Re: [PATCH v4] PCI: add kernel parameter to override devid<->driver mapping.

[Alex Williamson]

On Thu, 2014-10-23 at 17:33 +0300, Marcel Apfelbaum wrote:
> On Thu, 2014-10-23 at 07:57 -0600, Alex Williamson wrote:
> > On Thu, 2014-10-23 at 13:44 +0000, Stuart Yoder wrote:
> > > 
> > > > -----Original Message-----
> > > > From: Alex Williamson [mailto:alex.williamson@xxxxxxxxxx]
> > > > Sent: Wednesday, October 22, 2014 1:33 PM
> > > > To: Marcel Apfelbaum
> > > > Cc: linux-pci@xxxxxxxxxxxxxxx; bhelgaas@xxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; marcel@xxxxxxxxxx;
> > > > mst@xxxxxxxxxx; Yoder Stuart-B08248
> > > > Subject: Re: [PATCH v4] PCI: add kernel parameter to override devid<->driver mapping.
> > > > 
> > > > [cc+ stuart]
> > > > 
> > > > On Mon, 2014-10-20 at 17:04 +0300, Marcel Apfelbaum wrote:
> > > > > Scanning a lot of devices during boot requires a lot of time.
> > > > > On other scenarios there is a need to bind a driver to a specific slot.
> > > > >
> > > > > Binding devices to pci-stub driver does not work,
> > > > > as it will not differentiate between devices of the
> > > > > same type. Using some start scripts is error prone.
> > > > >
> > > > > The solution leverages driver_override functionality introduced by
> > > > >
> > > > > 	commit: 782a985d7af26db39e86070d28f987cad21313c0
> > > > > 	Author: Alex Williamson <alex.williamson@xxxxxxxxxx>
> > > > > 	Date:   Tue May 20 08:53:21 2014 -0600
> > > > >
> > > > >     	PCI: Introduce new device binding path using pci_dev.driver_override
> > > > >
> > > > > In order to bind PCI slots to specific drivers use:
> > > > > 	pci=driver[xxxx:xx:xx.x]=foo,driver[xxxx:xx:xx.x]=bar,...
> > > > >
> > > > > Signed-off-by: Marcel Apfelbaum <marcel.a@xxxxxxxxxx>
> > > > > ---
> > > > > v3 -> v4:
> > > > >  - Addressed Alex Williamson's comments:
> > > > >    - Modified the type of driver_override_entry's fields
> > > > >    - Used PCI_DEVFN when appropriated
> > > > >    - Removed redundant checks
> > > > >    - Replaced BUG_ON with pr_err messages
> > > > >    - Simpler command line parsing
> > > > >  - Addressed Michael S. Tsirkin comments
> > > > >    - removed DRIVER_OVERRIDE_NAME_LENGTH limitation
> > > > > v2 -> v3:
> > > > >  - Corrected subject line
> > > > > v1 -> v2:
> > > > >  - Addressed Michael S. Tsirkin comments
> > > > >    - Removed 32 slots limitation
> > > > >    - Better handling of memory allocation failures
> > > > >      (preferred BUG_ON over error messages)
> > > > >  - Addressed Alex Williamson's comments:
> > > > >    - Modified commit message to show parameter usage more clear.
> > > > >  - I preferred to re-use parse_args instead of manually using
> > > > >    strstr in order to better comply with command line parsing
> > > > >    rules.
> > > > >  - I didn't use any locking when parsing the command line args
> > > > >    (see parse_done usage) assuming that first call will be
> > > > >    early in system boot and no race can occur. Please correct
> > > > >    me if I am wrong.
> > > > >
> > > > > Notes:
> > > > >  - I have further ideas on top of this patch based on your reviews.
> > > > >    I thought of:
> > > > >    - Use wildcards to specify entire buses/devices, something like:
> > > > >      	driver[0001:02:*.*]=pci-stub
> > > > >    - Use comma to separate several devices:
> > > > >      	driver[0001:02:03.4,0001:02:04.0,...]=pci-stub
> > > > >    - Make domain optional:
> > > > >    	driver[00:03.0]=pci-stub
> > > > >
> > > > > Comments will be appreciated,
> > > > > Thanks,
> > > > > Marcel
> > > > >  Documentation/kernel-parameters.txt |   4 ++
> > > > >  drivers/pci/bus.c                   | 111 ++++++++++++++++++++++++++++++++++++
> > > > >  drivers/pci/pci.c                   |   2 +
> > > > >  3 files changed, 117 insertions(+)
> > > > 
> > > > The driver_override feature that we're making use of here is also going
> > > > to be supported by platform devices and potentially more bustypes in the
> > > > future, so I'm concerned that making a pci specific kernel parameter is
> > > > too shortsighted.  Instead we could hook on to BUS_NOTIFY_ADD_DEVICE for
> > > > bustypes that support driver_override so we can have a common interface.
> > > > Perhaps:
> > > > 
> > > > driver_override=pci,0000:02:00.0=pci-stub;platform,fakename=vfio-platform
> > > > 
> > > > Finding delimiters that don't conflict may be challenging.
> > > 
> > > I think what you proposed works--  <bus-name>,<bus-dev>=<driver>;
> > > 
> > > Think that will work for PCI, platform, and the new fsl-mc bus we are working
> > > on.
> > > 
> > > > Also, can we
> > > > assume that bus-name:dev-name is unique for every bustype?  It is for
> > > > pci, platform?
> > > 
> > > I think that has to be the case.
> > > 
> > > > It also seems like there's a question of how long should this override
> > > > last and how does the user disable it?
> > > 
> > > Isn't that a general question for the "driver_overrride" mechanism?
> > > I'm forgetting if the mechanism in the kernel now has a way to disable
> > > it--  e.g. echo /dev/null > /sys/pci/devices/.../driver_override ??
> > > 
> > > So, it would last until explicitly disabled through sysfs.
> > 
> > Yes, when you set a driver_override on a device you cancel it by writing
> > a NULL string to the same interface.  The problem is that here we have a
> > new entity in the driver scan that keeps re-applying the driver_override
> > as devices are scanned with no way to stop it.  So you can certainly
> > undo the immediate effect and bind the device to another driver, but if
> > the device is removed and re-scanned there's no way to stop if from
> > re-applying the override.  Thanks,
> Hi Alex,
> 
> I checked the above scenario and after driver_override is cleared
> an we do bind/unbind, the mapping defined in the command line
> does not apply anymore.
> 
> My steps were:
> 1. define the override in command-line -> the mapped driver is used instead of the native one
> 2. unbind the device from the slot -> no driver for device
> 3. remove the driver_override mapping form the slot -> no mapping defined
> 3, bind the device again -> native driver in use.

That's not the scenario I'm describing.  Use the remove and rescan sysfs
attributes to do a software hotplug and you'll see that the
driver_override will always be re-applied to the device.  For example:

# echo "" > /sys/bus/pci/devices/0000:02:00.0/driver_override
# echo 1 > /sys/bus/pci/devices/0000:02:00.0/remove
# echo 1 > /sys/bus/pci/rescan
# cat /sys/bus/pci/devices/0000:02:00.0/driver_override

I expect the last step will show the original override re-applied.
Thanks,

Alex

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/