[PATCH] pcmcia: Convert dev_printk to dev_<level>
From: Joe Perches
Date: Fri Oct 10 2014 - 12:13:02 EST
Reduce object size a little by using dev_<level>
calls instead of dev_printk(KERN_<LEVEL>.
Other miscellanea:
o Coalesce formats
o Realign arguments
o Use pr_cont instead of naked printk
reorder test to use "%s\n"
Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/char/pcmcia/cm4040_cs.c | 5 ++-
drivers/pcmcia/cistpl.c | 10 +++---
drivers/pcmcia/cs.c | 29 +++++++--------
drivers/pcmcia/ds.c | 39 +++++++++-----------
drivers/pcmcia/pcmcia_cis.c | 4 +--
drivers/pcmcia/pcmcia_resource.c | 11 +++---
drivers/pcmcia/rsrc_nonstatic.c | 44 +++++++++++------------
drivers/pcmcia/ti113x.h | 78 +++++++++++++++++++---------------------
drivers/pcmcia/yenta_socket.c | 61 +++++++++++++++----------------
9 files changed, 126 insertions(+), 155 deletions(-)
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 8dd48a2..fc061f7 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -532,9 +532,8 @@ static int reader_config(struct pcmcia_device *link, int devno)
fail_rc = pcmcia_enable_device(link);
if (fail_rc != 0) {
- dev_printk(KERN_INFO, &link->dev,
- "pcmcia_enable_device failed 0x%x\n",
- fail_rc);
+ dev_info(&link->dev, "pcmcia_enable_device failed 0x%x\n",
+ fail_rc);
goto cs_release;
}
diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index 884a984..8641bff 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -94,8 +94,7 @@ static void __iomem *set_cis_map(struct pcmcia_socket *s,
mem->res = pcmcia_find_mem_region(0, s->map_size,
s->map_size, 0, s);
if (mem->res == NULL) {
- dev_printk(KERN_NOTICE, &s->dev,
- "cs: unable to map card memory!\n");
+ dev_notice(&s->dev, "cs: unable to map card memory!\n");
return NULL;
}
s->cis_virt = NULL;
@@ -378,8 +377,7 @@ int verify_cis_cache(struct pcmcia_socket *s)
buf = kmalloc(256, GFP_KERNEL);
if (buf == NULL) {
- dev_printk(KERN_WARNING, &s->dev,
- "no memory for verifying CIS\n");
+ dev_warn(&s->dev, "no memory for verifying CIS\n");
return -ENOMEM;
}
mutex_lock(&s->ops_mutex);
@@ -411,14 +409,14 @@ int pcmcia_replace_cis(struct pcmcia_socket *s,
const u8 *data, const size_t len)
{
if (len > CISTPL_MAX_CIS_SIZE) {
- dev_printk(KERN_WARNING, &s->dev, "replacement CIS too big\n");
+ dev_warn(&s->dev, "replacement CIS too big\n");
return -EINVAL;
}
mutex_lock(&s->ops_mutex);
kfree(s->fake_cis);
s->fake_cis = kmalloc(len, GFP_KERNEL);
if (s->fake_cis == NULL) {
- dev_printk(KERN_WARNING, &s->dev, "no memory to replace CIS\n");
+ dev_warn(&s->dev, "no memory to replace CIS\n");
mutex_unlock(&s->ops_mutex);
return -ENOMEM;
}
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index 5292db6..8007bfd 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -177,8 +177,8 @@ int pcmcia_register_socket(struct pcmcia_socket *socket)
wait_for_completion(&socket->thread_done);
if (!socket->thread) {
- dev_printk(KERN_WARNING, &socket->dev,
- "PCMCIA: warning: socket thread did not start\n");
+ dev_warn(&socket->dev,
+ "PCMCIA: warning: socket thread did not start\n");
return -EIO;
}
@@ -275,7 +275,7 @@ static int socket_reset(struct pcmcia_socket *skt)
msleep(unreset_check * 10);
}
- dev_printk(KERN_ERR, &skt->dev, "time out after reset.\n");
+ dev_err(&skt->dev, "time out after reset\n");
return -ETIMEDOUT;
