[PATCH 2/2] ARM: tegra: jetson-tk1: add GK20A GPU DT node

[Alexandre Courbot]

Add the device-tree node for the GK20A GPU and leave it disabled by
default. It is the responsability of the bootloader to enable it if the
VPR registers have been programmed such as the GPU can operate.

Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
---
 arch/arm/boot/dts/tegra124-jetson-tk1.dts | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 029c9a021541..6f84c7e231a0 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -50,6 +50,12 @@
 		};
 	};
 
+	gpu@0,57000000 {
+		status = "disabled";
+
+		vdd-supply = <&vdd_gpu>;
+	};
+
 	pinmux: pinmux@0,70000868 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
@@ -1560,7 +1566,7 @@
 					regulator-always-on;
 				};
 
-				sd6 {
+				vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
-- 
2.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/