RE: [PATCH 2/3] qe: run qe_init and qe_ic_init

[qiang.zhao@xxxxxxxxxxxxx]

On Sat, 2014-10-11 at 01:35AM, Wood Scott wrote:
> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Saturday, October 11, 2014 1:35 AM
> To: Zhao Qiang-B45475
> Cc: linuxppc-dev@xxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Wood
> Scott-B07421; Xie Xiaobo-R63061
> Subject: Re: [PATCH 2/3] qe: run qe_init and qe_ic_init
> 
> On Fri, 2014-10-10 at 14:48 +0800, Zhao Qiang wrote:
> > qe and qe_ic need to be initialized before the qe app drivers, using
> > subsys_initcall to run qe_init and qe_ic_init
> >
> > Signed-off-by: Zhao Qiang <B45475@xxxxxxxxxxxxx>
> > ---
> >  drivers/soc/qe/qe.c    | 15 +++++++++++++++
> >  drivers/soc/qe/qe_ic.c | 15 +++++++++++++++
> >  2 files changed, 30 insertions(+)
> >
> > diff --git a/drivers/soc/qe/qe.c b/drivers/soc/qe/qe.c index
> > 2aaa5b2..bfea0f8 100644
> > --- a/drivers/soc/qe/qe.c
> > +++ b/drivers/soc/qe/qe.c
> > @@ -683,6 +683,21 @@ unsigned int qe_get_num_of_snums(void)  }
> > EXPORT_SYMBOL(qe_get_num_of_snums);
> >
> > +static int __init qe_init(void)
> > +{
> > +	struct device_node *np;
> > +
> > +	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
> > +	if (!np) {
> > +		pr_err("%s: Could not find Quicc Engine node\n", __func__);
> > +		return -ENODEV;
> > +	}
> > +	qe_reset();
> > +	of_node_put(np);
> > +	return 0;
> > +}
> > +subsys_initcall(qe_init);
> 
> It is not an error to enable QE support on hardware that doesn't have QE.
> Please remove the pr_err().
OK, will be modified on V2.
> 
> > +
> >  #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx)  static int
> > qe_resume(struct platform_device *ofdev)  { diff --git
> > a/drivers/soc/qe/qe_ic.c b/drivers/soc/qe/qe_ic.c index
> > cc1b8d5..11fe98c 100644
> > --- a/drivers/soc/qe/qe_ic.c
> > +++ b/drivers/soc/qe/qe_ic.c
> > @@ -34,6 +34,7 @@
> >  #include <linux/fsl/qe_ic.h>
> >
> >  #include "qe_ic.h"
> > +#include "../../irqchip/irqchip.h"
> 
> What do you need from here, and can it be moved to include/linux/...?
> 
> The only thing I see defined in irqchip.h is IRQCHIP_DECLARE, and you
> don't use that in this patch...
OK, will be modified on V2.
> 
> -Scott
> 
> >  static DEFINE_RAW_SPINLOCK(qe_ic_lock);
> >
> > @@ -501,4 +502,18 @@ static int __init init_qe_ic_sysfs(void)
> >  	return 0;
> >  }
> >
> > +static int __init qeic_of_init(void)
> > +{
> > +	struct device_node *np;
> > +
> > +	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> > +	if (np) {
> > +		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
> > +			   qe_ic_cascade_high_mpic);
> > +		of_node_put(np);
> > +	}
> > +	return 0;
> > +}
> > +subsys_initcall(qeic_of_init);
> > +
> >  subsys_initcall(init_qe_ic_sysfs);
> 


Best Regards
Zhao Qiang