[PATCH v2] clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate

From: Jianqun
Date: Sun Oct 12 2014 - 20:46:45 EST


The relation of i2s nodes as follows:
i2s_src 1 1 594000000 0
i2s_frac 1 1 11289600 0
i2s_pre 1 1 11289600 0
sclk_i2s0 1 1 11289600 0
i2s0_clkout 0 0 11289600 0
hclk_i2s0 1 1 148500000 0

"sclk_i2s0" is the master clock, should allow to set its parent's rate.
Add flag CLK_SET_RATE_PARENT for "i2s_frac", "i2s_pre" and "sclk_i2s0".

Tested on rk3288 board using max98090, with command "aplay <music.wav>"
and cat /sys/kernel/debug/clk/clk_summary |grep i2s

Signed-off-by: Jianqun <jay.xu@xxxxxxxxxxxxxx>
---
change since v1:
- no "Change-Id"s in upstream patches, suggested by Heiko
- to limit i2s0_clkout to select between its two parent without being able
influence the core i2s clock, suggested by Heiko

drivers/clk/rockchip/clk-rk3288.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index b22a2d2..ae32d78 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -238,15 +238,15 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
COMPOSITE(0, "i2s_src", mux_pll_src_cpll_gpll_p, 0,
RK3288_CLKSEL_CON(4), 15, 1, MFLAGS, 0, 7, DFLAGS,
RK3288_CLKGATE_CON(4), 1, GFLAGS),
- COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", 0,
+ COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", CLK_SET_RATE_PARENT,
RK3288_CLKSEL_CON(8), 0,
RK3288_CLKGATE_CON(4), 2, GFLAGS),
- MUX(0, "i2s_pre", mux_i2s_pre_p, 0,
+ MUX(0, "i2s_pre", mux_i2s_pre_p, CLK_SET_RATE_PARENT,
RK3288_CLKSEL_CON(4), 8, 2, MFLAGS),
COMPOSITE_NODIV(0, "i2s0_clkout", mux_i2s_clkout_p, 0,
RK3288_CLKSEL_CON(4), 12, 1, MFLAGS,
RK3288_CLKGATE_CON(4), 0, GFLAGS),
- GATE(SCLK_I2S0, "sclk_i2s0", "i2s_pre", 0,
+ GATE(SCLK_I2S0, "sclk_i2s0", "i2s_pre", CLK_SET_RATE_PARENT,
RK3288_CLKGATE_CON(4), 3, GFLAGS),

MUX(0, "spdif_src", mux_pll_src_cpll_gpll_p, 0,
--
1.9.1


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/