Re: [PATCH 1/1] pci: reset all pci endpoints to stop on going dma
From: Li, ZhenHua
Date: Sun Oct 19 2014 - 22:06:21 EST
On 10/20/2014 09:46 AM, Li, ZhenHua wrote:
On 10/20/2014 07:20 AM, Gavin Shan wrote:
On Fri, Oct 17, 2014 at 02:44:43AM -0700, Eric W. Biederman wrote:
"Li, Zhen-Hua" <zhen-hual@xxxxxx> writes:
This is an update of the patch
https://lkml.org/lkml/2014/10/10/37
This patch is doing the reset works before the kdump kernel boots.
If I have said it once I have said it a thousand times.
Nacked-by: "Eric W. Biederman" <ebiederm@xxxxxxxxxxxx>
Nacked-by: "Eric W. Biederman" <ebiederm@xxxxxxxxxxxx>
Nacked-by: "Eric W. Biederman" <ebiederm@xxxxxxxxxxxx>
It is absolutely inappropriate to do this in the kernel that has
crashed.
Either reserve a chunk of the iommu for use by the crash dump kernel,
or figure out how to do this during boot up.
But this is absolutely and totally inappropriate to do in crash_kexec.
The failure modes are all wrong. It will impact the reliability of our
crash dumps.
If an the code for a linux architecture is not structured in such a way
as to make it easy or straight forward to do this my sympathies you are
going to have do fix that linux port to be able to do things during
boot.
But things called from crash_kexec should be absolute necessities and I
do not see this as coming anywhere close to being something that is
impossible to do in the target kernel.
Zhenhua, Intrestingly, PPC has mechanism to reset the root port for
kdump case
in order to drop pending DMA traffic. Maybe you can implement similar
thing.
However, this kind of reset would be platform/board specific and needs
support
from underly firmware. More details could be found from arch/powerpc/
platforms/powernv/pci-ioda.c
if (is_kdump_kernel()) {
pr_info(" Issue PHB reset ...\n");
ioda_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL);
ioda_eeh_phb_reset(hose, OPAL_DEASSERT_RESET);
}
Please check if it's the thing you're looking for. I didn't understand
your
requirements 100%
Thanks,
Gavin
Gavin,
I was trying to fix a DMAR fault for iommu. On X86 platform, iommu is
initialized after pci , while on powerpc iommu is before pci. So I
tried to do the operation in the first kernel, and this can work on all
platforms.
Sorry I made mistake. it should be sparc, not powerpc.
But according to Eric's mail, it is inappropriate doing this in
crash_kexec. So I have to figure out how to do this in the kdump kernel.
As it is clear the powerpc has already do the resetting during booting,
so I only need to implement a similar mechanism on X86 system.
Thanks
Zhenhua
Eric
On a Linux system with iommu supported and many PCI devices on it,
when kernel crashed and the kdump kernel boots with intel_iommu=on,
there may be some unexpected DMA requests on this adapter, which will
cause DMA Remapping faults like:
dmar: DRHD: handling fault status reg 102
dmar: DMAR:[DMA Read] Request device [41:00.0] fault addr fff81000
DMAR:[fault reason 01] Present bit in root entry is clear
This bug may happen on *any* PCI device.
Analysis for this bug:
The present bit is set in this function:
static struct context_entry * device_to_context_entry(
struct intel_iommu *iommu, u8 bus, u8 devfn)
{
......
set_root_present(root);
......
}
Calling tree:
device driver
intel_alloc_coherent
__intel_map_single
domain_context_mapping
domain_context_mapping_one
device_to_context_entry
This means, the present bit in root entry will not be set until the
device
driver is loaded.
But in the kdump kernel, hardware devices are not aware that control
has
transferred to the second kernel, and those drivers must initialize
again.
Consequently there may be unexpected DMA requests from devices activity
initiated in the first kernel leading to the DMA Remapping errors in
the
second kernel.
To fix this DMAR fault, we need to reset the bus that this device
on. Reset
the device itself does not work.
A patch for this bug that has been sent before:
https://lkml.org/lkml/2014/9/30/55
As in discussion, this bug may happen on *any* device, so we need to
reset
all pci devices.
There was an original version(Takao Indoh) that resets the pcie
devices:
https://lkml.org/lkml/2013/5/14/9
According to the previous discussion, On sparc, the IOMMU is
initialized
before PCI devices are enumerated, this patch does the resetting
works before
the kdump kernel boots, so it can also fix the problems on sparc.
Update of this new version, comparing with Takao Indoh's version:
Add support for legacy PCI devices.
Use pci_try_reset_bus instead of do_downstream_device_reset.
