[PATCH 01/19] MIPS: Malta: Use gic_read_count() to read GIC timer

[Andrew Bresticker]

Instead of reading the GIC registers directly, use the interface the GIC
driver already exposes for reading the global timer.  Also get rid of
the unnecessary #ifdefs.

Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
---
 arch/mips/mti-malta/malta-time.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c
index f6ca8ea..39f3902 100644
--- a/arch/mips/mti-malta/malta-time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -70,9 +70,7 @@ static void __init estimate_frequencies(void)
 {
 	unsigned long flags;
 	unsigned int count, start;
-#ifdef CONFIG_MIPS_GIC
-	unsigned int giccount = 0, gicstart = 0;
-#endif
+	cycle_t giccount = 0, gicstart = 0;
 
 #if defined(CONFIG_KVM_GUEST) && CONFIG_KVM_GUEST_TIMER_FREQ
 	mips_hpt_frequency = CONFIG_KVM_GUEST_TIMER_FREQ * 1000000;
@@ -87,32 +85,26 @@ static void __init estimate_frequencies(void)
 
 	/* Initialize counters. */
 	start = read_c0_count();
-#ifdef CONFIG_MIPS_GIC
 	if (gic_present)
-		GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), gicstart);
-#endif
+		gicstart = gic_read_count();
 
 	/* Read counter exactly on falling edge of update flag. */
 	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
 	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
 
 	count = read_c0_count();
-#ifdef CONFIG_MIPS_GIC
 	if (gic_present)
-		GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), giccount);
-#endif
+		giccount = gic_read_count();
 
 	local_irq_restore(flags);
 
 	count -= start;
 	mips_hpt_frequency = count;
 
-#ifdef CONFIG_MIPS_GIC
 	if (gic_present) {
 		giccount -= gicstart;
 		gic_frequency = giccount;
 	}
-#endif
 }
 
 void read_persistent_clock(struct timespec *ts)
-- 
2.1.0.rc2.206.gedb03e5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/