[PATCH v3] ARM: EXYNOS: add Exynos3250 PMU support

From: Bartlomiej Zolnierkiewicz
Date: Tue Oct 07 2014 - 08:56:38 EST

Next message: Markus Pargmann: "Re: [PATCH 1/5] regulator: Add ena_gpio_valid config"
Previous message: Johan Hovold: "Re: [PATCH 2/6] mfd: rtsx_usb: fix platform device-id collision"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This is needed for suspend/resume and cpuidle AFTR mode support.

Cc: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
Cc: Vikas Sajjan <vikas.sajjan@xxxxxxxxxxx>
Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
v3:
- rebased on top of for-next branch of linux-samsung.git and
[PATCH v7] mfd: syscon: Decouple syscon interface from platform devices
(https://lkml.org/lkml/2014/9/30/156)
[PATCH v9 0/2] ARM: Exynos: Convert PMU implementation into a platform driver
(https://lkml.org/lkml/2014/10/6/89)
[PATCH v9 0/2] Adds PMU and S2R support for exynos5420
(http://www.spinics.net/lists/arm-kernel/msg368207.html)

v2:
- rebased on top of next-20140708 and
http://www.mail-archive.com/linux-samsung-soc@xxxxxxxxxxxxxxx/msg32410.html
http://www.mail-archive.com/linux-samsung-soc@xxxxxxxxxxxxxxx/msg33660.html
http://www.mail-archive.com/linux-samsung-soc@xxxxxxxxxxxxxxx/msg33675.html

this patch also applies fine after/before Exynos5800 PMU support:
http://www.mail-archive.com/linux-samsung-soc@xxxxxxxxxxxxxxx/msg33835.html

arch/arm/mach-exynos/pmu.c | 173 ++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-exynos/regs-pmu.h | 129 ++++++++++++++++++++++++++++++
2 files changed, 302 insertions(+)

diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index 98824bc..3bd1038 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -31,6 +31,7 @@ struct exynos_pmu_data {

void (*pmu_init)(void);
void (*powerdown_conf)(enum sys_powerdown);
+ void (*powerdown_conf_extra)(enum sys_powerdown);
};

struct exynos_pmu_context {
@@ -51,6 +52,98 @@ static inline u32 pmu_raw_readl(u32 offset)
return readl_relaxed(pmu_base_addr + offset);
}

+static struct exynos_pmu_conf exynos3250_pmu_config[] = {
+ /* { .offset = offset, .val = { AFTR, W-AFTR, SLEEP } */
+ { EXYNOS3_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG,{ 0x0, 0x0, 0x0} },
+ { EXYNOS3_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG,{ 0x0, 0x0, 0x0} },
+ { EXYNOS3_ARM_CORE2_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG,{ 0x0, 0x0, 0x0} },
+ { EXYNOS3_ARM_CORE3_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG,{ 0x0, 0x0, 0x0} },
+ { EXYNOS3_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS3_ARM_L2_SYS_PWR_REG, { 0x0, 0x0, 0x3} },
+ { EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS3_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_TOP_PWR_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
+ { EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
+ { EXYNOS3_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG,{ 0x1, 0x1, 0x0} },
+ { EXYNOS3_CAM_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_G3D_SYS_PWR_REG, { 0x7, 0x7, 0x0} },
+ { EXYNOS3_LCD0_SYS_PWR_REG, { 0x7, 0x7, 0x0} },
+ { EXYNOS3_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_MAUDIO_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { PMU_TABLE_END,},
+};
+
static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
{ S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
@@ -495,6 +588,43 @@ static struct exynos_pmu_conf exynos5420_pmu_config[] = {
{ PMU_TABLE_END,},
};