Reset all PCI/PCIe deviecs in the first kernel, before kdump
kernel boots.
Randy Wright corrects some misunderstanding in this description.
Signed-off-by: Li, Zhen-Hua <zhen-hual@xxxxxx>
Signed-off-by: Takao Indoh <indou.takao@xxxxxxxxxxxxxx>
Signed-off-by: Randy Wright <rwright@xxxxxx>
---
drivers/pci/pci.c | 82
+++++++++++++++++++++++++++++++++++++++++++++++++++++
include/linux/pci.h | 6 ++++
kernel/kexec.c | 2 ++
3 files changed, 90 insertions(+)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 625a4ac..aa9192a 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -23,6 +23,7 @@
#include <linux/device.h>
#include <linux/pm_runtime.h>
#include <linux/pci_hotplug.h>
+#include <linux/crash_dump.h>
#include <asm-generic/pci-bridge.h>
#include <asm/setup.h>
#include "pci.h"
@@ -4466,6 +4467,87 @@ void __weak pci_fixup_cardbus(struct pci_bus
*bus)
}
EXPORT_SYMBOL(pci_fixup_cardbus);
+/*
+ * Return true if dev is PCI root port or downstream port whose
child is PCI
+ * endpoint except VGA device.
+ */
+static int __pci_dev_need_reset(struct pci_dev *dev)
+{
+ struct pci_bus *subordinate;
+ struct pci_dev *child;
+
+ if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
+ return 0;
+
+ if (pci_is_pcie(dev)) {
+ if ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) &&
+ (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM))
+ return 0;
+ }
+
+ subordinate = dev->subordinate;
+ list_for_each_entry(child, &subordinate->devices, bus_list) {
+ /* Don't reset switch, bridge, VGA device */
+ if ((child->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
+ ((child->class >> 16) == PCI_BASE_CLASS_BRIDGE) ||
+ ((child->class >> 16) == PCI_BASE_CLASS_DISPLAY))
+ return 0;
+
+ if (pci_is_pcie(child)) {
+ if ((pci_pcie_type(child) == PCI_EXP_TYPE_UPSTREAM) ||
+ (pci_pcie_type(child) == PCI_EXP_TYPE_PCI_BRIDGE))
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+struct pci_dev_reset_entry {
+ struct list_head list;
+ struct pci_dev *dev;
+};
+int pci_reset_endpoints(void)
+{
+ struct pci_dev *dev = NULL;
+ struct pci_dev_reset_entry *pdev_entry, *tmp;
+ struct pci_bus *subordinate = NULL;
+ int has_it;
+
+ LIST_HEAD(pdev_list);
+
+
+ for_each_pci_dev(dev) {
+ subordinate = dev->subordinate;
+ if (!subordinate || list_empty(&subordinate->devices))
+ continue;
+
+ has_it = 0;
+ list_for_each_entry(pdev_entry, &pdev_list, list) {
+ if (dev == pdev_entry->dev) {
+ has_it = 1;
+ break;
+ }
+ }
+ if (has_it)
+ continue;
+
+ if (__pci_dev_need_reset(dev)) {
+ pdev_entry = kmalloc(sizeof(*pdev_entry), GFP_KERNEL);
+ pdev_entry->dev = dev;
+ list_add(&pdev_entry->list, &pdev_list);
+ }
+ }
+
+ list_for_each_entry_safe(pdev_entry, tmp, &pdev_list, list) {
+ pci_try_reset_bus(pdev_entry->dev->subordinate);
+ kfree(pdev_entry);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pci_reset_endpoints);
+
static int __init pci_setup(char *str)
{
while (str) {
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 5be8db4..1cf7207 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1869,4 +1869,10 @@ static inline bool pci_is_dev_assigned(struct
pci_dev *pdev)
{
return (pdev->dev_flags & PCI_DEV_FLAGS_ASSIGNED) ==
PCI_DEV_FLAGS_ASSIGNED;
}
+
+/*
+ * Reset all pci devices by resetting the buses.
+ */
+int pci_reset_endpoints(void);
+
#endif /* LINUX_PCI_H */
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 2abf9f6..986e8f7 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -36,6 +36,7 @@
#include <linux/syscore_ops.h>
#include <linux/compiler.h>
#include <linux/hugetlb.h>
+#include <linux/pci.h>
#include <asm/page.h>
#include <asm/uaccess.h>
@@ -1474,6 +1475,7 @@ void crash_kexec(struct pt_regs *regs)
if (kexec_crash_image) {
struct pt_regs fixed_regs;
+ pci_reset_endpoints();
crash_setup_regs(&fixed_regs, regs);
crash_save_vmcoreinfo();
machine_crash_shutdown(&fixed_regs);
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/