[PATCH v3 3/5] PM / clock_ops: add and enable clocks always if !CONFIG_PM_RUNTIME
From: Grygorii Strashko
Date: Thu Oct 23 2014 - 10:24:06 EST
Device's clocks need to be enabled always at probing time
if !CONFIG_PM_RUNTIME - in that way, device will become accessible
and, later, its clocks can be disabled/enabled during system
suspend/resume by using pm_clk_suspend/pm_clk_resume APIs.
But now, the clocks management code doesn't enable clocks when
clocks are being registered per-device by using pm_clk_add/_clk().
So, update pm_clk_acquire(), which is called from pm_clk_add/_clk(),
to enable clocks always if !CONFIG_PM_RUNTIME.
Also, Platform PM domains drivers will not need to add code like below
each time they need to handle the case when !CONFIG_PM_RUNTIME [1 - 3]:
if (!IS_ENABLED(CONFIG_PM_RUNTIME)) {
ret = pm_clk_resume(dev);
if (ret) {
dev_err(dev, "pm_clk_resume failed %d\n", ret);
goto clk_err;
};
}
[1] https://lkml.org/lkml/2014/10/3/306
[2] https://lkml.org/lkml/2014/10/16/305
[3] https://lkml.org/lkml/2014/10/20/249
CC: Santosh Shilimkar <ssantosh@xxxxxxxxxx>
CC: Kevin Hilman <khilman@xxxxxxxxxx>
CC: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
CC: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
CC: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
drivers/base/power/clock_ops.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index c3b44c1..87d07dc 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -68,6 +68,10 @@ static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce)
ce->status = PCE_STATUS_ACQUIRED;
dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
}
+
+ if (!IS_ENABLED(CONFIG_PM_RUNTIME)) {
+ __pm_clk_enable(dev, ce);
+ }
}
static int __pm_clk_add(struct device *dev, const char *con_id,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/