Re: [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator
From: Vladimir Zapolskiy
Date: Mon Oct 20 2014 - 19:28:50 EST
Hello LABBE,
On 19.10.2014 17:16, LABBE Corentin wrote:
> Add support for the Security System included in Allwinner SoC A20.
> The Security System is a hardware cryptographic accelerator that support AES/MD5/SHA1/DES/3DES/PRNG algorithms.
>
> Signed-off-by: LABBE Corentin <clabbe.montjoie@xxxxxxxxx>
> ---
> drivers/crypto/Kconfig | 17 ++
> drivers/crypto/Makefile | 1 +
> drivers/crypto/sunxi-ss/Makefile | 2 +
> drivers/crypto/sunxi-ss/sunxi-ss-cipher.c | 489 ++++++++++++++++++++++++++++++
> drivers/crypto/sunxi-ss/sunxi-ss-core.c | 318 +++++++++++++++++++
> drivers/crypto/sunxi-ss/sunxi-ss-hash.c | 445 +++++++++++++++++++++++++++
> drivers/crypto/sunxi-ss/sunxi-ss.h | 193 ++++++++++++
> 7 files changed, 1465 insertions(+)
> create mode 100644 drivers/crypto/sunxi-ss/Makefile
> create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-cipher.c
> create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-core.c
> create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-hash.c
> create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss.h
>
> diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
> index 2fb0fdf..9ba9759 100644
> --- a/drivers/crypto/Kconfig
> +++ b/drivers/crypto/Kconfig
> @@ -436,4 +436,21 @@ config CRYPTO_DEV_QCE
> hardware. To compile this driver as a module, choose M here. The
> module will be called qcrypto.
>
> +config CRYPTO_DEV_SUNXI_SS
> + tristate "Support for Allwinner Security System cryptographic accelerator"
> + depends on ARCH_SUNXI
> + select CRYPTO_MD5
> + select CRYPTO_SHA1
> + select CRYPTO_AES
> + select CRYPTO_DES
> + select CRYPTO_BLKCIPHER
> + help
> + Some Allwinner SoC have a crypto accelerator named
> + Security System. Select this if you want to use it.
> + The Security System handle AES/DES/3DES ciphers in CBC mode
> + and SHA1 and MD5 hash algorithms.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called sunxi-ss.
> +
> endif # CRYPTO_HW
> diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
> index 3924f93..856545c 100644
> --- a/drivers/crypto/Makefile
> +++ b/drivers/crypto/Makefile
> @@ -25,3 +25,4 @@ obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
> obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/
> obj-$(CONFIG_CRYPTO_DEV_QAT) += qat/
> obj-$(CONFIG_CRYPTO_DEV_QCE) += qce/
> +obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS) += sunxi-ss/
> diff --git a/drivers/crypto/sunxi-ss/Makefile b/drivers/crypto/sunxi-ss/Makefile
> new file mode 100644
> index 0000000..8bb287d
> --- /dev/null
> +++ b/drivers/crypto/sunxi-ss/Makefile
> @@ -0,0 +1,2 @@
> +obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS) += sunxi-ss.o
> +sunxi-ss-y += sunxi-ss-core.o sunxi-ss-hash.o sunxi-ss-cipher.o
> diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c b/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c
> new file mode 100644
> index 0000000..8d0416e
> --- /dev/null
> +++ b/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c
> @@ -0,0 +1,489 @@
> +/*
> + * sunxi-ss-cipher.c - hardware cryptographic accelerator for Allwinner A20 SoC
> + *
> + * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@xxxxxxxxx>
> + *
> + * This file add support for AES cipher with 128,192,256 bits
> + * keysize in CBC mode.
> + * Add support also for DES and 3DES in CBC mode.
> + *
> + * You could find the datasheet in Documentation/arm/sunxi/README
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#include "sunxi-ss.h"
> +
> +extern struct sunxi_ss_ctx *ss;
> +
> +static int sunxi_ss_cipher(struct ablkcipher_request *areq, u32 mode)
> +{
> + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
> + struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
> + const char *cipher_type;
> +
> + if (areq->nbytes == 0)
> + return 0;
> +
> + if (areq->info == NULL) {
> + dev_err(ss->dev, "ERROR: Empty IV\n");
> + return -EINVAL;
> + }
> +
> + if (areq->src == NULL || areq->dst == NULL) {
> + dev_err(ss->dev, "ERROR: Some SGs are NULL\n");
> + return -EINVAL;
> + }
> +
> + cipher_type = crypto_tfm_alg_name(crypto_ablkcipher_tfm(tfm));
> +
> + if (strcmp("cbc(aes)", cipher_type) == 0) {
> + mode |= SS_OP_AES | SS_CBC | SS_ENABLED | op->keymode;
> + return sunxi_ss_aes_poll(areq, mode);
> + }
> +
> + if (strcmp("cbc(des)", cipher_type) == 0) {
> + mode |= SS_OP_DES | SS_CBC | SS_ENABLED | op->keymode;
> + return sunxi_ss_des_poll(areq, mode);
> + }
> +
> + if (strcmp("cbc(des3_ede)", cipher_type) == 0) {
> + mode |= SS_OP_3DES | SS_CBC | SS_ENABLED | op->keymode;
> + return sunxi_ss_des_poll(areq, mode);
> + }
> +
> + dev_err(ss->dev, "ERROR: Cipher %s not handled\n", cipher_type);
> + return -EINVAL;
> +}
> +
> +int sunxi_ss_cipher_encrypt(struct ablkcipher_request *areq)
> +{
> + return sunxi_ss_cipher(areq, SS_ENCRYPTION);
> +}
> +
> +int sunxi_ss_cipher_decrypt(struct ablkcipher_request *areq)
> +{
> + return sunxi_ss_cipher(areq, SS_DECRYPTION);
> +}
> +
> +int sunxi_ss_cipher_init(struct crypto_tfm *tfm)
> +{
> + struct sunxi_tfm_ctx *op = crypto_tfm_ctx(tfm);
> +
> + memset(op, 0, sizeof(struct sunxi_tfm_ctx));
> + return 0;
> +}
> +
> +/*
> + * Optimized function for the case where we have only one SG,
> + * so we can use kmap_atomic
> + */
> +static int sunxi_ss_aes_poll_atomic(struct ablkcipher_request *areq)
> +{
> + u32 spaces;
> + struct scatterlist *in_sg = areq->src;
> + struct scatterlist *out_sg = areq->dst;