}
@@ -325,8 +325,8 @@ static void socket_shutdown(struct pcmcia_socket *s)
s->ops->get_status(s, &status);
if (status & SS_POWERON) {
- dev_printk(KERN_ERR, &s->dev,
- "*** DANGER *** unable to remove socket power\n");
+ dev_err(&s->dev,
+ "*** DANGER *** unable to remove socket power\n");
}
s->state &= ~SOCKET_INUSE;
@@ -356,15 +356,13 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
}
if (status & SS_PENDING) {
- dev_printk(KERN_ERR, &skt->dev,
- "voltage interrogation timed out.\n");
+ dev_err(&skt->dev, "voltage interrogation timed out\n");
return -ETIMEDOUT;
}
if (status & SS_CARDBUS) {
if (!(skt->features & SS_CAP_CARDBUS)) {
- dev_printk(KERN_ERR, &skt->dev,
- "cardbus cards are not supported.\n");
+ dev_err(&skt->dev, "cardbus cards are not supported\n");
return -EINVAL;
}
skt->state |= SOCKET_CARDBUS;
@@ -379,7 +377,7 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
else if (!(status & SS_XVCARD))
skt->socket.Vcc = skt->socket.Vpp = 50;
else {
- dev_printk(KERN_ERR, &skt->dev, "unsupported voltage key.\n");
+ dev_err(&skt->dev, "unsupported voltage key\n");
return -EIO;
}
@@ -396,7 +394,7 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
skt->ops->get_status(skt, &status);
if (!(status & SS_POWERON)) {
- dev_printk(KERN_ERR, &skt->dev, "unable to apply power.\n");
+ dev_err(&skt->dev, "unable to apply power\n");
return -EIO;
}
@@ -429,8 +427,7 @@ static int socket_insert(struct pcmcia_socket *skt)
if (ret == 0) {
skt->state |= SOCKET_PRESENT;
- dev_printk(KERN_NOTICE, &skt->dev,
- "pccard: %s card inserted into slot %d\n",
+ dev_notice(&skt->dev, "pccard: %s card inserted into slot %d\n",
(skt->state & SOCKET_CARDBUS) ? "CardBus" : "PCMCIA",
skt->sock);
@@ -558,8 +555,7 @@ static int socket_resume(struct pcmcia_socket *skt)
static void socket_remove(struct pcmcia_socket *skt)
{
- dev_printk(KERN_NOTICE, &skt->dev,
- "pccard: card ejected from slot %d\n", skt->sock);
+ dev_notice(&skt->dev, "pccard: card ejected from slot %d\n", skt->sock);
socket_shutdown(skt);
}
@@ -605,8 +601,7 @@ static int pccardd(void *__skt)
/* register with the device core */
ret = device_register(&skt->dev);
if (ret) {
- dev_printk(KERN_WARNING, &skt->dev,
- "PCMCIA: unable to register socket\n");
+ dev_warn(&skt->dev, "PCMCIA: unable to register socket\n");
skt->thread = NULL;
complete(&skt->thread_done);
return 0;
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 757119b..1f788d6 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -284,8 +284,8 @@ static int pcmcia_device_probe(struct device *dev)
dev_dbg(dev, "base %x, regs %x", p_dev->config_base,
p_dev->config_regs);
} else {
- dev_printk(KERN_INFO, dev,
- "pcmcia: could not parse base and rmask0 of CIS\n");
+ dev_info(dev,
+ "pcmcia: could not parse base and rmask0 of CIS\n");
p_dev->config_base = 0;
p_dev->config_regs = 0;
}
@@ -382,15 +382,15 @@ static int pcmcia_device_remove(struct device *dev)
/* check for proper unloading */
if (p_dev->_irq || p_dev->_io || p_dev->_locked)
- dev_printk(KERN_INFO, dev,
- "pcmcia: driver %s did not release config properly\n",
- p_drv->name);
+ dev_info(dev,
+ "pcmcia: driver %s did not release config properly\n",
+ p_drv->name);
for (i = 0; i < MAX_WIN; i++)
if (p_dev->_win & CLIENT_WIN_REQ(i))
- dev_printk(KERN_INFO, dev,
