Re: [PATCH 2/2] ARM: dts: enable init rate for clock

From: Heiko Stübner
Date: Tue Oct 07 2014 - 14:28:23 EST


Am Dienstag, 7. Oktober 2014, 10:03:19 schrieb Doug Anderson:
> Kever,
>
> On Tue, Oct 7, 2014 at 2:33 AM, Kever Yang <kever.yang@xxxxxxxxxxxxxx>
wrote:
> > We need to initialize PLL rate and some of bus clock rate while
> > kernel init, for there is no other module will do that.
> >
> > Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
> > ---
> >
> > arch/arm/boot/dts/rk3288.dtsi | 10 ++++++++++
> > 1 file changed, 10 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> > index 874e66d..2f4519b 100644
> > --- a/arch/arm/boot/dts/rk3288.dtsi
> > +++ b/arch/arm/boot/dts/rk3288.dtsi
> > @@ -455,6 +455,16 @@
> >
> > rockchip,grf = <&grf>;
> > #clock-cells = <1>;
> > #reset-cells = <1>;
> >
> > + assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>,
> > + <&cru PLL_NPLL>, <&cru ACLK_CPU>,
> > + <&cru HCLK_CPU>, <&cru PCLK_CPU>,
> > + <&cru ACLK_PERI>, <&cru HCLK_PERI>,
> > + <&cru PCLK_PERI>;
> > + assigned-clock-rates = <594000000>, <400000000>,
> > + <500000000>, <300000000>,
>
> When I boot up, I see that ACLK_CPU was 297000000. You specified
> 300000000. Did you expect to get 300? If you expected 297, I think
> you should put 297. If you expected 300 then we have some debugging
> to do. Note: I'm not quite sure how you'd expect to get 300 given
> that none of the PLLs divide evenly to 300...

I'd think 300 is simply the target value. I.e. take the closest rate <= 300
MHz, same for 150 etc. I somehow like the approach of specifying what the rate
_should_ ideally be :-) .

Also reduces the amount of thougths necessary (and possible head-scratching)
when adapting the pll rates to some other constraints (child-clocks already
have the target rates and cannot drop to some even stranger value).


Heiko


>
> > + <150000000>, <75000000>,
>
> Similarly, I see 148500000, 74250000
>
> > + <300000000>, <150000000>,
>
> 297000000, 148500000
>
> > + <75000000>;
>
> 74250000
>
> > };
> >
> > grf: syscon@ff770000 {
> >
> > --
> > 1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/