+static unsigned int const exynos3250_list_feed[] = {
+ EXYNOS3_ARM_CORE_OPTION(0),
+ EXYNOS3_ARM_CORE_OPTION(1),
+ EXYNOS3_ARM_CORE_OPTION(2),
+ EXYNOS3_ARM_CORE_OPTION(3),
+ EXYNOS3_ARM_COMMON_OPTION,
+ EXYNOS3_TOP_PWR_OPTION,
+ EXYNOS3_CORE_TOP_PWR_OPTION,
+ S5P_CAM_OPTION,
+ S5P_MFC_OPTION,
+ S5P_G3D_OPTION,
+ S5P_LCD0_OPTION,
+ S5P_ISP_OPTION,
+};
+
+static void exynos3250_powerdown_conf_extra(enum sys_powerdown mode)
+{
+ unsigned int i;
+ unsigned int tmp;
+
+ /* Enable only SC_FEEDBACK */
+ for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) {
+ tmp = pmu_raw_readl(exynos3250_list_feed[i]);
+ tmp &= ~(EXYNOS3_OPTION_USE_SC_COUNTER);
+ tmp |= EXYNOS3_OPTION_USE_SC_FEEDBACK;
+ pmu_raw_writel(tmp, exynos3250_list_feed[i]);
+ }
+
+ if (mode != SYS_SLEEP)
+ return;
+
+ pmu_raw_writel(0x00000BB8, EXYNOS3_XUSBXTI_DURATION);
+ pmu_raw_writel(0x00000BB8, EXYNOS3_XXTI_DURATION);
+ pmu_raw_writel(0x00001D4C, EXYNOS3_EXT_REGULATOR_DURATION);
+ pmu_raw_writel(0x00001D4C, EXYNOS3_EXT_REGULATOR_COREBLK_DURATION);
+}
+
static unsigned int const exynos5_list_both_cnt_feed[] = {
EXYNOS5_ARM_CORE0_OPTION,
EXYNOS5_ARM_CORE1_OPTION,
@@ -632,6 +762,9 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode)
pmu_data->pmu_config[i].offset);
}

+ if (pmu_data->powerdown_conf_extra)
+ pmu_data->powerdown_conf_extra(mode);
+
if (pmu_data->pmu_config_extra) {
for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++)
pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode],
@@ -639,6 +772,37 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode)
}
}

+static void exynos3250_pmu_init(void)
+{
+ unsigned int value;
+
+ /*
+ * To prevent form issuing new bus request form L2 memory system
+ * If core status is power down, should be set '1' to L2 power down
+ */
+ value = pmu_raw_readl(EXYNOS3_ARM_COMMON_OPTION);
+ value |= EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+ pmu_raw_writel(value, EXYNOS3_ARM_COMMON_OPTION);
+
+ /* Enable USE_STANDBY_WFI for all CORE */
+ pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
+
+ /*
+ * Set PSHOLD port for ouput high
+ */
+ value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
+ value |= S5P_PS_HOLD_OUTPUT_HIGH;
+ pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
+ /*
+ * Enable signal for PSHOLD port
+ */
+ value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
+ value |= S5P_PS_HOLD_EN;
+ pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
+
+ pr_info("EXYNOS3250 PMU Initialize\n");
+}
+
static void exynos5250_pmu_init(void)
{
unsigned int value;
@@ -717,6 +881,12 @@ static void exynos5420_pmu_init(void)
}

+static const struct exynos_pmu_data exynos3250_pmu_data = {
+ .pmu_config = exynos3250_pmu_config,
+ .pmu_init = exynos3250_pmu_init,
+ .powerdown_conf_extra = exynos3250_powerdown_conf_extra,
+};
+
static const struct exynos_pmu_data exynos4210_pmu_data = {
.pmu_config = exynos4210_pmu_config,
};
@@ -747,6 +917,9 @@ static struct exynos_pmu_data exynos5420_pmu_data = {
*/
static const struct of_device_id exynos_pmu_of_device_ids[] = {
{
+ .compatible = "samsung,exynos3250-pmu",
+ .data = &exynos3250_pmu_data,
+ }, {
.compatible = "samsung,exynos4210-pmu",
.data = &exynos4210_pmu_data,
}, {
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index 46b973b..130f3e1 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -19,7 +19,20 @@
#define S5P_CENTRAL_SEQ_OPTION 0x0208