- "pcmcia: driver %s did not release window properly\n",
- p_drv->name);
+ dev_info(dev,
+ "pcmcia: driver %s did not release window properly\n",
+ p_drv->name);
/* references from pcmcia_probe_device */
pcmcia_put_dev(p_dev);
@@ -578,8 +578,7 @@ static struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s,
mutex_unlock(&s->ops_mutex);
- dev_printk(KERN_NOTICE, &p_dev->dev,
- "pcmcia: registering new device %s (IRQ: %d)\n",
+ dev_notice(&p_dev->dev, "pcmcia: registering new device %s (IRQ: %d)\n",
p_dev->devname, p_dev->irq);
pcmcia_device_query(p_dev);
@@ -742,16 +741,14 @@ static int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename)
if (request_firmware(&fw, filename, &dev->dev) == 0) {
if (fw->size >= CISTPL_MAX_CIS_SIZE) {
ret = -EINVAL;
- dev_printk(KERN_ERR, &dev->dev,
- "pcmcia: CIS override is too big\n");
+ dev_err(&dev->dev, "pcmcia: CIS override is too big\n");
goto release;
}
if (!pcmcia_replace_cis(s, fw->data, fw->size))
ret = 0;
else {
- dev_printk(KERN_ERR, &dev->dev,
- "pcmcia: CIS override failed\n");
+ dev_err(&dev->dev, "pcmcia: CIS override failed\n");
goto release;
}
@@ -1145,10 +1142,9 @@ static int pcmcia_dev_suspend(struct device *dev, pm_message_t state)
if (p_drv->suspend) {
ret = p_drv->suspend(p_dev);
if (ret) {
- dev_printk(KERN_ERR, dev,
- "pcmcia: device %s (driver %s) did "
- "not want to go to sleep (%d)\n",
- p_dev->devname, p_drv->name, ret);
+ dev_err(dev,
+ "pcmcia: device %s (driver %s) did not want to go to sleep (%d)\n",
+ p_dev->devname, p_drv->name, ret);
mutex_lock(&p_dev->socket->ops_mutex);
p_dev->suspended = 0;
mutex_unlock(&p_dev->socket->ops_mutex);
@@ -1339,14 +1335,13 @@ static int pcmcia_bus_add_socket(struct device *dev,
socket = pcmcia_get_socket(socket);
if (!socket) {
- dev_printk(KERN_ERR, dev,
- "PCMCIA obtaining reference to socket failed\n");
+ dev_err(dev, "PCMCIA obtaining reference to socket failed\n");
return -ENODEV;
}
ret = sysfs_create_bin_file(&dev->kobj, &pccard_cis_attr);
if (ret) {
- dev_printk(KERN_ERR, dev, "PCMCIA registration failed\n");
+ dev_err(dev, "PCMCIA registration failed\n");
pcmcia_put_socket(socket);
return ret;
}
@@ -1358,7 +1353,7 @@ static int pcmcia_bus_add_socket(struct device *dev,
ret = pccard_register_pcmcia(socket, &pcmcia_bus_callback);
if (ret) {
- dev_printk(KERN_ERR, dev, "PCMCIA registration failed\n");
+ dev_err(dev, "PCMCIA registration failed\n");
pcmcia_put_socket(socket);
return ret;
}
diff --git a/drivers/pcmcia/pcmcia_cis.c b/drivers/pcmcia/pcmcia_cis.c
index e2c9241..1c05d74 100644
--- a/drivers/pcmcia/pcmcia_cis.c
+++ b/drivers/pcmcia/pcmcia_cis.c
@@ -44,7 +44,7 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function,
buf = kmalloc(256, GFP_KERNEL);
if (buf == NULL) {
- dev_printk(KERN_WARNING, &s->dev, "no memory to read tuple\n");
+ dev_warn(&s->dev, "no memory to read tuple\n");
return -ENOMEM;
}
tuple.DesiredTuple = code;
@@ -94,7 +94,7 @@ int pccard_loop_tuple(struct pcmcia_socket *s, unsigned int function,
buf = kzalloc(256, GFP_KERNEL);
if (buf == NULL) {
- dev_printk(KERN_WARNING, &s->dev, "no memory to read tuple\n");
+ dev_warn(&s->dev, "no memory to read tuple\n");
return -ENOMEM;
}
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index e8c19de..34aad89 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -508,8 +508,7 @@ int pcmcia_enable_device(struct pcmcia_device *p_dev)