> + void *src_addr;
> + void *dst_addr;
> + unsigned int ileft = areq->nbytes;
> + unsigned int oleft = areq->nbytes;
> + unsigned int todo;
> + u32 *src32;
> + u32 *dst32;
> + u32 rx_cnt = 32;
> + u32 tx_cnt = 0;
> + int i;
> +
> + src_addr = kmap_atomic(sg_page(in_sg)) + in_sg->offset;
> + if (src_addr == NULL) {
> + dev_err(ss->dev, "kmap_atomic error for src SG\n");
> + writel(0, ss->base + SS_CTL);
> + mutex_unlock(&ss->lock);
> + return -EINVAL;
> + }
> +
> + dst_addr = kmap_atomic(sg_page(out_sg)) + out_sg->offset;
> + if (dst_addr == NULL) {
> + dev_err(ss->dev, "kmap_atomic error for dst SG\n");
> + writel(0, ss->base + SS_CTL);
> + kunmap_atomic(src_addr);
> + mutex_unlock(&ss->lock);
> + return -EINVAL;
> + }
> +
> + src32 = (u32 *)src_addr;
> + dst32 = (u32 *)dst_addr;
> + ileft = areq->nbytes / 4;
> + oleft = areq->nbytes / 4;
> + i = 0;
> + do {
> + if (ileft > 0 && rx_cnt > 0) {
> + todo = min(rx_cnt, ileft);
> + ileft -= todo;
> + do {
> + writel_relaxed(*src32++,
> + ss->base +
> + SS_RXFIFO);
> + todo--;
> + } while (todo > 0);
> + }
> + if (tx_cnt > 0) {
> + todo = min(tx_cnt, oleft);
> + oleft -= todo;
> + do {
> + *dst32++ = readl_relaxed(ss->base +
> + SS_TXFIFO);
> + todo--;
> + } while (todo > 0);
> + }
> + spaces = readl_relaxed(ss->base + SS_FCSR);
> + rx_cnt = SS_RXFIFO_SPACES(spaces);
> + tx_cnt = SS_TXFIFO_SPACES(spaces);
> + } while (oleft > 0);
> + writel(0, ss->base + SS_CTL);
> + kunmap_atomic(src_addr);
> + kunmap_atomic(dst_addr);
> + mutex_unlock(&ss->lock);
> + return 0;
> +}
> +
> +int sunxi_ss_aes_poll(struct ablkcipher_request *areq, u32 mode)
> +{
> + u32 spaces;
> + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
> + struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
> + unsigned int ivsize = crypto_ablkcipher_ivsize(tfm);
> + /* when activating SS, the default FIFO space is 32 */
> + u32 rx_cnt = 32;
> + u32 tx_cnt = 0;
> + u32 v;
> + int i;
> + struct scatterlist *in_sg = areq->src;
> + struct scatterlist *out_sg = areq->dst;
> + void *src_addr;
> + void *dst_addr;
> + unsigned int ileft = areq->nbytes;
> + unsigned int oleft = areq->nbytes;
> + unsigned int sgileft = areq->src->length;
> + unsigned int sgoleft = areq->dst->length;
> + unsigned int todo;
> + u32 *src32;
> + u32 *dst32;
> +
> + mutex_lock(&ss->lock);
> +
> + for (i = 0; i < op->keylen; i += 4)
> + writel(*(op->key + i/4), ss->base + SS_KEY0 + i);
> +
> + if (areq->info != NULL) {
> + for (i = 0; i < 4 && i < ivsize / 4; i++) {
> + v = *(u32 *)(areq->info + i * 4);
> + writel(v, ss->base + SS_IV0 + i * 4);
> + }
> + }
> + writel(mode, ss->base + SS_CTL);
> +
> + /* If we have only one SG, we can use kmap_atomic */
> + if (sg_next(in_sg) == NULL && sg_next(out_sg) == NULL)
> + return sunxi_ss_aes_poll_atomic(areq);
for clarity it might be better to move all "mutex_unlock(&ss->lock)"
calls from sunxi_ss_aes_poll_atomic() body right to here.
> +
> + /*
> + * If we have more than one SG, we cannot use kmap_atomic since
> + * we hold the mapping too long
> + */
> + src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
> + if (src_addr == NULL) {
> + dev_err(ss->dev, "KMAP error for src SG\n");
> + mutex_unlock(&ss->lock);
> + return -EINVAL;
> + }
> + dst_addr = kmap(sg_page(out_sg)) + out_sg->offset;
> + if (dst_addr == NULL) {
> + kunmap(sg_page(in_sg));
> + dev_err(ss->dev, "KMAP error for dst SG\n");
> + mutex_unlock(&ss->lock);
> + return -EINVAL;
> + }
> + src32 = (u32 *)src_addr;
> + dst32 = (u32 *)dst_addr;
> + ileft = areq->nbytes / 4;
> + oleft = areq->nbytes / 4;
> + sgileft = in_sg->length / 4;
> + sgoleft = out_sg->length / 4;
> + do {
> + spaces = readl_relaxed(ss->base + SS_FCSR);
> + rx_cnt = SS_RXFIFO_SPACES(spaces);
> + tx_cnt = SS_TXFIFO_SPACES(spaces);
> + todo = min3(rx_cnt, ileft, sgileft);
> + if (todo > 0) {
> + ileft -= todo;
> + sgileft -= todo;
> + }
> + while (todo > 0) {
> + writel_relaxed(*src32++, ss->base + SS_RXFIFO);
> + todo--;
> + }
> + if (in_sg != NULL && sgileft == 0 && ileft > 0) {
> + kunmap(sg_page(in_sg));
> + in_sg = sg_next(in_sg);
> + while (in_sg != NULL && in_sg->length == 0)
> + in_sg = sg_next(in_sg);
> + if (in_sg != NULL && ileft > 0) {
> + src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
> + if (src_addr == NULL) {
> + dev_err(ss->dev, "ERROR: KMAP for src SG\n");
> + mutex_unlock(&ss->lock);
> + return -EINVAL;
> + }
> + src32 = src_addr;
> + sgileft = in_sg->length / 4;
> + }
> + }
> + /* do not test oleft since when oleft == 0 we have finished */
> + todo = min3(tx_cnt, oleft, sgoleft);
> + if (todo > 0) {
> + oleft -= todo;
> + sgoleft -= todo;
> + }
> + while (todo > 0) {
> + *dst32++ = readl_relaxed(ss->base + SS_TXFIFO);
> + todo--;
> + }
> + if (out_sg != NULL && sgoleft == 0 && oleft >= 0) {
> + kunmap(sg_page(out_sg));
> + out_sg = sg_next(out_sg);
> + while (out_sg != NULL && out_sg->length == 0)
> + out_sg = sg_next(out_sg);
> + if (out_sg != NULL && oleft > 0) {
> + dst_addr = kmap(sg_page(out_sg)) +
> + out_sg->offset;
> + if (dst_addr == NULL) {
> + dev_err(ss->dev, "KMAP error\n");
> + mutex_unlock(&ss->lock);
> + return -EINVAL;
> + }
> + dst32 = dst_addr;
> + sgoleft = out_sg->length / 4;
> + }
> + }
> + } while (oleft > 0);
> +
> + writel_relaxed(0, ss->base + SS_CTL);
> + mutex_unlock(&ss->lock);
> + return 0;
> +}
> +
> +/*
> + * Pure CPU way of doing DES/3DES with SS
> + * Since DES and 3DES SGs could be smaller than 4 bytes, I use sg_copy_to_buffer
> + * for "linearize" them.