#define S5P_USE_STANDBY_WFI0 (1 << 16)
+#define S5P_USE_STANDBY_WFI1 (1 << 17)
+#define S5P_USE_STANDBY_WFI2 (1 << 19)
+#define S5P_USE_STANDBY_WFI3 (1 << 20)
#define S5P_USE_STANDBY_WFE0 (1 << 24)
+#define S5P_USE_STANDBY_WFE1 (1 << 25)
+#define S5P_USE_STANDBY_WFE2 (1 << 27)
+#define S5P_USE_STANDBY_WFE3 (1 << 28)
+
+#define S5P_USE_STANDBY_WFI_ALL \
+ (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFI1 | \
+ S5P_USE_STANDBY_WFI2 | S5P_USE_STANDBY_WFI3 | \
+ S5P_USE_STANDBY_WFE0 | S5P_USE_STANDBY_WFE1 | \
+ S5P_USE_STANDBY_WFE2 | S5P_USE_STANDBY_WFE3)
+
#define S5P_USE_DELAYED_RESET_ASSERTION BIT(12)

#define EXYNOS_CORE_PO_RESET(n) ((1 << 4) << n)
@@ -154,6 +167,17 @@
#define S5P_PAD_RET_EBIA_OPTION 0x3188
#define S5P_PAD_RET_EBIB_OPTION 0x31A8

+#define S5P_PS_HOLD_CONTROL 0x330C
+#define S5P_PS_HOLD_EN (1 << 31)
+#define S5P_PS_HOLD_OUTPUT_HIGH (3 << 8)
+
+#define S5P_CAM_OPTION 0x3C08
+#define S5P_MFC_OPTION 0x3C48
+#define S5P_G3D_OPTION 0x3C68
+#define S5P_LCD0_OPTION 0x3C88
+#define S5P_LCD1_OPTION 0x3CA8
+#define S5P_ISP_OPTION S5P_LCD1_OPTION
+
#define S5P_CORE_LOCAL_PWR_EN 0x3
#define S5P_CORE_WAKEUP_FROM_LOCAL_CFG (0x3 << 8)

@@ -214,6 +238,111 @@
#define S5P_DIS_IRQ_CORE3 0x1034
#define S5P_DIS_IRQ_CENTRAL3 0x1038