s->socket.Vpp = p_dev->vpp;
if (s->ops->set_socket(s, &s->socket)) {
mutex_unlock(&s->ops_mutex);
- dev_printk(KERN_WARNING, &p_dev->dev,
- "Unable to set socket state\n");
+ dev_warn(&p_dev->dev, "Unable to set socket state\n");
return -EINVAL;
}
@@ -736,13 +735,11 @@ __pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev,
ret = request_irq(p_dev->irq, handler, 0, p_dev->devname, p_dev->priv);
if (ret) {
ret = pcmcia_request_irq(p_dev, handler);
- dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: "
- "request for exclusive IRQ could not be fulfilled.\n");
- dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: the driver "
- "needs updating to supported shared IRQ lines.\n");
+ dev_warn(&p_dev->dev, "pcmcia: request for exclusive IRQ could not be fulfilled\n");
+ dev_warn(&p_dev->dev, "pcmcia: the driver needs updating to supported shared IRQ lines\n");
}
if (ret)
- dev_printk(KERN_INFO, &p_dev->dev, "request_irq() failed\n");
+ dev_info(&p_dev->dev, "request_irq() failed\n");
else
p_dev->_irq = 1;
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 065704c..5ef7b46 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -191,15 +191,13 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base,
int any;
u_char *b, hole, most;
- dev_printk(KERN_INFO, &s->dev, "cs: IO port probe %#x-%#x:",
- base, base+num-1);
+ dev_info(&s->dev, "cs: IO port probe %#x-%#x:", base, base+num-1);
/* First, what does a floating port look like? */
b = kzalloc(256, GFP_KERNEL);
if (!b) {
- printk("\n");
- dev_printk(KERN_ERR, &s->dev,
- "do_io_probe: unable to kmalloc 256 bytes");
+ pr_cont("\n");
+ dev_err(&s->dev, "do_io_probe: unable to kmalloc 256 bytes\n");
return;
}
for (i = base, most = 0; i < base+num; i += 8) {
@@ -223,7 +221,7 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base,
res = claim_region(s, i, 8, IORESOURCE_IO, "PCMCIA ioprobe");
if (!res) {
if (!any)
- printk(" excluding");
+ pr_cont(" excluding");
if (!bad)
bad = any = i;
continue;
@@ -234,13 +232,13 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base,
free_region(res);
if (j < 8) {
if (!any)
- printk(" excluding");
+ pr_cont(" excluding");
if (!bad)
bad = any = i;
} else {
if (bad) {
sub_interval(&s_data->io_db, bad, i-bad);
- printk(" %#x-%#x", bad, i-1);
+ pr_cont(" %#x-%#x", bad, i-1);
bad = 0;
}
}
@@ -248,15 +246,15 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base,
if (bad) {
if ((num > 16) && (bad == base) && (i == base+num)) {
sub_interval(&s_data->io_db, bad, i-bad);
- printk(" nothing: probe failed.\n");
+ pr_cont(" nothing: probe failed.\n");
return;
} else {
sub_interval(&s_data->io_db, bad, i-bad);
- printk(" %#x-%#x", bad, i-1);
+ pr_cont(" %#x-%#x", bad, i-1);
}
}
- printk(any ? "\n" : " clean.\n");
+ pr_cont("%s\n", !any ? " clean" : "");
}
#endif
@@ -413,8 +411,8 @@ static int do_mem_probe(struct pcmcia_socket *s, u_long base, u_long num,
struct socket_data *s_data = s->resource_data;
u_long i, j, bad, fail, step;
- dev_printk(KERN_INFO, &s->dev, "cs: memory probe 0x%06lx-0x%06lx:",
- base, base+num-1);
+ dev_info(&s->dev, "cs: memory probe 0x%06lx-0x%06lx:",
+ base, base+num-1);
bad = fail = 0;
step = (num < 0x20000) ? 0x2000 : ((num>>4) & ~0x1fff);
/* don't allow too large steps */
