[PATCH 31/44] arm: Register with kernel poweroff handler

From: Guenter Roeck
Date: Tue Oct 07 2014 - 01:37:48 EST

Next message: Guenter Roeck: "[PATCH 28/44] x86: olpc: Register xo1 poweroff handler with kernel poweroff handler"
Previous message: Guenter Roeck: "[PATCH 34/44] ia64: Register with kernel poweroff handler"
Next in thread: Nicolas Ferre: "Re: [PATCH 31/44] arm: Register with kernel poweroff handler"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Register with kernel poweroff handler instead of setting pm_power_off
directly. Always use register_poweroff_handler_simple as there is no
indication that more than one poweroff handler is registered.

If the poweroff handler only resets the system or puts the CPU in sleep mode,
select a priority of 0 to indicate that the poweroff handler is one of last
resort. If the poweroff handler powers off the system, select a priority
of 128.

Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
Cc: Andrew Victor <linux@xxxxxxxxxxxx>
Cc: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@xxxxxxxxxxxx>
Cc: Stephen Warren <swarren@xxxxxxxxxxxxx>
Cc: Christian Daudt <bcm@xxxxxxxxxxxxx>
Cc: Matt Porter <mporter@xxxxxxxxxx>
Cc: Anton Vorontsov <anton@xxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx>
Cc: Imre Kaloz <kaloz@xxxxxxxxxxx>
Cc: Krzysztof Halasa <khc@xxxxxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Cc: Jason Cooper <jason@xxxxxxxxxxxxxx>
Cc: Andrew Lunn <andrew@xxxxxxx>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Cc: Eric Miao <eric.y.miao@xxxxxxxxx>
Cc: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
Cc: Robert Jarzmik <robert.jarzmik@xxxxxxx>
Cc: Marek Vasut <marek.vasut@xxxxxxxxx>
Cc: Ben Dooks <ben-linux@xxxxxxxxx>
Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: Tony Prisk <linux@xxxxxxxxxxxxxxx>
Cc: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
arch/arm/kernel/psci.c | 2 +-
arch/arm/mach-at91/board-gsia18s.c | 2 +-
arch/arm/mach-at91/setup.c | 4 ++--
arch/arm/mach-bcm/board_bcm2835.c | 2 +-
arch/arm/mach-cns3xxx/cns3420vb.c | 2 +-
arch/arm/mach-cns3xxx/core.c | 2 +-
arch/arm/mach-highbank/highbank.c | 2 +-
arch/arm/mach-imx/mach-mx31moboard.c | 2 +-
arch/arm/mach-iop32x/em7210.c | 2 +-
arch/arm/mach-iop32x/glantank.c | 2 +-
arch/arm/mach-iop32x/iq31244.c | 2 +-
arch/arm/mach-iop32x/n2100.c | 2 +-
arch/arm/mach-ixp4xx/dsmg600-setup.c | 2 +-
arch/arm/mach-ixp4xx/nas100d-setup.c | 2 +-
arch/arm/mach-ixp4xx/nslu2-setup.c | 2 +-
arch/arm/mach-omap2/board-omap3touchbook.c | 2 +-
arch/arm/mach-orion5x/board-mss2.c | 2 +-
arch/arm/mach-orion5x/dns323-setup.c | 6 +++---
arch/arm/mach-orion5x/kurobox_pro-setup.c | 2 +-
arch/arm/mach-orion5x/ls-chl-setup.c | 2 +-
arch/arm/mach-orion5x/ls_hgl-setup.c | 2 +-
arch/arm/mach-orion5x/lsmini-setup.c | 2 +-
arch/arm/mach-orion5x/mv2120-setup.c | 2 +-
arch/arm/mach-orion5x/net2big-setup.c | 2 +-
arch/arm/mach-orion5x/terastation_pro2-setup.c | 2 +-
arch/arm/mach-orion5x/ts209-setup.c | 2 +-
arch/arm/mach-orion5x/ts409-setup.c | 2 +-
arch/arm/mach-pxa/corgi.c | 2 +-
arch/arm/mach-pxa/mioa701.c | 2 +-
arch/arm/mach-pxa/poodle.c | 2 +-
arch/arm/mach-pxa/spitz.c | 2 +-
arch/arm/mach-pxa/tosa.c | 2 +-
arch/arm/mach-pxa/viper.c | 2 +-
arch/arm/mach-pxa/z2.c | 6 +++---
arch/arm/mach-pxa/zeus.c | 6 +++---
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-jive.c | 2 +-
arch/arm/mach-s3c24xx/mach-vr1000.c | 2 +-
arch/arm/mach-s3c64xx/mach-smartq.c | 2 +-
arch/arm/mach-sa1100/generic.c | 2 +-
arch/arm/mach-sa1100/simpad.c | 2 +-
arch/arm/mach-u300/regulator.c | 2 +-
arch/arm/mach-vt8500/vt8500.c | 2 +-
arch/arm/xen/enlighten.c | 2 +-
44 files changed, 51 insertions(+), 51 deletions(-)

diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c
index f73891b..dd58d86 100644
--- a/arch/arm/kernel/psci.c
+++ b/arch/arm/kernel/psci.c
@@ -264,7 +264,7 @@ static int psci_0_2_init(struct device_node *np)

arm_pm_restart = psci_sys_reset;

- pm_power_off = psci_sys_poweroff;
+ register_poweroff_handler_simple(psci_sys_poweroff, 128);

out_put_node:
of_node_put(np);
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index b729dd1..6722e66 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -521,7 +521,7 @@ static void gsia18s_power_off(void)

static int __init gsia18s_power_off_init(void)
{
- pm_power_off = gsia18s_power_off;
+ register_poweroff_handler_simple(gsia18s_power_off, 128);
return 0;
}

diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index f7a07a5..9989e88 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -329,7 +329,7 @@ void __init at91_ioremap_shdwc(u32 base_addr)
at91_shdwc_base = ioremap(base_addr, 16);
if (!at91_shdwc_base)
panic("Impossible to ioremap at91_shdwc_base\n");
- pm_power_off = at91sam9_poweroff;
+ register_poweroff_handler_simple(at91sam9_poweroff, 128);
}

void __iomem *at91_rstc_base;
@@ -482,7 +482,7 @@ static void at91_dt_shdwc(void)
at91_shdwc_write(AT91_SHDW_MR, wakeup_mode | mode);

end:
- pm_power_off = at91sam9_poweroff;
+ register_poweroff_handler_simple(at91sam9_poweroff, 128);

of_node_put(np);
}
diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c
index 70f2f39..7d5784f 100644
--- a/arch/arm/mach-bcm/board_bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
@@ -111,7 +111,7 @@ static void __init bcm2835_init(void)

bcm2835_setup_restart();
if (wdt_regs)
- pm_power_off = bcm2835_power_off;
+ register_poweroff_handler_simple(bcm2835_power_off, 0);

bcm2835_init_clocks();

diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index d863d87..136b7c6 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -224,7 +224,7 @@ static void __init cns3420_init(void)
cns3xxx_ahci_init();
cns3xxx_sdhci_init();

- pm_power_off = cns3xxx_power_off;
+ register_poweroff_handler_simple(cns3xxx_power_off, 128);
}

static struct map_desc cns3420_io_desc[] __initdata = {
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index f85449a..79e6ead 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -386,7 +386,7 @@ static void __init cns3xxx_init(void)
cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
}

- pm_power_off = cns3xxx_power_off;
+ register_poweroff_handler_simple(cns3xxx_power_off, 128);

of_platform_populate(NULL, of_default_bus_match_table,
cns3xxx_auxdata, NULL);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 8c35ae4..25d0134 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -155,7 +155,7 @@ static void __init highbank_init(void)
sregs_base = of_iomap(np, 0);
WARN_ON(!sregs_base);

- pm_power_off = highbank_power_off;
+ register_poweroff_handler_simple(highbank_power_off, 0);
highbank_pm_init();

bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index bb6f8a5..9b3616f 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -559,7 +559,7 @@ static void __init mx31moboard_init(void)

imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);

- pm_power_off = mx31moboard_poweroff;
+ register_poweroff_handler_simple(mx31moboard_poweroff, 128);

switch (mx31moboard_baseboard) {
case MX31NOBOARD:
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 77e1ff0..beeeb0c2 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -201,7 +201,7 @@ static int __init em7210_request_gpios(void)
return 0;
}

- pm_power_off = em7210_power_off;
+ register_poweroff_handler_simple(em7210_power_off, 128);

return 0;
}
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 547b234..050a8e6 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -199,7 +199,7 @@ static void __init glantank_init_machine(void)
i2c_register_board_info(0, glantank_i2c_devices,
ARRAY_SIZE(glantank_i2c_devices));