> + * The problem with that is that I alloc (2 x areq->nbytes) for buf_in/buf_out
> + * TODO: change this system, I need to support other mode than CBC where len
> + * is not a multiple of 4 and the hack of linearize use too much memory
> + * SGsrc -> buf_in -> SS -> buf_out -> SGdst
> + */
> +int sunxi_ss_des_poll(struct ablkcipher_request *areq, u32 mode)
> +{
> + u32 value, spaces;
> + size_t nb_in_sg_tx, nb_in_sg_rx;
> + size_t ir, it;
> + struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
> + struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
> + unsigned int ivsize = crypto_ablkcipher_ivsize(tfm);
> + u32 tx_cnt = 0;
> + u32 rx_cnt = 0;
> + u32 v;
> + int i;
> + int no_chunk = 1;
> + struct scatterlist *in_sg = areq->src;
> + struct scatterlist *out_sg = areq->dst;
> +
> + /*
> + * if we have only SGs with size multiple of 4,
> + * we can use the SS AES function
> + */
> + while (in_sg != NULL && no_chunk == 1) {
> + if ((in_sg->length % 4) != 0)
> + no_chunk = 0;
> + in_sg = sg_next(in_sg);
> + }
> + while (out_sg != NULL && no_chunk == 1) {
> + if ((out_sg->length % 4) != 0)
> + no_chunk = 0;
> + out_sg = sg_next(out_sg);
> + }
> +
> + if (no_chunk == 1)
> + return sunxi_ss_aes_poll(areq, mode);
> +
> + in_sg = areq->src;
> + out_sg = areq->dst;
> +
> + nb_in_sg_rx = sg_nents(in_sg);
> + nb_in_sg_tx = sg_nents(out_sg);
> +
> + /*
> + * buf_in and buf_out are allocated only one time
> + * then we keep the buffer until driver end
> + * the allocation can only grow more
> + * we do not reduce it for simplification
> + */
> + mutex_lock(&ss->bufin_lock);
> + if (ss->buf_in == NULL) {
> + ss->buf_in = kmalloc(areq->nbytes, GFP_KERNEL);
> + ss->buf_in_size = areq->nbytes;
> + } else {
> + if (areq->nbytes > ss->buf_in_size) {
> + kfree(ss->buf_in);
> + ss->buf_in = kmalloc(areq->nbytes, GFP_KERNEL);
> + ss->buf_in_size = areq->nbytes;
> + }
> + }
> + if (ss->buf_in == NULL) {
> + ss->buf_in_size = 0;
> + mutex_unlock(&ss->bufin_lock);
> + dev_err(ss->dev, "Unable to allocate pages.\n");
> + return -ENOMEM;
> + }
> + mutex_lock(&ss->bufout_lock);
> + if (ss->buf_out == NULL) {
> + ss->buf_out = kmalloc(areq->nbytes, GFP_KERNEL);
> + if (ss->buf_out == NULL) {
> + ss->buf_out_size = 0;
> + mutex_unlock(&ss->bufin_lock);
> + mutex_unlock(&ss->bufout_lock);
> + dev_err(ss->dev, "Unable to allocate pages.\n");
> + return -ENOMEM;
> + }
> + ss->buf_out_size = areq->nbytes;
> + } else {
> + if (areq->nbytes > ss->buf_out_size) {
> + kfree(ss->buf_out);
> + ss->buf_out = kmalloc(areq->nbytes, GFP_KERNEL);
> + if (ss->buf_out == NULL) {
> + ss->buf_out_size = 0;
> + mutex_unlock(&ss->bufin_lock);
> + mutex_unlock(&ss->bufout_lock);
> + dev_err(ss->dev, "Unable to allocate pages.\n");
> + return -ENOMEM;
> + }
> + ss->buf_out_size = areq->nbytes;
> + }
> + }
> +
> + sg_copy_to_buffer(areq->src, nb_in_sg_rx, ss->buf_in, areq->nbytes);
> +
> + ir = 0;
> + it = 0;
> + mutex_lock(&ss->lock);
> +
> + for (i = 0; i < op->keylen; i += 4)
> + writel(*(op->key + i/4), ss->base + SS_KEY0 + i);
> + if (areq->info != NULL) {
> + for (i = 0; i < 4 && i < ivsize / 4; i++) {
> + v = *(u32 *)(areq->info + i * 4);
> + writel(v, ss->base + SS_IV0 + i * 4);
> + }
> + }
> + writel(mode, ss->base + SS_CTL);
> +
> + do {
> + if (rx_cnt == 0 || tx_cnt == 0) {
> + spaces = readl(ss->base + SS_FCSR);
> + rx_cnt = SS_RXFIFO_SPACES(spaces);
> + tx_cnt = SS_TXFIFO_SPACES(spaces);
> + }
> + if (rx_cnt > 0 && ir < areq->nbytes) {
> + do {
> + value = *(u32 *)(ss->buf_in + ir);
> + writel(value, ss->base + SS_RXFIFO);
> + ir += 4;
> + rx_cnt--;
> + } while (rx_cnt > 0 && ir < areq->nbytes);
> + }
> + if (tx_cnt > 0 && it < areq->nbytes) {
> + do {
> + value = readl(ss->base + SS_TXFIFO);
> + *(u32 *)(ss->buf_out + it) = value;
> + it += 4;
> + tx_cnt--;
> + } while (tx_cnt > 0 && it < areq->nbytes);
> + }
> + if (ir == areq->nbytes) {
> + mutex_unlock(&ss->bufin_lock);
> + ir++;
> + }
> + } while (it < areq->nbytes);
> +
> + writel(0, ss->base + SS_CTL);
> + mutex_unlock(&ss->lock);
> +
> + /*
> + * a simple optimization, since we dont need the hardware for this copy
> + * we release the lock and do the copy. With that we gain 5/10% perf
> + */
> + sg_copy_from_buffer(areq->dst, nb_in_sg_tx, ss->buf_out, areq->nbytes);
> +
> + mutex_unlock(&ss->bufout_lock);
> + return 0;
> +}
> +
> +/* check and set the AES key, prepare the mode to be used */
> +int sunxi_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
> + unsigned int keylen)
> +{
> + struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
> +
> + switch (keylen) {
> + case 128 / 8:
> + op->keymode = SS_AES_128BITS;
> + break;
> + case 192 / 8:
> + op->keymode = SS_AES_192BITS;
> + break;
> + case 256 / 8:
> + op->keymode = SS_AES_256BITS;
> + break;
> + default:
> + dev_err(ss->dev, "ERROR: Invalid keylen %u\n", keylen);
> + crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
> + return -EINVAL;
> + }
> + op->keylen = keylen;
> + memcpy(op->key, key, keylen);
> + return 0;
> +}
> +
> +/* check and set the DES key, prepare the mode to be used */
> +int sunxi_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
> + unsigned int keylen)
> +{
> + struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
> +
> + if (keylen != DES_KEY_SIZE) {
> + dev_err(ss->dev, "Invalid keylen %u\n", keylen);
> + crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
> + return -EINVAL;
> + }
> + op->keylen = keylen;
> + memcpy(op->key, key, keylen);
> + return 0;
> +}
> +
> +/* check and set the 3DES key, prepare the mode to be used */
> +int sunxi_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
> + unsigned int keylen)
> +{
> + struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm);
> +
> + if (keylen != 3 * DES_KEY_SIZE) {
> + dev_err(ss->dev, "Invalid keylen %u\n", keylen);
> + crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
> + return -EINVAL;
> + }
> + op->keylen = keylen;
> + memcpy(op->key, key, keylen);
> + return 0;
> +}
> diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-core.c b/drivers/crypto/sunxi-ss/sunxi-ss-core.c
> new file mode 100644
> index 0000000..e66d7e2
> --- /dev/null
> +++ b/drivers/crypto/sunxi-ss/sunxi-ss-core.c
> @@ -0,0 +1,318 @@
> +/*
> + * sunxi-ss-core.c - hardware cryptographic accelerator for Allwinner A20 SoC
> + *
> + * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@xxxxxxxxx>
> + *
> + * Core file which registers crypto algorithms supported by the SS.