@@ -438,13 +436,13 @@ static int do_mem_probe(struct pcmcia_socket *s, u_long base, u_long num,
}
if (i != j) {
if (!bad)
- printk(" excluding");
- printk(" %#05lx-%#05lx", i, j-1);
+ pr_cont(" excluding");
+ pr_cont(" %#05lx-%#05lx", i, j-1);
sub_interval(&s_data->mem_db, i, j-i);
bad += j-i;
}
}
- printk(bad ? "\n" : " clean.\n");
+ pr_cont("%s\n", !bad ? " clean" : "");
return num - bad;
}
@@ -495,7 +493,7 @@ static int validate_mem(struct pcmcia_socket *s, unsigned int probe_mask)
return 0;
if (s_data->mem_db_valid.next != &s_data->mem_db_valid)
return 0;
- dev_printk(KERN_NOTICE, &s->dev,
+ dev_notice(&s->dev,
"cs: warning: no high memory space available!\n");
return -ENODEV;
}
@@ -975,9 +973,9 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s)
if (res == &ioport_resource)
continue;
- dev_printk(KERN_INFO, &s->cb_dev->dev,
- "pcmcia: parent PCI bridge window: %pR\n",
- res);
+ dev_info(&s->cb_dev->dev,
+ "pcmcia: parent PCI bridge window: %pR\n",
+ res);
if (!adjust_io(s, ADD_MANAGED_RESOURCE, res->start, res->end))
done |= IORESOURCE_IO;
@@ -990,9 +988,9 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s)
if (res == &iomem_resource)
continue;
- dev_printk(KERN_INFO, &s->cb_dev->dev,
- "pcmcia: parent PCI bridge window: %pR\n",
- res);
+ dev_info(&s->cb_dev->dev,
+ "pcmcia: parent PCI bridge window: %pR\n",
+ res);
if (!adjust_memory(s, ADD_MANAGED_RESOURCE, res->start, res->end))
done |= IORESOURCE_MEM;
}
diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h
index a717894..5cb670e 100644
--- a/drivers/pcmcia/ti113x.h
+++ b/drivers/pcmcia/ti113x.h
@@ -372,8 +372,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
- dev_printk(KERN_INFO, &socket->dev->dev,
- "TI: mfunc 0x%08x, devctl 0x%02x\n", mfunc, devctl);
+ dev_info(&socket->dev->dev, "TI: mfunc 0x%08x, devctl 0x%02x\n",
+ mfunc, devctl);
/* make sure PCI interrupts are enabled before probing */
ti_init(socket);
@@ -387,8 +387,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
* We're here which means PCI interrupts are _not_ delivered. try to
* find the right setting (all serial or parallel)
*/
- dev_printk(KERN_INFO, &socket->dev->dev,
- "TI: probing PCI interrupt failed, trying to fix\n");
+ dev_info(&socket->dev->dev,
+ "TI: probing PCI interrupt failed, trying to fix\n");
/* for serial PCI make sure MFUNC3 is set to IRQSER */
if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
@@ -412,8 +412,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- dev_printk(KERN_INFO, &socket->dev->dev,
- "TI: all-serial interrupts ok\n");
+ dev_info(&socket->dev->dev,
+ "TI: all-serial interrupts ok\n");
mfunc_old = mfunc;
goto out;
}
@@ -428,8 +428,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
}
/* serial PCI interrupts not working fall back to parallel */
- dev_printk(KERN_INFO, &socket->dev->dev,
- "TI: falling back to parallel PCI interrupts\n");
+ dev_info(&socket->dev->dev,
+ "TI: falling back to parallel PCI interrupts\n");
devctl &= ~TI113X_DCR_IMODE_MASK;
devctl |= TI113X_DCR_IMODE_SERIAL; /* serial ISA could be right */
config_writeb(socket, TI113X_DEVICE_CONTROL, devctl);
@@ -460,8 +460,7 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
mfunc_old = mfunc;
- dev_printk(KERN_INFO, &socket->dev->dev,
- "TI: parallel PCI interrupts ok\n");
