Re: linux-next: Tree for Oct 8 (media/usb/gspca)

[Mauro Carvalho Chehab]

Em Wed, 08 Oct 2014 10:13:39 -0700
Randy Dunlap <rdunlap@xxxxxxxxxxxxx> escreveu:

> On 10/07/14 23:49, Stephen Rothwell wrote:
> > Hi all,
> > 
> > Please do not add any material intended for v3.19 to you linux-next
> > included trees until after v3.18-rc1 has been released.
> > 
> > Changes since 20141007:
> > 
> 
> I saw these build errors in gspca when CONFIG_INPUT=m but the gspca
> sub-drivers are builtin:
> 
> drivers/built-in.o: In function `gspca_dev_probe2':
> (.text+0x10ef43): undefined reference to `input_allocate_device'
> drivers/built-in.o: In function `gspca_dev_probe2':
> (.text+0x10efdd): undefined reference to `input_register_device'
> drivers/built-in.o: In function `gspca_dev_probe2':
> (.text+0x10f002): undefined reference to `input_free_device'
> drivers/built-in.o: In function `gspca_dev_probe2':
> (.text+0x10f0ac): undefined reference to `input_unregister_device'
> drivers/built-in.o: In function `gspca_disconnect':
> (.text+0x10f186): undefined reference to `input_unregister_device'
> drivers/built-in.o: In function `sd_int_pkt_scan':
> se401.c:(.text+0x11373d): undefined reference to `input_event'
> se401.c:(.text+0x11374e): undefined reference to `input_event'
> drivers/built-in.o: In function `sd_pkt_scan':
> t613.c:(.text+0x119f0e): undefined reference to `input_event'
> t613.c:(.text+0x119f1f): undefined reference to `input_event'
> drivers/built-in.o: In function `sd_stopN':
> t613.c:(.text+0x11a047): undefined reference to `input_event'
> drivers/built-in.o:t613.c:(.text+0x11a058): more undefined references to `input_event' follow
> 
> These could be fixed in Kconfig by something like (for each sub-driver that tests
> CONFIG_INPUT):
> 
> 	depends on INPUT || INPUT=n
> 
> Do you have another preference for fixing this?

Hmm... The code at the gspca subdrivers looks like:

#if IS_ENABLED(CONFIG_INPUT)
		if (data[0] & 0x20) {
			input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);
			input_sync(gspca_dev->input_dev);
			input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
			input_sync(gspca_dev->input_dev);
		}
#endif

As we never got any report about such bug, and this is there for a long
time, I suspect that maybe the IS_ENABLED() macro had some changes on
its behavior. So, IMHO, we should first check if something changed there.

>From gpsca's PoV, IMHO, it should be fine to disable the webcam buttons if
the webcam was compiled as builtin and the input subsystem is compiled as 
module. The core feature expected on a camera is to capture streams. 
Buttons are just a plus.

Also, most cams don't even have buttons. The gspca subdriver has support 
for buttons for the few models that have it.

So, IMHO, it should be ok to have GSPCA=y and INPUT=m, provided that 
the buttons will be disabled.

Regards,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/