- pm_power_off = glantank_power_off;
+ register_poweroff_handler_simple(glantank_power_off, 128);
}

MACHINE_START(GLANTANK, "GLAN Tank")
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 0e1392b..4e9b972 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -293,7 +293,7 @@ static void __init iq31244_init_machine(void)
platform_device_register(&iop3xx_dma_1_channel);

if (is_ep80219())
- pm_power_off = ep80219_power_off;
+ register_poweroff_handler_simple(ep80219_power_off, 128);

if (!is_80219())
platform_device_register(&iop3xx_aau_channel);
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index c1cd80e..171d496 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -356,7 +356,7 @@ static void __init n2100_init_machine(void)
i2c_register_board_info(0, n2100_i2c_devices,
ARRAY_SIZE(n2100_i2c_devices));

- pm_power_off = n2100_power_off;
+ register_poweroff_handler_simple(n2100_power_off, 128);
}

MACHINE_START(N2100, "Thecus N2100")
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 43ee06d..6fb5072 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -281,7 +281,7 @@ static void __init dsmg600_init(void)

platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));

- pm_power_off = dsmg600_power_off;
+ register_poweroff_handler_simple(dsmg600_power_off, 128);
}

MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 4e0f762..bd9a8d6 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -292,7 +292,7 @@ static void __init nas100d_init(void)

platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));

- pm_power_off = nas100d_power_off;
+ register_poweroff_handler_simple(nas100d_power_off, 128);

if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
IRQF_TRIGGER_LOW, "NAS100D reset button", NULL) < 0) {
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 88c025f..c4c5475 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -262,7 +262,7 @@ static void __init nslu2_init(void)

platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));

- pm_power_off = nslu2_power_off;
+ register_poweroff_handler_simple(nslu2_power_off, 128);

if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler,
IRQF_TRIGGER_LOW, "NSLU2 reset button", NULL) < 0) {
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 70b904c..0c0a0e2 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -344,7 +344,7 @@ static void __init omap3_touchbook_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);

- pm_power_off = omap3_touchbook_poweroff;
+ register_poweroff_handler_simple(omap3_touchbook_poweroff, 128);

if (system_rev >= 0x20 && system_rev <= 0x34301000) {
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c
index 66f9c3b..3840d66 100644
--- a/arch/arm/mach-orion5x/board-mss2.c
+++ b/arch/arm/mach-orion5x/board-mss2.c
@@ -86,5 +86,5 @@ static void mss2_power_off(void)
void __init mss2_init(void)
{
/* register mss2 specific power-off method */
- pm_power_off = mss2_power_off;
+ register_poweroff_handler_simple(mss2_power_off, 0);
}
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 56edeab..353ca3d 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -669,7 +669,7 @@ static void __init dns323_init(void)
if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
pr_err("DNS-323: failed to setup power-off GPIO\n");
- pm_power_off = dns323a_power_off;
+ register_poweroff_handler_simple(dns323a_power_off, 128);
break;
case DNS323_REV_B1:
/* 5182 built-in SATA init */
@@ -686,7 +686,7 @@ static void __init dns323_init(void)
if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
pr_err("DNS-323: failed to setup power-off GPIO\n");
- pm_power_off = dns323b_power_off;
+ register_poweroff_handler_simple(dns323b_power_off, 128);
break;
case DNS323_REV_C1:
/* 5182 built-in SATA init */
@@ -696,7 +696,7 @@ static void __init dns323_init(void)
if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
pr_err("DNS-323: failed to setup power-off GPIO\n");
- pm_power_off = dns323c_power_off;
+ register_poweroff_handler_simple(dns323c_power_off, 128);

/* Now, -this- should theorically be done by the sata_mv driver
* once I figure out what's going on there. Maybe the behaviour
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index fe6a48a..c4101f1 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -376,7 +376,7 @@ static void __init kurobox_pro_init(void)
i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);

/* register Kurobox Pro specific power-off method */
- pm_power_off = kurobox_pro_power_off;
+ register_poweroff_handler_simple(kurobox_pro_power_off, 128);
}

#ifdef CONFIG_MACH_KUROBOX_PRO
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 028ea03..005bb04 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -312,7 +312,7 @@ static void __init lschl_init(void)
gpio_set_value(LSCHL_GPIO_USB_POWER, 1);

/* register power-off method */
- pm_power_off = lschl_power_off;
+ register_poweroff_handler_simple(lschl_power_off, 0);

pr_info("%s: finished\n", __func__);
}
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 32b7129..37c29a0 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -259,7 +259,7 @@ static void __init ls_hgl_init(void)
gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);

