Re: [PATCH v2] Staging: iio: adc: fix line over 80 characters

From: Sudip Mukherjee
Date: Thu Oct 23 2014 - 05:46:41 EST


On Thu, Oct 23, 2014 at 01:47:37AM +0200, Hartmut Knaack wrote:
> Sudip Mukherjee schrieb am 22.10.2014 06:21:
> > On Tue, Oct 21, 2014 at 05:56:47PM -0500, Brian Vandre wrote:
> >> This fixes the 2 checkpatch.pl warnings:
> >> WARNING: line over 80 characters
> >>
> > please check your patch with --strict option of checkpatch.pl , and you will get :
> > "Alignment should match open parenthesis" .
> >
> Good point, but what solution would you propose?
when you are breaking the line , make a point to align the next line with the open parenthesis.
like :
- mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
+ mxs_lradc_reg_wrt(lradc,
+ LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */

I have seen in many patches Greg commenting to resend the patch after aligning it.
so my opinion , even though it is optional , better to use it while sending a patch , so that no one can say about that.

happened to me in few of my initial patches. :)


> > thanks
> > sudip
> >
> >> Signed-off-by: Brian Vandre <bvandre@xxxxxxxxx>
> >> ---
> >> drivers/staging/iio/adc/mxs-lradc.c | 6 ++++--
> >> 1 file changed, 4 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
> >> index 32a1926..62449a6 100644
> >> --- a/drivers/staging/iio/adc/mxs-lradc.c
> >> +++ b/drivers/staging/iio/adc/mxs-lradc.c
> >> @@ -455,7 +455,8 @@ static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch)
> >> * SoC's delay unit and start the conversion later
> >> * and automatically.
> >> */
> >> - mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
> >> + mxs_lradc_reg_wrt(lradc,
> >> + LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
> >> LRADC_DELAY_TRIGGER_DELAYS(1 << 3) | /* trigger DELAY unit#3 */
> >> LRADC_DELAY_KICK |
> >> LRADC_DELAY_DELAY(lradc->settling_delay),
> >> @@ -513,7 +514,8 @@ static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1,
> >> * SoC's delay unit and start the conversion later
> >> * and automatically.
> >> */
> >> - mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
> >> + mxs_lradc_reg_wrt(lradc,
> >> + LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
> >> LRADC_DELAY_TRIGGER_DELAYS(1 << 3) | /* trigger DELAY unit#3 */
> >> LRADC_DELAY_KICK |
> >> LRADC_DELAY_DELAY(lradc->settling_delay), LRADC_DELAY(2));
> >> --
> >> 1.9.1
> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> >> the body of a message to majordomo@xxxxxxxxxxxxxxx
> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
> >> Please read the FAQ at http://www.tux.org/lkml/
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/