+/* Only for EXYNOS3XXX */
+#define EXYNOS3_ARM_CORE0_SYS_PWR_REG 0x1000
+#define EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG 0x1004
+#define EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG 0x1008
+#define EXYNOS3_ARM_CORE1_SYS_PWR_REG 0x1010
+#define EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG 0x1014
+#define EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG 0x1018
+#define EXYNOS3_ARM_CORE2_SYS_PWR_REG 0x1020
+#define EXYNOS3_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG 0x1024
+#define EXYNOS3_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG 0x1028
+#define EXYNOS3_ARM_CORE3_SYS_PWR_REG 0x1030
+#define EXYNOS3_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG 0x1034
+#define EXYNOS3_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG 0x1038
+#define EXYNOS3_ISP_ARM_SYS_PWR_REG 0x1050
+#define EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1054
+#define EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1058
+#define EXYNOS3_ARM_COMMON_SYS_PWR_REG 0x1080
+#define EXYNOS3_ARM_L2_SYS_PWR_REG 0x10C0
+#define EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG 0x1100
+#define EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG 0x1104
+#define EXYNOS3_CMU_RESET_SYS_PWR_REG 0x110C
+#define EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG 0x1110
+#define EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG 0x1114
+#define EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG 0x111C
+#define EXYNOS3_APLL_SYSCLK_SYS_PWR_REG 0x1120
+#define EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG 0x1124
+#define EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG 0x1128
+#define EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG 0x112C
+#define EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG 0x1130
+#define EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG 0x1134
+#define EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG 0x1138
+#define EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG 0x1140
+#define EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1148
+#define EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG 0x114C
+#define EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG 0x1150
+#define EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG 0x1154
+#define EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG 0x1158
+#define EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG 0x1160
+#define EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG 0x1168
+#define EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG 0x116C
+#define EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG 0x1170
+#define EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG 0x1174
+#define EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG 0x1178
+#define EXYNOS3_TOP_BUS_SYS_PWR_REG 0x1180
+#define EXYNOS3_TOP_RETENTION_SYS_PWR_REG 0x1184
+#define EXYNOS3_TOP_PWR_SYS_PWR_REG 0x1188
+#define EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG 0x1190
+#define EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG 0x1194
+#define EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG 0x1198
+#define EXYNOS3_LOGIC_RESET_SYS_PWR_REG 0x11A0
+#define EXYNOS3_OSCCLK_GATE_SYS_PWR_REG 0x11A4
+#define EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG 0x11B0
+#define EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG 0x11B4
+#define EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200
+#define EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG 0x1204
+#define EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG 0x1208
+#define EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG 0x1218
+#define EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220
+#define EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG 0x1224
+#define EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG 0x1228
+#define EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG 0x122C
+#define EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230
+#define EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234
+#define EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG 0x1238
+#define EXYNOS3_PAD_ISOLATION_SYS_PWR_REG 0x1240
+#define EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG 0x1260
+#define EXYNOS3_XUSBXTI_SYS_PWR_REG 0x1280
+#define EXYNOS3_XXTI_SYS_PWR_REG 0x1284
+#define EXYNOS3_EXT_REGULATOR_SYS_PWR_REG 0x12C0
+#define EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG 0x12C4
+#define EXYNOS3_GPIO_MODE_SYS_PWR_REG 0x1300
+#define EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG 0x1340
+#define EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG 0x1344
+#define EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG 0x1348
+#define EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG 0x1350
+#define EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG 0x1354
+#define EXYNOS3_CAM_SYS_PWR_REG 0x1380
+#define EXYNOS3_MFC_SYS_PWR_REG 0x1388
+#define EXYNOS3_G3D_SYS_PWR_REG 0x138C
+#define EXYNOS3_LCD0_SYS_PWR_REG 0x1390
+#define EXYNOS3_ISP_SYS_PWR_REG 0x1394
+#define EXYNOS3_MAUDIO_SYS_PWR_REG 0x1398
+#define EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG 0x13B0
+#define EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG 0x13B4
+#define EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG 0x13B8
+#define EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG 0x13C0
+#define EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG 0x13C4
+#define EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG 0x13C8
+
+#define EXYNOS3_ARM_CORE0_OPTION 0x2008
+#define EXYNOS3_ARM_CORE_OPTION(_nr) (EXYNOS3_ARM_CORE0_OPTION + ((_nr) * 0x80))
+
+#define EXYNOS3_ARM_COMMON_OPTION 0x2408
+#define EXYNOS3_TOP_PWR_OPTION 0x2C48
+#define EXYNOS3_CORE_TOP_PWR_OPTION 0x2CA8
+#define EXYNOS3_XUSBXTI_DURATION 0x341C
+#define EXYNOS3_XXTI_DURATION 0x343C
+#define EXYNOS3_EXT_REGULATOR_DURATION 0x361C
+#define EXYNOS3_EXT_REGULATOR_COREBLK_DURATION 0x363C
+
+/* for XXX_OPTION */
+#define EXYNOS3_OPTION_USE_SC_COUNTER (1 << 0)
+#define EXYNOS3_OPTION_USE_SC_FEEDBACK (1 << 1)
+#define EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN (1 << 7)
+
/* For EXYNOS5 */

#define EXYNOS5_AUTO_WDTRESET_DISABLE 0x0408
--
1.8.2.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Markus Pargmann: "Re: [PATCH 1/5] regulator: Add ena_gpio_valid config"
Previous message: Johan Hovold: "Re: [PATCH 2/6] mfd: rtsx_usb: fix platform device-id collision"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]