[PATCH 13/13] power: reset: ltc2952: document optional trigger behavior

[Frans Klaver]

Document the fact that the trigger signal is now optional, and describe
the behavior when this is used.

While at it, fix a typo, and paraphrase a sentence to be less platform
specific.

Signed-off-by: Frans Klaver <frans.klaver@xxxxxxxxx>
---
 .../devicetree/bindings/power/reset/ltc2952-poweroff.txt    | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
index 0c94c63..cd2d7f5 100644
--- a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
+++ b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
@@ -1,20 +1,23 @@
 Binding for the LTC2952 PowerPath controller
 
 This chip is used to externally trigger a system shut down. Once the trigger has
-been sent, the chips' watchdog has to be reset to gracefully shut down.
-If the Linux systems decides to shut down it powers off the platform via the
-kill signal.
+been sent, the chip's watchdog has to be reset to gracefully shut down.
+A full powerdown can be triggered via the kill signal.
 
 Required properties:
 
 - compatible:		Must contain: "lltc,ltc2952"
-- trigger-gpios:	phandle + gpio-specifier for the GPIO connected to the
-			chip's trigger line
 - watchdog-gpios:	phandle + gpio-specifier for the GPIO connected to the
 			chip's watchdog line
 - kill-gpios:		phandle + gpio-specifier for the GPIO connected to the
 			chip's kill line
 
+Optional properties:
+- trigger-gpios:	phandle + gpio-specifier for the GPIO connected to the
+			chip's trigger line. If this property is not set, the
+			trigger function is ignored and the chip is kept alive
+			until an explicit kill signal is received
+
 Example:
 
 ltc2952 {
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/