+ dev_info(&socket->dev->dev, "TI: parallel PCI interrupts ok\n");
} else {
/* not working, back to old value */
mfunc = mfunc_old;
@@ -473,9 +472,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
out:
if (pci_irq_status < 1) {
socket->cb_irq = 0;
- dev_printk(KERN_INFO, &socket->dev->dev,
- "Yenta TI: no PCI interrupts. Fish. "
- "Please report.\n");
+ dev_info(&socket->dev->dev,
+ "Yenta TI: no PCI interrupts. Fish. Please report.\n");
}
}
@@ -547,9 +545,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
- dev_printk(KERN_INFO, &socket->dev->dev,
- "TI: mfunc 0x%08x, devctl 0x%02x\n",
- mfunc, devctl);
+ dev_info(&socket->dev->dev, "TI: mfunc 0x%08x, devctl 0x%02x\n",
+ mfunc, devctl);
/* if IRQs are configured as tied, align irq of func1 with func0 */
sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
@@ -568,8 +565,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
* We're here which means PCI interrupts are _not_ delivered. try to
* find the right setting
*/
- dev_printk(KERN_INFO, &socket->dev->dev,
- "TI: probing PCI interrupt failed, trying to fix\n");
+ dev_info(&socket->dev->dev,
+ "TI: probing PCI interrupt failed, trying to fix\n");
/* if all serial: set INTRTIE, probe again */
if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
@@ -578,8 +575,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
if (ti12xx_tie_interrupts(socket, &old_irq)) {
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- dev_printk(KERN_INFO, &socket->dev->dev,
- "TI: all-serial interrupts, tied ok\n");
+ dev_info(&socket->dev->dev,
+ "TI: all-serial interrupts, tied ok\n");
goto out;
}
@@ -616,8 +613,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- dev_printk(KERN_INFO, &socket->dev->dev,
- "TI: parallel PCI interrupts ok\n");
+ dev_info(&socket->dev->dev,
+ "TI: parallel PCI interrupts ok\n");
goto out;
}
@@ -632,8 +629,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
if (ti12xx_tie_interrupts(socket, &old_irq)) {
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- dev_printk(KERN_INFO, &socket->dev->dev,
- "TI: parallel PCI interrupts, tied ok\n");
+ dev_info(&socket->dev->dev,
+ "TI: parallel PCI interrupts, tied ok\n");
goto out;
}
@@ -644,8 +641,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
out:
if (pci_irq_status < 1) {
socket->cb_irq = 0;
- dev_printk(KERN_INFO, &socket->dev->dev,
- "TI: no PCI interrupts. Fish. Please report.\n");
+ dev_info(&socket->dev->dev,
+ "TI: no PCI interrupts. Fish. Please report.\n");
}
}
@@ -849,13 +846,12 @@ static int ti12xx_override(struct yenta_socket *socket)
/* make sure that memory burst is active */
val_orig = val = config_readl(socket, TI113X_SYSTEM_CONTROL);
if (disable_clkrun && PCI_FUNC(socket->dev->devfn) == 0) {
- dev_printk(KERN_INFO, &socket->dev->dev,
- "Disabling CLKRUN feature\n");
+ dev_info(&socket->dev->dev, "Disabling CLKRUN feature\n");
val |= TI113X_SCR_KEEPCLK;
}
if (!(val & TI122X_SCR_MRBURSTUP)) {
- dev_printk(KERN_INFO, &socket->dev->dev,
- "Enabling burst memory read transactions\n");
+ dev_info(&socket->dev->dev,
+ "Enabling burst memory read transactions\n");
val |= TI122X_SCR_MRBURSTUP;
}
if (val_orig != val)
@@ -866,12 +862,10 @@ static int ti12xx_override(struct yenta_socket *socket)
* CSC interrupts to PCI rather than INTVAL.