> + *
> + * You could find a link for the datasheet in Documentation/arm/sunxi/README
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#include <linux/clk.h>
> +#include <linux/crypto.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <crypto/scatterwalk.h>
> +#include <linux/scatterlist.h>
> +#include <linux/interrupt.h>
> +#include <linux/delay.h>
> +
> +#include "sunxi-ss.h"
> +
> +struct sunxi_ss_ctx *ss;
> +
> +/*
> + * General notes for whole driver:
> + *
> + * After each request the device must be disabled with a write of 0 in SS_CTL
> + *
> + * For performance reason, we use writel_relaxed/read_relaxed for all
> + * operations on RX and TX FIFO and also SS_FCSR.
> + * Excepts for the last write on TX FIFO.
> + * For all other registers, we use writel/readl.
> + * See http://permalink.gmane.org/gmane.linux.ports.arm.kernel/117644
> + * and http://permalink.gmane.org/gmane.linux.ports.arm.kernel/117640
> + */
> +
> +static struct ahash_alg sunxi_md5_alg = {
> + .init = sunxi_hash_init,
> + .update = sunxi_hash_update,
> + .final = sunxi_hash_final,
> + .finup = sunxi_hash_finup,
> + .digest = sunxi_hash_digest,
> + .halg = {
> + .digestsize = MD5_DIGEST_SIZE,
> + .base = {
> + .cra_name = "md5",
> + .cra_driver_name = "md5-sunxi-ss",
> + .cra_priority = 300,
> + .cra_alignmask = 3,
> + .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC,
> + .cra_blocksize = MD5_HMAC_BLOCK_SIZE,
> + .cra_ctxsize = sizeof(struct sunxi_req_ctx),
> + .cra_module = THIS_MODULE,
> + .cra_type = &crypto_ahash_type,
> + .cra_init = sunxi_hash_crainit
> + }
> + }
> +};
> +
> +static struct ahash_alg sunxi_sha1_alg = {
> + .init = sunxi_hash_init,
> + .update = sunxi_hash_update,
> + .final = sunxi_hash_final,
> + .finup = sunxi_hash_finup,
> + .digest = sunxi_hash_digest,
> + .halg = {
> + .digestsize = SHA1_DIGEST_SIZE,
> + .base = {
> + .cra_name = "sha1",
> + .cra_driver_name = "sha1-sunxi-ss",
> + .cra_priority = 300,
> + .cra_alignmask = 3,
> + .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC,
> + .cra_blocksize = SHA1_BLOCK_SIZE,
> + .cra_ctxsize = sizeof(struct sunxi_req_ctx),
> + .cra_module = THIS_MODULE,
> + .cra_type = &crypto_ahash_type,
> + .cra_init = sunxi_hash_crainit
> + }
> + }
> +};
> +
> +static struct crypto_alg sunxi_cipher_algs[] = {
> +{
> + .cra_name = "cbc(aes)",
> + .cra_driver_name = "cbc-aes-sunxi-ss",
> + .cra_priority = 300,
> + .cra_blocksize = AES_BLOCK_SIZE,
> + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER,
> + .cra_ctxsize = sizeof(struct sunxi_tfm_ctx),
> + .cra_module = THIS_MODULE,
> + .cra_alignmask = 3,
> + .cra_type = &crypto_ablkcipher_type,
> + .cra_init = sunxi_ss_cipher_init,
> + .cra_u = {
> + .ablkcipher = {
> + .min_keysize = AES_MIN_KEY_SIZE,
> + .max_keysize = AES_MAX_KEY_SIZE,
> + .ivsize = AES_BLOCK_SIZE,
> + .setkey = sunxi_ss_aes_setkey,
> + .encrypt = sunxi_ss_cipher_encrypt,
> + .decrypt = sunxi_ss_cipher_decrypt,
> + }
> + }
> +}, {
> + .cra_name = "cbc(des)",
> + .cra_driver_name = "cbc-des-sunxi-ss",
> + .cra_priority = 300,
> + .cra_blocksize = DES_BLOCK_SIZE,
> + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER,
> + .cra_ctxsize = sizeof(struct sunxi_req_ctx),
> + .cra_module = THIS_MODULE,
> + .cra_alignmask = 3,
> + .cra_type = &crypto_ablkcipher_type,
> + .cra_init = sunxi_ss_cipher_init,
> + .cra_u.ablkcipher = {
> + .min_keysize = DES_KEY_SIZE,
> + .max_keysize = DES_KEY_SIZE,
> + .ivsize = DES_BLOCK_SIZE,
> + .setkey = sunxi_ss_des_setkey,
> + .encrypt = sunxi_ss_cipher_encrypt,
> + .decrypt = sunxi_ss_cipher_decrypt,
> + }
> +}, {
> + .cra_name = "cbc(des3_ede)",
> + .cra_driver_name = "cbc-des3-sunxi-ss",
> + .cra_priority = 300,
> + .cra_blocksize = DES3_EDE_BLOCK_SIZE,
> + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER,
> + .cra_ctxsize = sizeof(struct sunxi_req_ctx),
> + .cra_module = THIS_MODULE,
> + .cra_alignmask = 3,
> + .cra_type = &crypto_ablkcipher_type,
> + .cra_init = sunxi_ss_cipher_init,
> + .cra_u.ablkcipher = {
> + .min_keysize = DES3_EDE_KEY_SIZE,
> + .max_keysize = DES3_EDE_KEY_SIZE,
> + .ivsize = DES3_EDE_BLOCK_SIZE,
> + .setkey = sunxi_ss_des3_setkey,
> + .encrypt = sunxi_ss_cipher_encrypt,
> + .decrypt = sunxi_ss_cipher_decrypt,
> + }
> +}
> +};
> +
> +static int sunxi_ss_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + u32 v;
> + int err;
> + unsigned long cr;
> + const unsigned long cr_ahb = 24 * 1000 * 1000;
> + const unsigned long cr_mod = 150 * 1000 * 1000;
> +
> + if (!pdev->dev.of_node)
> + return -ENODEV;
> +
> + ss = devm_kzalloc(&pdev->dev, sizeof(*ss), GFP_KERNEL);
> + if (ss == NULL)
> + return -ENOMEM;
Why do you dynamically allocate memory for "struct sunxi_ss_ctx *ss"?
Since you have a single global pointer, it makes sense to declare
"struct sunxi_ss_ctx ss" statically instead.
And even a better solution is to remove a single global pointer.
