re: [PATCH v7 5/5] ARM: dts: enable Thermal on rk3288-evb board

[Doug Anderson]

Caesar,

On Sun, Sep 28, 2014 at 3:38 AM, Caesar Wang <caesar.wang@xxxxxxxxxxxxxx> wrote:
> when a thermal shutdown at 125C.Via GPIO give PMIC,
> Reset the entire chip.
>
> Signed-off-by: Caesar Wang <caesar.wang@xxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/rk3288-evb.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
> index 2964370..a6872aa 100644
> --- a/arch/arm/boot/dts/rk3288-evb.dtsi
> +++ b/arch/arm/boot/dts/rk3288-evb.dtsi
> @@ -101,6 +101,11 @@
>         status = "okay";
>  };
>
> +&tsadc {
> +       reset-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;

I don't see "reset-gpios" mentioned in the bindings or the code.  I
think you can just remove this, right?

> +       status = "okay";
> +};
> +
>  &pinctrl {
>         buttons {
>                 pwrbtn: pwrbtn {
> --
> 1.9.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/