*/
val = config_readb(socket, TI1250_DIAGNOSTIC);
- dev_printk(KERN_INFO, &socket->dev->dev,
- "Using %s to route CSC interrupts to PCI\n",
- (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
- dev_printk(KERN_INFO, &socket->dev->dev,
- "Routing CardBus interrupts to %s\n",
- (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
+ dev_info(&socket->dev->dev, "Using %s to route CSC interrupts to PCI\n",
+ (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
+ dev_info(&socket->dev->dev, "Routing CardBus interrupts to %s\n",
+ (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
/* do irqrouting, depending on function */
if (PCI_FUNC(socket->dev->devfn) == 0)
@@ -896,9 +890,9 @@ static int ti1250_override(struct yenta_socket *socket)
diag |= TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ;
if (diag != old) {
- dev_printk(KERN_INFO, &socket->dev->dev,
- "adjusting diagnostic: %02x -> %02x\n",
- old, diag);
+ dev_info(&socket->dev->dev,
+ "adjusting diagnostic: %02x -> %02x\n",
+ old, diag);
config_writeb(socket, TI1250_DIAGNOSTIC, diag);
}
@@ -963,9 +957,9 @@ static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus)
/* default to clear TLTEnable bit, old behaviour */
test_c9 &= ~ENE_TEST_C9_TLTENABLE;
- dev_printk(KERN_INFO, &socket->dev->dev,
- "EnE: chaning testregister 0xC9, %02x -> %02x\n",
- old_c9, test_c9);
+ dev_info(&socket->dev->dev,
+ "EnE: changing testregister 0xC9, %02x -> %02x\n",
+ old_c9, test_c9);
config_writeb(socket, ENE_TEST_C9, test_c9);
}
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 8a23ccb..be04991 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -712,10 +712,9 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
pcibios_bus_to_resource(dev->bus, res, ®ion);
if (pci_claim_resource(dev, PCI_BRIDGE_RESOURCES + nr) == 0)
return 0;
- dev_printk(KERN_INFO, &dev->dev,
- "Preassigned resource %d busy or not available, "
- "reconfiguring...\n",
- nr);
+ dev_info(&dev->dev,
+ "Preassigned resource %d busy or not available, reconfiguring...\n",
+ nr);
}
if (type & IORESOURCE_IO) {
@@ -738,9 +737,9 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
return 1;
}
- dev_printk(KERN_INFO, &dev->dev,
- "no resource of type %x available, trying to continue...\n",
- type);
+ dev_info(&dev->dev,
+ "no resource of type %x available, trying to continue...\n",
+ type);
res->start = res->end = res->flags = 0;
return 0;
}
@@ -979,8 +978,8 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket)
socket->probe_status = 0;
if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) {
- dev_printk(KERN_WARNING, &socket->dev->dev,
- "request_irq() in yenta_probe_cb_irq() failed!\n");
+ dev_warn(&socket->dev->dev,
+ "request_irq() in yenta_probe_cb_irq() failed!\n");
return -1;
}
@@ -1019,9 +1018,8 @@ static void yenta_get_socket_capabilities(struct yenta_socket *socket, u32 isa_i
else
socket->socket.irq_mask = 0;
- dev_printk(KERN_INFO, &socket->dev->dev,
- "ISA IRQ mask 0x%04x, PCI irq %d\n",
- socket->socket.irq_mask, socket->cb_irq);
+ dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
+ socket->socket.irq_mask, socket->cb_irq);
}
/*
@@ -1111,9 +1109,9 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
