[PATCH] drm/panel: ld9040: Update calls to gpiod_get*()
From: Alexandre Courbot
Date: Thu Oct 23 2014 - 04:16:31 EST
Add the new flags argument to calls of (devm_)gpiod_get*() and
remove any direction setting code afterwards.
Currently both forms (with or without the flags argument)
are valid thanks to transitional macros in
<linux/gpio/consumer.h>. These macros will be removed once
all consumers are updated and the flags argument will become
compulsary.
Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
---
drivers/gpu/drm/panel/panel-ld9040.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-ld9040.c b/drivers/gpu/drm/panel/panel-ld9040.c
index 42ac67b21e9f..dd1d3f2e624e 100644
--- a/drivers/gpu/drm/panel/panel-ld9040.c
+++ b/drivers/gpu/drm/panel/panel-ld9040.c
@@ -336,17 +336,12 @@ static int ld9040_probe(struct spi_device *spi)
if (ret < 0)
return ret;
- ctx->reset_gpio = devm_gpiod_get(dev, "reset");
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(ctx->reset_gpio)) {
dev_err(dev, "cannot get reset-gpios %ld\n",
PTR_ERR(ctx->reset_gpio));
return PTR_ERR(ctx->reset_gpio);
}
- ret = gpiod_direction_output(ctx->reset_gpio, 1);
- if (ret < 0) {
- dev_err(dev, "cannot configure reset-gpios %d\n", ret);
- return ret;
- }
spi->bits_per_word = 9;
ret = spi_setup(spi);
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/