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + ss->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(ss->base)) {
> + dev_err(&pdev->dev, "Cannot request MMIO\n");
> + return PTR_ERR(ss->base);
> + }
> +
> + ss->ssclk = devm_clk_get(&pdev->dev, "mod");
> + if (IS_ERR(ss->ssclk)) {
> + err = PTR_ERR(ss->ssclk);
> + dev_err(&pdev->dev, "Cannot get SS clock err=%d\n", err);
> + return err;
> + }
> + dev_dbg(&pdev->dev, "clock ss acquired\n");
> +
> + ss->busclk = devm_clk_get(&pdev->dev, "ahb");
> + if (IS_ERR(ss->busclk)) {
> + err = PTR_ERR(ss->busclk);
> + dev_err(&pdev->dev, "Cannot get AHB SS clock err=%d\n", err);
> + return err;
> + }
> + dev_dbg(&pdev->dev, "clock ahb_ss acquired\n");
> +
> + /* Enable both clocks */
> + err = clk_prepare_enable(ss->busclk);
> + if (err != 0) {
> + dev_err(&pdev->dev, "Cannot prepare_enable busclk\n");
> + return err;
> + }
> + err = clk_prepare_enable(ss->ssclk);
> + if (err != 0) {
> + dev_err(&pdev->dev, "Cannot prepare_enable ssclk\n");
> + clk_disable_unprepare(ss->busclk);
goto somewhere to the end of the function?
> + return err;
> + }
> +
> + /*
> + * Check that clock have the correct rates gived in the datasheet
> + * Try to set the clock to the maximum allowed
> + */
> + err = clk_set_rate(ss->ssclk, cr_mod);
> + if (err != 0) {
> + dev_err(&pdev->dev, "Cannot set clock rate to ssclk\n");
> + clk_disable_unprepare(ss->ssclk);
> + clk_disable_unprepare(ss->busclk);
goto "error_md5"?
> + return err;
> + }
> +
> + cr = clk_get_rate(ss->busclk);
> + if (cr >= cr_ahb)
> + dev_dbg(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
> + cr, cr / 1000000, cr_ahb);
> + else
> + dev_warn(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
> + cr, cr / 1000000, cr_ahb);
See next comment.
> + cr = clk_get_rate(ss->ssclk);
> + if (cr <= cr_mod)
> + if (cr < cr_mod)
> + dev_info(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n",
> + cr, cr / 1000000, cr_mod);
> + else
> + dev_dbg(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n",
> + cr, cr / 1000000, cr_mod);
> + else
> + dev_warn(&pdev->dev, "Clock ss is at %lu (%lu MHz) (must be <= %lu)\n",
> + cr, cr / 1000000, cr_mod);
The management of kernel log levels looks pretty strange. As far as I
understand there is no error on any clock rate, I'd recommend to keep
only one information message.
> + /*
> + * Datasheet named it "Die Bonding ID"
> + * I expect to be a sort of Security System Revision number.
> + * Since the A80 seems to have an other version of SS
> + * this info could be useful
> + */
> + writel(SS_ENABLED, ss->base + SS_CTL);
> + v = readl(ss->base + SS_CTL);
> + v >>= 16;
> + v &= 0x07;
> + dev_info(&pdev->dev, "Die ID %d\n", v);
> + writel(0, ss->base + SS_CTL);
> +
> + ss->dev = &pdev->dev;
> +
> + mutex_init(&ss->lock);
> + mutex_init(&ss->bufin_lock);
> + mutex_init(&ss->bufout_lock);
> +
> + err = crypto_register_ahash(&sunxi_md5_alg);
> + if (err)
> + goto error_md5;
> + err = crypto_register_ahash(&sunxi_sha1_alg);
> + if (err)
> + goto error_sha1;
> + err = crypto_register_algs(sunxi_cipher_algs,
> + ARRAY_SIZE(sunxi_cipher_algs));
> + if (err)
> + goto error_ciphers;
> +
> + return 0;
> +error_ciphers:
> + crypto_unregister_ahash(&sunxi_sha1_alg);
> +error_sha1:
> + crypto_unregister_ahash(&sunxi_md5_alg);
> +error_md5:
> + clk_disable_unprepare(ss->ssclk);
> + clk_disable_unprepare(ss->busclk);
> + return err;
> +}
> +
> +static int __exit sunxi_ss_remove(struct platform_device *pdev)
> +{
> + if (!pdev->dev.of_node)
> + return 0;
Redundant check.
> +
> + crypto_unregister_ahash(&sunxi_md5_alg);
> + crypto_unregister_ahash(&sunxi_sha1_alg);
> + crypto_unregister_algs(sunxi_cipher_algs,
> + ARRAY_SIZE(sunxi_cipher_algs));
> +
> + if (ss->buf_in != NULL)
> + kfree(ss->buf_in);
> + if (ss->buf_out != NULL)
> + kfree(ss->buf_out);
> +
> + writel(0, ss->base + SS_CTL);
> + clk_disable_unprepare(ss->busclk);
> + clk_disable_unprepare(ss->ssclk);
> + return 0;
> +}
> +
> +static const struct of_device_id a20ss_crypto_of_match_table[] = {
> + { .compatible = "allwinner,sun7i-a20-crypto" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, a20ss_crypto_of_match_table);
> +
> +static struct platform_driver sunxi_ss_driver = {
> + .probe = sunxi_ss_probe,
> + .remove = __exit_p(sunxi_ss_remove),
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "sunxi-ss",
> + .of_match_table = a20ss_crypto_of_match_table,
> + },
> +};
> +
> +module_platform_driver(sunxi_ss_driver);
> +
> +MODULE_DESCRIPTION("Allwinner Security System cryptographic accelerator");
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@xxxxxxxxx>");
> diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-hash.c b/drivers/crypto/sunxi-ss/sunxi-ss-hash.c
> new file mode 100644
> index 0000000..ec8758f
> --- /dev/null
> +++ b/drivers/crypto/sunxi-ss/sunxi-ss-hash.c
> @@ -0,0 +1,445 @@
> +/*
> + * sunxi-ss-hash.c - hardware cryptographic accelerator for Allwinner A20 SoC
> + *
> + * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@xxxxxxxxx>
> + *
> + * This file add support for MD5 and SHA1.
> + *
> + * You could find the datasheet in Documentation/arm/sunxi/README
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#include "sunxi-ss.h"
> +
> +/* This is a totaly arbitrary value */
> +#define SS_TIMEOUT 100
> +
> +extern struct sunxi_ss_ctx *ss;
> +
> +int sunxi_hash_crainit(struct crypto_tfm *tfm)
> +{
> + crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
> + sizeof(struct sunxi_req_ctx));
> + return 0;
> +}
> +
> +/* sunxi_hash_init: initialize request context */
> +int sunxi_hash_init(struct ahash_request *areq)
> +{
> + const char *hash_type;
> + struct sunxi_req_ctx *op = ahash_request_ctx(areq);
> +
> + memset(op, 0, sizeof(struct sunxi_req_ctx));
> +
> + hash_type = crypto_tfm_alg_name(areq->base.tfm);
> +
> + if (strcmp(hash_type, "sha1") == 0)
> + op->mode = SS_OP_SHA1;
> + if (strcmp(hash_type, "md5") == 0)
> + op->mode = SS_OP_MD5;
> + if (op->mode == 0)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static u32 rx_cnt;
> +
> +inline void ss_writer(const u32 v)
> +{
> + u32 spaces;
> +
> + writel(v, ss->base + SS_RXFIFO);
> + rx_cnt--;
> + while (rx_cnt == 0) {
> + spaces = readl_relaxed(ss->base + SS_FCSR);
> + rx_cnt = SS_RXFIFO_SPACES(spaces);
> + }
> +}
> +
> +inline void ss_writer_relaxed(const u32 v)
> +{
> + u32 spaces;
> +
> + writel_relaxed(v, ss->base + SS_RXFIFO);
> + rx_cnt--;
> + while (rx_cnt == 0) {
> + spaces = readl_relaxed(ss->base + SS_FCSR);
> + rx_cnt = SS_RXFIFO_SPACES(spaces);
> + }
> +}
> +
> +/*
> + * sunxi_hash_update: update hash engine
> + *
> + * Could be used for both SHA1 and MD5
> + * Write data by step of 32bits and put then in the SS.