/* Show that the wanted subordinate number is not possible: */
if (cardbus_bridge->busn_res.end > upper_limit)
- dev_printk(KERN_WARNING, &cardbus_bridge->dev,
- "Upper limit for fixing this "
- "bridge's parent bridge: #%02x\n", upper_limit);
+ dev_warn(&cardbus_bridge->dev,
+ "Upper limit for fixing this bridge's parent bridge: #%02x\n",
+ upper_limit);
/* If we have room to increase the bridge's subordinate number, */
if (bridge_to_fix->busn_res.end < upper_limit) {
@@ -1122,11 +1120,11 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
unsigned char subordinate_to_assign =
min_t(int, cardbus_bridge->busn_res.end, upper_limit);
- dev_printk(KERN_INFO, &bridge_to_fix->dev,
- "Raising subordinate bus# of parent "
- "bus (#%02x) from #%02x to #%02x\n",
- bridge_to_fix->number,
- (int)bridge_to_fix->busn_res.end, subordinate_to_assign);
+ dev_info(&bridge_to_fix->dev,
+ "Raising subordinate bus# of parent bus (#%02x) from #%02x to #%02x\n",
+ bridge_to_fix->number,
+ (int)bridge_to_fix->busn_res.end,
+ subordinate_to_assign);
/* Save the new subordinate in the bus struct of the bridge */
bridge_to_fix->busn_res.end = subordinate_to_assign;
@@ -1153,8 +1151,7 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
* Bail out if so.
*/
if (!dev->subordinate) {
- dev_printk(KERN_ERR, &dev->dev, "no bus associated! "
- "(try 'pci=assign-busses')\n");
+ dev_err(&dev->dev, "no bus associated! (try 'pci=assign-busses')\n");
return -ENODEV;
}
@@ -1189,7 +1186,7 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
goto disable;
if (!pci_resource_start(dev, 0)) {
- dev_printk(KERN_ERR, &dev->dev, "No cardbus resource!\n");
+ dev_err(&dev->dev, "No cardbus resource!\n");
ret = -ENODEV;
goto release;
}
@@ -1208,8 +1205,8 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
* report the subsystem vendor and device for help debugging
* the irq stuff...
*/
- dev_printk(KERN_INFO, &dev->dev, "CardBus bridge found [%04x:%04x]\n",
- dev->subsystem_vendor, dev->subsystem_device);
+ dev_info(&dev->dev, "CardBus bridge found [%04x:%04x]\n",
+ dev->subsystem_vendor, dev->subsystem_device);
yenta_config_init(socket);
@@ -1241,12 +1238,10 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
socket->poll_timer.data = (unsigned long)socket;
socket->poll_timer.expires = jiffies + HZ;
add_timer(&socket->poll_timer);
- dev_printk(KERN_INFO, &dev->dev,
- "no PCI IRQ, CardBus support disabled for this "
- "socket.\n");
- dev_printk(KERN_INFO, &dev->dev,
- "check your BIOS CardBus, BIOS IRQ or ACPI "
- "settings.\n");
+ dev_info(&dev->dev,
+ "no PCI IRQ, CardBus support disabled for this socket\n");
+ dev_info(&dev->dev,
+ "check your BIOS CardBus, BIOS IRQ or ACPI settings\n");
} else {
socket->socket.features |= SS_CAP_CARDBUS;
}
@@ -1254,8 +1249,8 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* Figure out what the dang thing can do for the PCMCIA layer... */
yenta_interrogate(socket);
yenta_get_socket_capabilities(socket, isa_interrupts);
- dev_printk(KERN_INFO, &dev->dev,
- "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+ dev_info(&dev->dev, "Socket status: %08x\n",
+ cb_readl(socket, CB_SOCKET_STATE));
yenta_fixup_parent_bridge(dev->subordinate);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/