[PATCH] serial: 8250_dw: Add DMA support for non-ACPI platforms

[Ray Jui]

The dma pointer under struct uart_8250_port is currently left
unassigned for non-ACPI platforms. It should be pointing to the dma
member in struct dw8250_data like how it was done for ACPI, so the core
8250 code will try to request for DMA when registering the port

If DMA is not enabled in device tree, request DMA will fail and the
driver will fall back to PIO

Signed-off-by: Ray Jui <rjui@xxxxxxxxxxxx>
Reviewed-by: JD (Jiandong) Zheng <jdzheng@xxxxxxxxxxxx>
Reviewed-by: Scott Branden <sbranden@xxxxxxxxxxxx>
Tested-by: Scott Branden <sbranden@xxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_dw.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 4db7987..1038ea8 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -293,6 +293,14 @@ static int dw8250_probe_of(struct uart_port *p,
 	if (has_ucv)
 		dw8250_setup_port(up);
 
+	/* if we have a valid fifosize, try hooking up DMA here */
+	if (p->fifosize) {
+		up->dma = &data->dma;
+
+		up->dma->rxconf.src_maxburst = p->fifosize / 4;
+		up->dma->txconf.dst_maxburst = p->fifosize / 4;
+	}
+
 	if (!of_property_read_u32(np, "reg-shift", &val))
 		p->regshift = val;
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/