> + *
> + * Since we cannot leave partial data and hash state in the engine,
> + * we need to get the hash state at the end of this function.
> + * After some work, I have found that we can get the hash state every 64o
> + *
> + * So the first work is to get the number of bytes to write to SS modulo 64
> + * The extra bytes will go to two different destination:
> + * op->wait for full 32bits word
> + * op->wb (waiting bytes) for partial 32 bits word
> + * So we can have up to (64/4)-1 op->wait words and 0/1/2/3 bytes in wb
> + *
> + * So at the begin of update()
> + * if op->nwait * 4 + areq->nbytes < 64
> + * => all data writed to wait buffers and end=0
> + * if not write all nwait to the device and position end to complete to 64o
> + *
> + * example 1:
> + * update1 60o => nwait=15
> + * update2 60o => need one more word to have 64o
> + * end=4
> + * so write all data in op->wait and one word of SGs
> + * write remaining data in op->wait
> + * final state op->nwait=14
> + */
> +int sunxi_hash_update(struct ahash_request *areq)
> +{
> + u32 v, ivmode = 0;
> + unsigned int i = 0;
> + /*
> + * i is the total bytes read from SGs, to be compared to areq->nbytes
> + * i is important because we cannot rely on SG length since the sum of
> + * SG->length could be greater than areq->nbytes
> + */
> +
> + struct sunxi_req_ctx *op = ahash_request_ctx(areq);
> + struct scatterlist *in_sg;
> + unsigned int in_i = 0; /* advancement in the current SG */
> + u64 end;
> + /*
> + * end is the position when we need to stop writing to the device,
> + * to be compared to i
> + */
> + int in_r;
> + void *src_addr;
> +
> + dev_dbg(ss->dev, "%s %s bc=%llu len=%u mode=%x bw=%u ww=%u",
> + __func__, crypto_tfm_alg_name(areq->base.tfm),
> + op->byte_count, areq->nbytes, op->mode,
> + op->nbw, op->nwait);
> +
> + if (areq->nbytes == 0)
> + return 0;
> +
> + end = ((areq->nbytes + op->nwait * 4 + op->nbw) / 64) * 64
> + - op->nbw - op->nwait * 4;
> +
> + if (end > areq->nbytes || areq->nbytes - end > 63) {
> + dev_err(ss->dev, "ERROR: Bound error %llu %u\n",
> + end, areq->nbytes);
> + return -EINVAL;
> + }
> +
> + if (op->nwait > 0 && end > 0) {
> + /* a precedent update was done */
> + for (i = 0; i < op->nwait; i++) {
> + ss_writer(op->wait[i]);
> + op->byte_count += 4;
> + }
> + op->nwait = 0;
> + }
> +
> + mutex_lock(&ss->lock);
> + /*
> + * if some data have been processed before,
> + * we need to restore the partial hash state
> + */
> + if (op->byte_count > 0) {
> + ivmode = SS_IV_ARBITRARY;
> + for (i = 0; i < 5; i++)
> + writel(op->hash[i], ss->base + SS_IV0 + i * 4);
> + }
> + /* Enable the device */
> + writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL);
> +
> + rx_cnt = 0;
> + i = 0;
> +
> + in_sg = areq->src;
> + src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
> + if (src_addr == NULL) {
> + mutex_unlock(&ss->lock);
> + dev_err(ss->dev, "ERROR: Cannot kmap source buffer\n");
> + return -EFAULT;
> + }
> + do {
> + /*
> + * step 1, if some bytes remains from last SG,
> + * try to complete them to 4 and send that word
> + */
> + if (op->nbw > 0) {
> + while (op->nbw < 4 && i < areq->nbytes &&
> + in_i < in_sg->length) {
> + op->wb |= (*(u8 *)(src_addr + in_i))
> + << (8 * op->nbw);
> + dev_dbg(ss->dev, "%s Complete w=%d wb=%x\n",
> + __func__, op->nbw, op->wb);
> + i++;
> + in_i++;
> + op->nbw++;
> + }
> + if (op->nbw == 4) {
> + if (i <= end) {
> + ss_writer(op->wb);
> + op->byte_count += 4;
> + } else {
> + op->wait[op->nwait] = op->wb;
> + op->nwait++;
> + dev_dbg(ss->dev, "%s Keep %u bytes after %llu\n",
> + __func__, op->nwait, end);
> + }
> + op->nbw = 0;
> + op->wb = 0;
> + }
> + }
> + /* step 2, main loop, read data 4bytes at a time */
> + while (i < areq->nbytes && in_i < in_sg->length) {
> + /* how many bytes we can read, (we need 4) */
> + in_r = min(in_sg->length - in_i, areq->nbytes - i);
> + if (in_r < 4) {
> + /* Not enough data to write to the device */
> + op->wb = 0;
> + while (in_r > 0) {
> + op->wb |= (*(u8 *)(src_addr + in_i))
> + << (8 * op->nbw);
> + dev_dbg(ss->dev, "%s ending bw=%d wb=%x\n",
> + __func__, op->nbw, op->wb);
> + in_r--;
> + i++;
> + in_i++;
> + op->nbw++;
> + }
> + goto nextsg;
> + }
> + v = *(u32 *)(src_addr + in_i);
> + if (i < end) {
> + /* last write must be done without relaxed */
> + if (i + 4 >= end)
> + ss_writer(v);
> + else
> + ss_writer_relaxed(v);
> + i += 4;
> + op->byte_count += 4;
> + in_i += 4;
> + } else {
> + op->wait[op->nwait] = v;
> + i += 4;
> + in_i += 4;
> + op->nwait++;
> + dev_dbg(ss->dev, "%s Keep word ww=%u after %llu\n",
> + __func__, op->nwait, end);
> + if (op->nwait > 15) {
> + dev_err(ss->dev, "FATAL: Cannot enqueue more, bug?\n");
> + writel(0, ss->base + SS_CTL);
> + mutex_unlock(&ss->lock);
> + return -EIO;
> + }
> + }
> + }
> +nextsg:
> + /* Nothing more to read in this SG */
> + if (in_i == in_sg->length) {
> + kunmap(sg_page(in_sg));
> + do {
> + in_sg = sg_next(in_sg);
> + } while (in_sg != NULL && in_sg->length == 0);
> + in_i = 0;
> + if (in_sg != NULL) {
> + src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
> + if (src_addr == NULL) {
> + mutex_unlock(&ss->lock);
> + dev_err(ss->dev, "ERROR: Cannot kmap source buffer\n");
> + return -EFAULT;
> + }
> + }
> + }
> + } while (in_sg != NULL && i < areq->nbytes);
> +
> + /* ask the device to finish the hashing */
> + writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL);
> + i = 0;
> + do {
> + v = readl(ss->base + SS_CTL);
> + i++;
> + } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0);
> + if (i >= SS_TIMEOUT) {
> + dev_err(ss->dev, "ERROR: %s hash end timeout after %d loop, CTL=%x\n",
> + __func__, i, v);
> + writel(0, ss->base + SS_CTL);
> + mutex_unlock(&ss->lock);
> + return -EIO;
> + }
> +
> + /* get the partial hash */
> + if (op->mode == SS_OP_SHA1) {
> + for (i = 0; i < 5; i++)
> + op->hash[i] = readl(ss->base + SS_MD0 + i * 4);
> + } else {
> + for (i = 0; i < 4; i++)
> + op->hash[i] = readl(ss->base + SS_MD0 + i * 4);
> + }
> +
> + writel(0, ss->base + SS_CTL);
> + mutex_unlock(&ss->lock);
> + return 0;
> +}
> +
> +/*
> + * sunxi_hash_final: finalize hashing operation
> + *
> + * If we have some remaining bytes, we write them.
