[PATCH] serial: 8250_core: use pre-decrement for iteration limit

[Frans Klaver]

In serial8250_rx_chars(), max_count is set to 256. Due to the
post-decrement operator used in the while() condition, the maximum
number of iterations actually 257. This is not a problem, but it is
mildly surprising if you're debugging. Use pre-decrement instead.

Signed-off-by: Frans Klaver <frans.klaver@xxxxxxxxx>
---
 drivers/tty/serial/8250/8250_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index a06084d..cc9f1a8 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1485,7 +1485,7 @@ serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
 
 ignore_char:
 		lsr = serial_in(up, UART_LSR);
-	} while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
+	} while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (--max_count > 0));
 	spin_unlock(&port->lock);
 	tty_flip_buffer_push(&port->state->port);
 	spin_lock(&port->lock);
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/