[PATCH 3.14 133/238] ASoC: davinci-mcasp: Correct rx format unit configuration

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>

commit fe0a29e163a5d045c73faab682a8dac71c2f8012 upstream.

In case of capture we should not use rotation. The reverse and mask is
enough to get the data align correctly from the bus to MCU:
Format	  data from bus    after reverse (XRBUF)
S16_LE:  |LSB|MSB|xxx|xxx|  |xxx|xxx|MSB|LSB|
S24_3LE: |LSB|DAT|MSB|xxx|  |xxx|MSB|DAT|LSB|
S24_LE:  |LSB|DAT|MSB|xxx|  |xxx|MSB|DAT|LSB|
S32_LE:  |LSB|DAT|DAT|MSB|  |MSB|DAT|DAT|LSB|

With this patch all supported formats will work for playback and capture.

Reported-by: Jyri Sarha <jsarha@xxxxxx> (broken S24_3LE capture)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 sound/soc/davinci/davinci-mcasp.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -418,8 +418,17 @@ static int davinci_config_channel_size(s
 {
 	u32 fmt;
 	u32 tx_rotate = (word_length / 4) & 0x7;
-	u32 rx_rotate = (32 - word_length) / 4;
 	u32 mask = (1ULL << word_length) - 1;
+	/*
+	 * For captured data we should not rotate, inversion and masking is
+	 * enoguh to get the data to the right position:
+	 * Format	  data from bus		after reverse (XRBUF)
+	 * S16_LE:	|LSB|MSB|xxx|xxx|	|xxx|xxx|MSB|LSB|
+	 * S24_3LE:	|LSB|DAT|MSB|xxx|	|xxx|MSB|DAT|LSB|
+	 * S24_LE:	|LSB|DAT|MSB|xxx|	|xxx|MSB|DAT|LSB|
+	 * S32_LE:	|LSB|DAT|DAT|MSB|	|MSB|DAT|DAT|LSB|
+	 */
+	u32 rx_rotate = 0;
 
 	/*
 	 * if s BCLK-to-LRCLK ratio has been configured via the set_clkdiv()


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/