> + * Then ask the SS for finalizing the hashing operation
> + */
> +int sunxi_hash_final(struct ahash_request *areq)
> +{
> + u32 v, ivmode = 0;
> + unsigned int i;
> + int zeros;
> + unsigned int index, padlen;
> + __be64 bits;
> + struct sunxi_req_ctx *op = ahash_request_ctx(areq);
> +
> + dev_dbg(ss->dev, "%s byte=%llu len=%u mode=%x bw=%u %x h=%x ww=%u",
> + __func__, op->byte_count, areq->nbytes, op->mode,
> + op->nbw, op->wb, op->hash[0], op->nwait);
> +
> + mutex_lock(&ss->lock);
> + rx_cnt = 0;
> +
> + /*
> + * if we have already writed something,
> + * restore the partial hash state
> + */
> + if (op->byte_count > 0) {
> + ivmode = SS_IV_ARBITRARY;
> + for (i = 0; i < 5; i++)
> + writel(op->hash[i], ss->base + SS_IV0 + i * 4);
> + }
> + writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL);
> +
> + /* write the remaining words of the wait buffer */
> + if (op->nwait > 0) {
> + for (i = 0; i < op->nwait; i++) {
> + v = op->wait[i];
> + ss_writer(v);
> + op->byte_count += 4;
> + dev_dbg(ss->dev, "%s write %llu i=%u %x\n",
> + __func__, op->byte_count, i, v);
> + }
> + op->nwait = 0;
> + }
> +
> + /* write the remaining bytes of the nbw buffer */
> + if (op->nbw > 0) {
> + op->wb |= ((1 << 7) << (op->nbw * 8));
> + ss_writer(op->wb);
> + } else {
> + ss_writer((1 << 7));
> + }
> +
> + /*
> + * number of space to pad to obtain 64o minus 8(size) minus 4 (final 1)
> + * I take the operations from other md5/sha1 implementations
> + */
> +
> + /* we have already send 4 more byte of which nbw data */
> + if (op->mode == SS_OP_MD5) {
> + index = (op->byte_count + 4) & 0x3f;
> + op->byte_count += op->nbw;
> + if (index > 56)
> + zeros = (120 - index) / 4;
> + else
> + zeros = (56 - index) / 4;
> + } else {
> + op->byte_count += op->nbw;
> + index = op->byte_count & 0x3f;
> + padlen = (index < 56) ? (56 - index) : ((64+56) - index);
> + zeros = (padlen - 1) / 4;
> + }
> + for (i = 0; i < zeros; i++)
> + ss_writer(0);
> +
> + /* write the length of data */
> + if (op->mode == SS_OP_SHA1) {
> + bits = cpu_to_be64(op->byte_count << 3);
> + ss_writer(bits & 0xffffffff);
> + ss_writer((bits >> 32) & 0xffffffff);
> + } else {
> + ss_writer((op->byte_count << 3) & 0xffffffff);
> + ss_writer((op->byte_count >> 29) & 0xffffffff);
> + }
> +
> + /* Tell the SS to stop the hashing */
> + writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL);
> +
> + /*
> + * Wait for SS to finish the hash.
> + * The timeout could happend only in case of bad overcloking
> + * or driver bug.
> + */
> + i = 0;
> + do {
> + v = readl(ss->base + SS_CTL);
> + i++;
> + } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0);
> + if (i >= SS_TIMEOUT) {
> + dev_err(ss->dev, "ERROR: hash end timeout %d>%d ctl=%x len=%u\n",
> + i, SS_TIMEOUT, v, areq->nbytes);
> + writel(0, ss->base + SS_CTL);
> + mutex_unlock(&ss->lock);
> + return -EIO;
> + }
> +
> + /* Get the hash from the device */
> + if (op->mode == SS_OP_SHA1) {
> + for (i = 0; i < 5; i++) {
> + v = cpu_to_be32(readl(ss->base + SS_MD0 + i * 4));
> + memcpy(areq->result + i * 4, &v, 4);
> + }
> + } else {
> + for (i = 0; i < 4; i++) {
> + v = readl(ss->base + SS_MD0 + i * 4);
> + memcpy(areq->result + i * 4, &v, 4);
> + }
> + }
> + writel(0, ss->base + SS_CTL);
> + mutex_unlock(&ss->lock);
> + return 0;
> +}
> +
> +/* sunxi_hash_finup: finalize hashing operation after an update */
> +int sunxi_hash_finup(struct ahash_request *areq)
> +{
> + int err;
> +
> + err = sunxi_hash_update(areq);
> + if (err != 0)
> + return err;
> +
> + return sunxi_hash_final(areq);
> +}
> +
> +/* combo of init/update/final functions */
> +int sunxi_hash_digest(struct ahash_request *areq)
> +{
> + int err;
> +
> + err = sunxi_hash_init(areq);
> + if (err != 0)
> + return err;
> +
> + err = sunxi_hash_update(areq);
> + if (err != 0)
> + return err;
> +
> + return sunxi_hash_final(areq);
> +}
> diff --git a/drivers/crypto/sunxi-ss/sunxi-ss.h b/drivers/crypto/sunxi-ss/sunxi-ss.h
> new file mode 100644
> index 0000000..331e75b
> --- /dev/null
> +++ b/drivers/crypto/sunxi-ss/sunxi-ss.h
> @@ -0,0 +1,193 @@
> +/*
> + * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC
> + *
> + * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@xxxxxxxxx>
> + *
> + * Support AES cipher with 128,192,256 bits keysize.
> + * Support MD5 and SHA1 hash algorithms.