/* register power-off method */
- pm_power_off = ls_hgl_power_off;
+ register_poweroff_handler_simple(ls_hgl_power_off, 0);

pr_info("%s: finished\n", __func__);
}
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index a6493e7..ffec72f 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -260,7 +260,7 @@ static void __init lsmini_init(void)
gpio_set_value(LSMINI_GPIO_USB_POWER, 1);

/* register power-off method */
- pm_power_off = lsmini_power_off;
+ register_poweroff_handler_simple(lsmini_power_off, 0);

pr_info("%s: finished\n", __func__);
}
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index e032f01..dadc2b9 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -225,7 +225,7 @@ static void __init mv2120_init(void)
if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
pr_err("mv2120: failed to setup power-off GPIO\n");
- pm_power_off = mv2120_power_off;
+ register_poweroff_handler_simple(mv2120_power_off, 128);
}

/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index ba73dc7..3a73dce 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -413,7 +413,7 @@ static void __init net2big_init(void)

if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = net2big_power_off;
+ register_poweroff_handler_simple(net2big_power_off, 128);
else
pr_err("net2big: failed to configure power-off GPIO\n");

diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 6208d12..2a234cb 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -353,7 +353,7 @@ static void __init tsp2_init(void)
i2c_register_board_info(0, &tsp2_i2c_rtc, 1);

/* register Terastation Pro II specific power-off method */
- pm_power_off = tsp2_power_off;
+ register_poweroff_handler_simple(tsp2_power_off, 128);
}

MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 9136797..50bdfbc 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -318,7 +318,7 @@ static void __init qnap_ts209_init(void)
i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);

/* register tsx09 specific power-off method */
- pm_power_off = qnap_tsx09_power_off;
+ register_poweroff_handler_simple(qnap_tsx09_power_off, 128);
}

MACHINE_START(TS209, "QNAP TS-109/TS-209")
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 5c079d31..06a7cc0 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -307,7 +307,7 @@ static void __init qnap_ts409_init(void)
platform_device_register(&ts409_leds);

/* register tsx09 specific power-off method */
- pm_power_off = qnap_tsx09_power_off;
+ register_poweroff_handler_simple(qnap_tsx09_power_off, 128);
}

MACHINE_START(TS409, "QNAP TS-409")
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 06022b2..a93bac0 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -718,7 +718,7 @@ static void corgi_restart(enum reboot_mode mode, const char *cmd)

static void __init corgi_init(void)
{
- pm_power_off = corgi_poweroff;
+ register_poweroff_handler_simple(corgi_poweroff, 0);

/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR |= PCFR_OPDE;
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 29997bd..c4345a4 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -750,7 +750,7 @@ static void __init mioa701_machine_init(void)
pxa_set_keypad_info(&mioa701_keypad_info);
pxa_set_udc_info(&mioa701_udc_info);
pxa_set_ac97_info(&mioa701_ac97_info);
- pm_power_off = mioa701_poweroff;
+ register_poweroff_handler_simple(mioa701_poweroff, 0);
platform_add_devices(devices, ARRAY_SIZE(devices));
gsm_init();

diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 1319916..c9536ed 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -432,7 +432,7 @@ static void __init poodle_init(void)
{
int ret = 0;

- pm_power_off = poodle_poweroff;
+ register_poweroff_handler_simple(poodle_poweroff, 0);

PCFR |= PCFR_OPDE;

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 840c3a4..09f0de8 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -944,7 +944,7 @@ static void spitz_restart(enum reboot_mode mode, const char *cmd)
static void __init spitz_init(void)
{
init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
- pm_power_off = spitz_poweroff;
+ register_poweroff_handler_simple(spitz_poweroff, 0);

PMCR = 0x00;

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c158a6e..3a4af1d 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -940,7 +940,7 @@ static void __init tosa_init(void)

init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);

- pm_power_off = tosa_poweroff;
+ register_poweroff_handler_simple(tosa_poweroff, 0);

PCFR |= PCFR_OPDE;

diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index de3b080..679c8ea 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -919,7 +919,7 @@ static void __init viper_init(void)
{
u8 version;

- pm_power_off = viper_power_off;
+ register_poweroff_handler_simple(viper_power_off, 128);

pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));

diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index e1a121b..e0195ac 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -693,8 +693,6 @@ static void z2_power_off(void)
pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
pxa27x_cpu_pm_enter(PM_SUSPEND_MEM);
}
-#else
-#define z2_power_off NULL
#endif

