Re: [PATCHv2 2/3] gpio: sch: Add support for Intel Quark X1000 SoC

From: Andy Shevchenko
Date: Tue Oct 07 2014 - 09:43:08 EST


On Fri, Sep 26, 2014 at 1:07 PM, Chang Rebecca Swee Fun
<rebecca.swee.fun.chang@xxxxxxxxx> wrote:
> Intel Quark X1000 provides a total of 16 GPIOs. The GPIOs are split between
> the legacy I/O bridge and the GPIO controller.
>
> GPIO-SCH is the GPIO pins on legacy bridge for Intel Quark SoC.
> Intel Quark X1000 has 2 GPIOs powered by the core power well and 6 from
> the suspend power well.
>
> This piece of work is derived from Dan O'Donovan's initial work for Quark
> X1000 enabling.
>
> Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@xxxxxxxxx>
> ---
> drivers/gpio/Kconfig | 11 +++++++++--
> drivers/gpio/gpio-sch.c | 6 ++++++
> 2 files changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 690904a..64683a9 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -356,25 +356,32 @@ config GPIO_VR41XX
> Say yes here to support the NEC VR4100 series General-purpose I/O Uint
>
> config GPIO_SCH
> - tristate "Intel SCH/TunnelCreek/Centerton GPIO"
> + tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"

Do we need 'X1000' here right now?

> depends on PCI && X86
> select MFD_CORE
> select LPC_SCH
> help
> Say yes here to support GPIO interface on Intel Poulsbo SCH,
> - Intel Tunnel Creek processor or Intel Centerton processor.
> + Intel Tunnel Creek processor, Intel Centerton processor or

I think you may use comma before 'or' word.

> + Intel Quark X1000 SoC.
> +
> The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
> powered by the core power rail and are turned off during sleep
> modes (S3 and higher). The remaining four GPIOs are powered by
> the Intel SCH suspend power supply. These GPIOs remain
> active during S3. The suspend powered GPIOs can be used to wake the
> system from the Suspend-to-RAM state.
> +
> The Intel Tunnel Creek processor has 5 GPIOs powered by the
> core power rail and 9 from suspend power supply.
> +
> The Intel Centerton processor has a total of 30 GPIO pins.
> Twenty-one are powered by the core power rail and 9 from the
> suspend power supply.
>
> + The Intel Quark X1000 SoC has 2 GPIOs powered by the core
> + power well and 6 from the suspend power well.
> +
> config GPIO_ICH
> tristate "Intel ICH GPIO"
> depends on PCI && X86
> diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
> index 6e89be9..952990f 100644
> --- a/drivers/gpio/gpio-sch.c
> +++ b/drivers/gpio/gpio-sch.c
> @@ -241,6 +241,12 @@ static int sch_gpio_probe(struct platform_device *pdev)
> sch->chip.ngpio = 30;
> break;
>
> + case PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB:
> + sch->core_base = 0;
> + sch->resume_base = 2;
> + sch->chip.ngpio = 8;
> + break;
> +
> default:
> return -ENODEV;
> }
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/



--
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/