> + * Support DES and 3DES
> + *
> + * You could find the datasheet in Documentation/arm/sunxi/README
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/crypto.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <crypto/scatterwalk.h>
> +#include <linux/scatterlist.h>
> +#include <linux/interrupt.h>
> +#include <linux/delay.h>
> +#include <crypto/md5.h>
> +#include <crypto/sha.h>
> +#include <crypto/hash.h>
> +#include <crypto/internal/hash.h>
> +#include <crypto/aes.h>
> +#include <crypto/des.h>
> +#include <crypto/internal/rng.h>
> +
> +#define SS_CTL 0x00
> +#define SS_KEY0 0x04
> +#define SS_KEY1 0x08
> +#define SS_KEY2 0x0C
> +#define SS_KEY3 0x10
> +#define SS_KEY4 0x14
> +#define SS_KEY5 0x18
> +#define SS_KEY6 0x1C
> +#define SS_KEY7 0x20
> +
> +#define SS_IV0 0x24
> +#define SS_IV1 0x28
> +#define SS_IV2 0x2C
> +#define SS_IV3 0x30
> +
> +#define SS_CNT0 0x34
> +#define SS_CNT1 0x38
> +#define SS_CNT2 0x3C
> +#define SS_CNT3 0x40
> +
> +#define SS_FCSR 0x44
> +#define SS_ICSR 0x48
> +
> +#define SS_MD0 0x4C
> +#define SS_MD1 0x50
> +#define SS_MD2 0x54
> +#define SS_MD3 0x58
> +#define SS_MD4 0x5C
> +
> +#define SS_RXFIFO 0x200
> +#define SS_TXFIFO 0x204
> +
> +/* SS_CTL configuration values */
> +
> +/* PRNG generator mode - bit 15 */
> +#define SS_PRNG_ONESHOT (0 << 15)
> +#define SS_PRNG_CONTINUE (1 << 15)
> +
> +/* IV mode for hash */
> +#define SS_IV_ARBITRARY (1 << 14)
> +
> +/* SS operation mode - bits 12-13 */
> +#define SS_ECB (0 << 12)
> +#define SS_CBC (1 << 12)
> +#define SS_CNT (2 << 12)
> +
> +/* Counter width for CNT mode - bits 10-11 */
> +#define SS_CNT_16BITS (0 << 10)
> +#define SS_CNT_32BITS (1 << 10)
> +#define SS_CNT_64BITS (2 << 10)
> +
> +/* Key size for AES - bits 8-9 */
> +#define SS_AES_128BITS (0 << 8)
> +#define SS_AES_192BITS (1 << 8)
> +#define SS_AES_256BITS (2 << 8)
> +
> +/* Operation direction - bit 7 */
> +#define SS_ENCRYPTION (0 << 7)
> +#define SS_DECRYPTION (1 << 7)
> +
> +/* SS Method - bits 4-6 */
> +#define SS_OP_AES (0 << 4)
> +#define SS_OP_DES (1 << 4)
> +#define SS_OP_3DES (2 << 4)
> +#define SS_OP_SHA1 (3 << 4)
> +#define SS_OP_MD5 (4 << 4)
> +#define SS_OP_PRNG (5 << 4)
> +
> +/* Data end bit - bit 2 */
> +#define SS_DATA_END (1 << 2)
> +
> +/* PRNG start bit - bit 1 */
> +#define SS_PRNG_START (1 << 1)
> +
> +/* SS Enable bit - bit 0 */
> +#define SS_DISABLED (0 << 0)
> +#define SS_ENABLED (1 << 0)
> +
> +/* SS_FCSR configuration values */
> +/* RX FIFO status - bit 30 */
> +#define SS_RXFIFO_FREE (1 << 30)
> +
> +/* RX FIFO empty spaces - bits 24-29 */
> +#define SS_RXFIFO_SPACES(val) (((val) >> 24) & 0x3f)
> +
> +/* TX FIFO status - bit 22 */
> +#define SS_TXFIFO_AVAILABLE (1 << 22)
> +
> +/* TX FIFO available spaces - bits 16-21 */
> +#define SS_TXFIFO_SPACES(val) (((val) >> 16) & 0x3f)
> +
> +#define SS_RXFIFO_EMP_INT_PENDING (1 << 10)
> +#define SS_TXFIFO_AVA_INT_PENDING (1 << 8)
> +#define SS_RXFIFO_EMP_INT_ENABLE (1 << 2)
> +#define SS_TXFIFO_AVA_INT_ENABLE (1 << 0)
> +
> +/* SS_ICSR configuration values */
> +#define SS_ICS_DRQ_ENABLE (1 << 4)
> +
> +struct sunxi_ss_ctx {
> + void __iomem *base;
> + int irq;
> + struct clk *busclk;
> + struct clk *ssclk;
> + struct device *dev;
> + struct resource *res;
> + void *buf_in; /* pointer to data to be uploaded to the device */
> + size_t buf_in_size; /* size of buf_in */
> + void *buf_out;
> + size_t buf_out_size;
> + struct mutex lock; /* control the use of the device */
> + struct mutex bufout_lock; /* control the use of buf_out*/
> + struct mutex bufin_lock; /* control the sue of buf_in*/
> +};
> +
> +struct sunxi_tfm_ctx {
> + u32 key[AES_MAX_KEY_SIZE / 4];/* divided by sizeof(u32) */
> + u32 keylen;
> + u32 keymode;
> +};
> +
> +struct sunxi_req_ctx {
> + u32 mode;
> + u64 byte_count; /* number of bytes "uploaded" to the device */
> + u32 wb; /* a partial word waiting to be completed and
> + uploaded to the device */
> + /* number of bytes to be uploaded in the wb word */
> + unsigned int nbw;
> + u32 hash[5];
> + u32 wait[64];
> + unsigned int nwait;
> +};
> +
> +#define SS_SEED_LEN (192/8)
> +#define SS_DATA_LEN (160/8)
> +
> +struct prng_context {
> + u32 seed[SS_SEED_LEN/4];
> + unsigned int slen;
> +};
> +
> +int sunxi_hash_crainit(struct crypto_tfm *tfm);
> +int sunxi_hash_init(struct ahash_request *areq);
> +int sunxi_hash_update(struct ahash_request *areq);
> +int sunxi_hash_final(struct ahash_request *areq);
> +int sunxi_hash_finup(struct ahash_request *areq);
> +int sunxi_hash_digest(struct ahash_request *areq);
> +int sunxi_hash_export(struct ahash_request *areq, void *out);
> +int sunxi_hash_import(struct ahash_request *areq, const void *in);
> +
> +int sunxi_ss_aes_poll(struct ablkcipher_request *areq, u32 mode);
> +int sunxi_ss_des_poll(struct ablkcipher_request *areq, u32 mode);
> +int sunxi_ss_cipher_init(struct crypto_tfm *tfm);
> +int sunxi_ss_cipher_encrypt(struct ablkcipher_request *areq);
> +int sunxi_ss_cipher_decrypt(struct ablkcipher_request *areq);
> +int sunxi_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
> + unsigned int keylen);
> +int sunxi_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
> + unsigned int keylen);
> +int sunxi_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
> + unsigned int keylen);
>
--
With best wishes,
Vladimir
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/