/******************************************************************************
@@ -719,7 +717,9 @@ static void __init z2_init(void)
z2_keys_init();
z2_pmic_init();

- pm_power_off = z2_power_off;
+#ifdef CONFIG_PM
+ register_poweroff_handler_simple(z2_power_off, 0);
+#endif
}

MACHINE_START(ZIPIT2, "Zipit Z2")
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 205f9bf..6118fd5 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -690,8 +690,6 @@ static void zeus_power_off(void)
local_irq_disable();
cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend);
}
-#else
-#define zeus_power_off NULL
#endif

#ifdef CONFIG_APM_EMULATION
@@ -847,7 +845,9 @@ static void __init zeus_init(void)
__raw_writel(msc0, MSC0);
__raw_writel(msc1, MSC1);

- pm_power_off = zeus_power_off;
+#ifdef CONFIG_PM
+ register_poweroff_handler_simple(zeus_power_off, 0);
+#endif
zeus_setup_apm();

pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index fc3a08d..ca78150 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -579,7 +579,7 @@ static void __init gta02_machine_init(void)
i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));

platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
- pm_power_off = gta02_poweroff;
+ register_poweroff_handler_simple(gta02_poweroff, 128);

regulator_has_full_constraints();
}
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 7804d3c..5a828a3 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -657,7 +657,7 @@ static void __init jive_machine_init(void)
s3c_i2c0_set_platdata(&jive_i2c_cfg);
i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));

- pm_power_off = jive_power_off;
+ register_poweroff_handler_simple(jive_power_off, 128);

platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
}
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index f88c584..40d7655 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -306,7 +306,7 @@ static void vr1000_power_off(void)

static void __init vr1000_map_io(void)
{
- pm_power_off = vr1000_power_off;
+ register_poweroff_handler_simple(vr1000_power_off, 128);

s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index b3d1353..61f0893 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -291,7 +291,7 @@ static int __init smartq_power_off_init(void)
/* leave power on */
gpio_direction_output(S3C64XX_GPK(15), 0);

- pm_power_off = smartq_power_off;
+ register_poweroff_handler_simple(smartq_power_off, 128);

return ret;
}
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index d4ea142..6b839cf 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -311,7 +311,7 @@ static struct platform_device *sa11x0_devices[] __initdata = {

static int __init sa1100_init(void)
{
- pm_power_off = sa1100_power_off;
+ register_poweroff_handler_simple(sa1100_power_off, 0);
return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
}

diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 41e476e..a65ca58 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -373,7 +373,7 @@ static int __init simpad_init(void)
if (ret)
printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device");

- pm_power_off = simpad_power_off;
+ register_poweroff_handler_simple(simpad_power_off, 0);

sa11x0_ppc_configure_mcp();
sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
index 0493a84..c98eb6e 100644
--- a/arch/arm/mach-u300/regulator.c
+++ b/arch/arm/mach-u300/regulator.c
@@ -98,7 +98,7 @@ static int __init __u300_init_boardpower(struct platform_device *pdev)
U300_SYSCON_PMCR_DCON_ENABLE, 0);

/* Register globally exported PM poweroff hook */
- pm_power_off = u300_pm_poweroff;
+ register_poweroff_handler_simple(u300_pm_poweroff, 128);

return 0;
}
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 2da7be3..515946b 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -155,7 +155,7 @@ static void __init vt8500_init(void)
pr_err("%s:ioremap(power_off) failed\n", __func__);
}
if (pmc_base)
- pm_power_off = &vt8500_power_off;
+ register_poweroff_handler_simple(vt8500_power_off, 0);
else
pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);

diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 0e15f01..0da639b 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -336,7 +336,7 @@ static int __init xen_pm_init(void)
if (!xen_domain())
return -ENODEV;

- pm_power_off = xen_power_off;
+ register_poweroff_handler_simple(xen_power_off, 128);
arm_pm_restart = xen_restart;

return 0;
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-alpha" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html

Next message: Guenter Roeck: "[PATCH 28/44] x86: olpc: Register xo1 poweroff handler with kernel poweroff handler"
Previous message: Guenter Roeck: "[PATCH 34/44] ia64: Register with kernel poweroff handler"
Next in thread: Nicolas Ferre: "Re: [PATCH 31/44] arm: Register with kernel poweroff handler"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]